Housing Urban and Rular Development Government Departments Closing in 8 days TDR #58589338

Tender For Renewal Coat / Macdamization Of Road L052 Km 3Rd To Shatgund Bala, Package No. Jk08-79 Under Incentive Fund For The Year 2026-27 & 2027-28 Pmgsy Division Handwara

Issued by Government Departments · Kupwara, Jammu and Kashmir
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Nov 2026
8 days left
EMD
2.67 Lakhs
Bank guarantee accepted
Document Fee
2600
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Renewal Coat / Macdamization Of Road L052 Km 3Rd To Shatgund Bala, Package No. Jk08-79 Under Incentive Fund For The Year 2026-27 & 2027-28 Pmgsy Division Handwara

BOQ

Name of Work:- Renewal coat / Macdamization of road L052 KM 3rd to Shatgund Bala, Package No. JK08-79 under Incentive Fund for the year 2026-27 & 2027-28 PMGSY Division Handwara
Sl. No. Item Description
1Part A:- Initial Rehabilitation
2CC Drain Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom ordinary soil.
3Type B (First class bedding) Laying (First Class) bedding on well compacted sand, moorum or approved granular material as per Clause 1105 (ii)
4Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 (P.C.C Grade M-10 Nominal mix 1:3:6).
5Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 (P.C.C Grade M-10 Nominal mix 1:3:6).
6Providing RCC in superstructure, M25 complete as per drawings and technical specifications Clause 615.710 and 1204.3.1
7Supplying , fitting and placing TMT bar reinforcement (Fe 415) in superstructure complete as per drawing and technical specification clauses 1002, 1010 and 1202
8RRM RWALL Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.
9Laying (First Class) bedding on well compacted sand, moorum or approved granular material ( Boulder) as per Clause 1105 (ii)
10Providing concrete for Plain / reinforced concrete in open foundation including dewatering complete as per drawings and technical specification clause 802,803, 1202 and 1203.Including loading, unloading,haulages, royality,octorie form work etc complete. P.C.C grade M-10
11Stone masonry work in cement mortar in Substructure complete as per drawing and technical specifications clauses 702,704, 1202 & 1204. Random Rubble Masonry, In cement mortar (1:6) mix.
12Random Rubble Masonry work Laid Dry complete as per drawing and technical specificatins Clauses 702, 707, 1202 & 1203. In Sub Structure
13'Backfilling behind abutment,wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 (12.10Granular material )
14Providing PCC M-20 architectural coping on the top of wing wall, return wall etc.complete as per drawing and technical specification Clauses 615, 710 and1204.3.11
15PIPE DIA 500 mm Earthwork in excavation for structures as per drawing and technical specification Clause 305.10 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material incld. its disposal loading and unloading dressing of sides and bottom and backfilling in trenches with excavated suitable material.
16Laying (First Class) bedding on well compacted sand, moorum or approved granular material as per Clause 1105 (ii)
17Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. (500 mm dia.)
18Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8
193MSpanCulvert Earthwork in excavation for structures as per drawing and technical specification Clause 305.10 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material incld. its disposal loading and unloading dressing of sides and bottom and backfilling in trenches with excavated suitable material.
20Laying (First Class) bedding on well compacted sand, moorum or approved granular material as per Clause 1105 (ii)
21Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 (P.C.C Grade M-10 Nominal mix 1:3:6)
22Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 (P.C.C Grade M-20 Nominal mix 1:2:4).
23Providing concrete for plain concrete in Sub structure complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 PCC Grade M 20(1:2:4)
24Providing concrete for reinforced concrete in Sub structure complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 PCC Grade M 20(1:2:4)
25Providing R.C.C. IN super structure. M 20 complete as per drawing and technical specifications clause 802, 803, 1202, &1203 (RCC Grade M-20 Nominal mix 1:2:2). Super str(13.1)
26Supplying , fitting and placing TMT bar reinforcement (Fe 415) in Foundation complete as per drawing and technical specification clauses 1002, 1010 and 1202
27Supplying , fitting and placing TMT bar reinforcement (Fe 415) in sub structure complete as per drawing and technical specification clauses 1002, 1010 and 1202
28Supplying , fitting and placing TMT bar reinforcement (Fe 415) in superstructure complete as per drawing and technical specification clauses 1002, 1010 and 1202
29Providing weepholes In brick masonry/stone masonry, plain / reinforced concrete abutments, wing wall. Return wall with 100mm dia AC pipe extending through the full width of the structures with slope of 1(V): 20(H) towards drawing face complete as per drawings and technical specifications clause 614, 709, 1204.3.7
30Dewatering of trenches by mechanical means/diversion of nallah by way of construction of ring bunds during execution of work if found necessary Including diversion of traffic, hire charges of private land used, hire charges of pipes required including cost and carrieges og all materials including RBM to be used for diversion of traffic during execution of work and making the things good after completion of job by way of removal of 9 diversion etc.
31Back filling: Back filling In foundation trenches as per drawing and technical specification clause 1108 Complet job
32CRATEWORK Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material
33Providing and laying of boulder apron/Quarry stones laid in wire crates with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid withstone boulders weighing not less than 25 kg each as per drawing and technical specifications Clause 1301
34Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 401.4 and TSC 408 (Granular Quarry material available at site.)
35Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 PCC M-15 Grade (Concrete band over Crates)
36Part B:-Renewal Part
37Scarifying the existing bituminous road surface to a depth of 150mm and disposal of scarified material within a lift 3m and lead upto 1 km as per TSC 301.4 (by mechanical means).
38Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502
39Granular sub-base/base/surface course with local materials/ Quarry (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408.
40Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406.
41Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
42Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504.
4320mm thick OGPC: Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.
44Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B using Bitumen grade (S-90)as per Technical Specification Clause 510 (Mechanical means)
45Hard Shoulders :- Granular sub-base/base/surface course with local materials/ Quarry (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408.
46Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications
47Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801
48Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 (ordinary km stone)
49Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD pecifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
50Rates (in Rs.) Applicable for routine maintenance before renewal will be as under *
511st year
522nd Year
533rd Year
544th Year
555th Year
56Rates (in Rs.) Applicable for routine maintenance After renewal will be as under *
571st year
582nd Year
593rd Year
604th Year
615th Year Total Routine Maintenance Rate Applicable Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58589338
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 27-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for Renewal Coat / Macdamization Of Road L052 Km 3Rd To Shatgund Bala, Package No. Jk08-79 Under Incentive Fund For The Year 2026-27 & 2027-28 Pmgsy Division Handwara
Basic Detail
Tender No EE/PMGSY/HND/e-Tendering/21 of 2026 27 Dated 18/11/2026
Bidding Type Tender
Location
City Kupwara
State Jammu and Kashmir
Key Dates
Publish Date 18 Nov 2026
Submission Date 27 Nov 2026
Open Date 30 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee 2600
EMD 2.67 Lakhs
Exemption Available
Document List
b82f1e05-84f4-4a6f-b0cf-6aec0aaf36d2.html
BOQ_236859.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Nov 30, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 11 days

Tender Documents

Download All (ZIP) ↓
html

b82f1e05-84f4-4a6f-b0cf-6aec0aaf36d2.html

xls

BOQ_236859.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender