Educational and Research Institute Government Departments Closing in 9 days TDR #58589323

Tender For Development Of Garden In Rajnagar Exploration Camp Of Cmpdi Regional Institute V, Bilaspur

Issued by Government Departments · Bastar, Chhattisgarh
Tender Value
11.93 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
9 days left
EMD
15000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bastar → Chhattisgarh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Development Of Garden In Rajnagar Exploration Camp Of Cmpdi Regional Institute V, Bilaspur

BOQ

Name of Work:- Development of Garden in Rajnagar Exploration Camp of CMPDI Regional Institute V, Bilaspur
Sl. No. Item Description
1Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared.
2Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth upto 50 m and lift upto 1.5 m, disposed soil to be levelled and neatly dressed: All Kinds of soil
3Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil
4Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
5Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
6Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same. All kinds of soil.
7Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level: 1:2:4 ( 1 Cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
8Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level: 1:4:8 ( 1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
9Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level: 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
10Centring and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete.
11Centring and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
12Centring and shuttering including strutting, propping etc. and removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts.
13Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more.
14Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of stepsand dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
15Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying coat of approved steel primer all complete.
16Steel work in built up tubular trusses including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. Hot finished welded type tubes
17Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required. In grating, frames, guard bar, railing, brackets, gates and similar works.
18Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement: 4 coarse sand): 25 mm thick.
19Providing and fixing precoatedgalvanized iron profile sheets (size, shape and pitch of corrugation as 5% total coated thickness (TC T), Zinc coating 120gsm as per IS:277 in approved by Engineer-in-charge) 0.05 mm. 240 mpa mm steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
20Providing and fixing precoated galvanised steel sheet roofing accessories 0.50mm + 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : Ridges plain (500 - 600mm).
21Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : Barge board (Upto 300 mm).
2212 mm cement plaster of mix: 1:4 (1 cement : 4 fine sand)
23Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12mm cement plaster.
24Finishing walls with Acrylic Smooth exterior paint of required shade : — New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm).
25Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work
26Supplying and stacking at site. Good earth.
27Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3(1 cement: 3 coarse sand ) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
28Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-incharge.
29Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work):20 mm dia. nominal bore
30Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work): 25 mm dia. nominal bore
31Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work): 40 mm dia. nominal bore
32Providing and fixing brass bib cock of approved quality: 20 mm nominal bore
33Providing and fixing brass stop cock of approved quality : 20 mm nominal bore
34Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 25mm dia. Gun metal gate valve with wheel
35Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 40 mm nominal bore
36Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per sqm
37Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For horizontal surface one coat @1.10 kg per sqm.
38Planting lawn with healthy doob grass (Cynodon dactylon, 'Selection No.1' or local fine variety) roots/runners free from weeds, dibbled at 75 mm c/c in rows 75 mm apart in the bed already prepared and levelled (bed preparation, good earth and manure paid separately), lightly rolled, watered and maintained for 45 days including weeding, filling of gaps/re-dibbling and mowing till a uniform lawn is established, complete as per direction of Engineer-in-charge. Finished lawn area shall be measured.
39Spreading good earth (supplied and paid under SOR item 16.3.9) and vermicompost in lawn areas, planting beds and planting strips, including supply of sieved vermicompost @ 1.5 kg per sqm (free from plastic, stones and weeds), thoroughly mixing with the ploughed soil to 150 mm depth, breaking clods, removing stones/roots/debris, raking and dressing to the designed levels and slopes, all leads and lifts within the site, complete as per direction of Engineer-in-charge. Finished area shall be measured.
40Supply of healthy nursery-grown Foxtail palm (Wodyetia bifurcata) of overall height 2.4 m to 3.0 m (8–10 ft) with minimum 0.9 m clear trunk and 6 healthy fronds, in bag/pot with intact earth ball, free from pests and disease, including carriage to site, digging pit 0.90 x 0.90 x 0.90 m in all kinds of soil, refilling with excavated soil mixed with good earth (good earth paid separately under SOR 16.3.9) and 5 kg vermicompost, planting, staking with three bamboo stakes tied with jute rope, watering and maintenance for 30 days including replacement of failed plant, complete.
41Supply of healthy multi-stem Areca palm (Dypsis lutescens) clump of height 1.5 m to 1.8 m (5–6 ft) with minimum 6 stems, in poly bag with intact earth ball, including carriage, digging pit 0.60 x 0.60 x 0.60 m, refilling with excavated soil, good earth (paid separately) and 3 kg vermicompost, planting, staking, watering and maintenance for 30 days including replacement of failed plant, complete.
42Supply of healthy Chinese fan palm (Livistona chinensis) of height 1.2 m to 1.5 m with minimum 6 fan fronds, in bag with intact earth ball, including carriage, digging pit 0.60 x 0.60 x 0.60 m, refilling with excavated soil, good earth (paid separately) and 3 kg vermicompost, planting, staking, watering and maintenance for 30 days including replacement, complete.
43Supply of healthy Lady palm (Rhapis excelsa) clump of height 0.9 m to 1.2 m with minimum 5 canes, in pot/bag, including carriage, digging pit 0.45 x 0.45 x 0.45 m, refilling with excavated soil, good earth (paid separately) and 2 kg vermicompost, planting, watering and maintenance for 30 days including replacement, complete.
44Supply of healthy bushy flowering shrubs (Ixora coccinea, Hibiscus rosa-sinensis, Duranta erecta, Tecoma stans or Pentas as approved by Engineer-in-charge, colour scheme as directed) of height 0.45 m to 0.60 m in 200 mm poly bags, including carriage, digging pit 0.30 x 0.30 x 0.30 m in the prepared bed, planting at the specified spacing with 0.5 kg vermicompost per plant, watering and maintenance for 30 days including replacement of failed plants, complete.
45Supply of healthy Agave americana (century plant) with rosette spread not less than 0.45 m in pot/bag, including carriage, digging pit 0.45 x 0.45 x 0.45 m in the rockery mound, planting with coarse sand and 1 kg vermicompost, watering and maintenance for 30 days including replacement, complete.
46Supply of healthy ground-cover / succulent plants (Portulaca grandiflora, Sedum, Ophiopogon japonicus (mondo grass) or Tradescantia zebrina as approved) in 100 mm pots, including carriage, planting at 250–350 mm spacing in the prepared bed with 0.2 kg vermicompost per plant, watering and maintenance for 30 days including replacement, complete.
47Supply of healthy bushy Kamini (Murraya paniculata) plants of height 0.75 m to 0.90 m in 200 mm poly bags, including carriage, digging pit 0.30 x 0.30 x 0.30 m in the prepared hedge bed, planting in a straight line at 450 mm c/c with 0.5 kg vermicompost per plant, watering and maintenance for 30 days including replacement, complete.
48Supply of healthy Golden bamboo (Bambusa vulgaris 'Vittata') clump with minimum 3 culms and height 1.5 m to 1.8 m in 300 mm poly bag, including carriage, digging pit 0.60 x 0.60 x 0.60 m, refilling with excavated soil, good earth (paid separately) and 2 kg vermicompost, planting at the specified spacing, staking with one bamboo stake, watering and maintenance for 30 days including replacement, complete.
49Supply of natural hard, sound, rough-faced weathered stone boulders (granite / quartzite / basalt, free from cracks and soft seams) of individual size 300 mm to 600 mm, including loading at quarry, transportation to site, unloading, shifting within site, excavating seating and setting each boulder embedded to 1/3rd of its height in the rockery mound in an aesthetic arrangement as directed, ramming the soil around, all complete.
50Providing and laying decorative washed natural river pebbles (rounded, mixed natural colours, 20 mm to 40 mm size) in 40 mm average thickness over non-woven geotextile weed barrier (120 gsm) laid with 100 mm overlaps, including excavating 40 mm deep bed, levelling and compacting the sub-grade and neatly finishing the edges, complete. Finished area shall be measured.
51Supply, installation and testing of a multi-jet fountain nozzle assembly for the 4.0 m dia basin comprising one adjustable brass centre jet nozzle 25 mm and six adjustable brass spray jets 15 mm on a 25 mm GI ring manifold (about 1.5 m dia) with 25 mm GI riser, ball valve for flow regulation, union and fittings up to the outlet of the submersible pump, manifold supported on GI saddles fixed to the RCC floor with SS-304 anchor fasteners, including 24-hour water test and setting of jet heights. (Submersible pump, underwater lights, cables and control panel are excluded – provided in the E&M estimate.)
52Supply and installation of a natural stone bubbler water feature comprising one natural granite/basalt boulder about 450–600 mm high with a 25 mm drilled through-bore, placed over a 200 litre roto-moulded HDPE sump tank buried flush with ground, covered with a galvanised MS grating (25x5 mm flats @ 50 mm c/c in angle frame) and 75 mm layer of river pebbles, complete with 40 W submersible fountain pump with 3 m cable, 20 mm flexible PVC delivery pipe and fittings, excavation for the sump and refilling, including testing. (Power from the spare outgoing way of the E&M outdoor garden panel.)
53Supply and installation of an outdoor park bench 1.8 m long, 3-seater with back-rest and arm-rests, having cast-iron ornamental side frames (not less than 25 kg per pair) and not less than 7 Nos. seasoned & treated hardwood or WPC slats of minimum 35 x 60 mm section, CI frames finished with anti-rust primer and two coats of enamel/powder coat, fixed to PCC 1:2:4 anchor blocks (paid separately) with 4 Nos. SS-304 anchor bolts M12 x 100 mm, complete.
54Supply and fixing of exterior-grade Wood Plastic Composite (WPC) louvre / slat panels (hollow profile not less than 50 x 25 mm, UV-stabilised, termite and moisture proof, wood-grain finish) fixed horizontally at 25 mm gaps to MS tube framing (framing paid separately under SOR 10.25.2) with SS-304 self-tapping screws, including end caps and cutting, complete. Finished area of screen shall be measured.
55Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm
56Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MOB DB complete with connections, testing and commissioning etc. as required.Single Pole
57Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.25A
58Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required.For 8 way, double door SPN MCBDB
59Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
60Providing and fixing 25 mm X 5 mm GI. strip on surface or in recess for connections etc. as required.
61Supply and fixing LED Panel/Downlight 12W, Warm White Philips/Wipro/Havells, IP44
62Underwater RGB LED Spot 9W IP68, 24V DC, SS body
63Supply and fixingLED Bollard Light 12W, IP65, 0.6-0.8m, powder-coated
64Supply and fixingLED Wall Pack/Post-top 18W, IP65, boundary
65Supply and fixingLED Gate Pillar Light + Flood 20W, IP65
66Supply and fixingLED Driver/SMPS 24V 100W (fountain/strip), IP67, constant voltage
67Submersible Fountain Pump (0.75 HP), with controller, dry-run protection
68Supply and fixing Fountain Control Panel out door (pump + light), IP55, timer, contactor, MCB
69PVC Cu Cable 3C x 2.5 sq.mm (Flat }, IS 1554, underground
70Supply and fixingCu Wire 1.5 sq.mm (FR, in conduit), IS 1554, underground
71Low-voltage cable 2C x 2.5 (24V runs), for LV LED zones
72Supply and laying of Al Armoured cable 4Cx10sqmm , as per required
73Supply and fixing Timer / Astronomical Time Switch, auto dusk-dawn control
74Surge Protection Device (Type 2), for outdoor LED protection
75Supply and fixingContactor 25A + control accessories, for zone switching
76Fixture mounting foundations (bollard/pole), PCC + fixing
77Supply Out door Garden Panel with Bus Bar and provision for MCB,Timer ,Contractor SPD etc, Power coted
78Installation, wiring & termination (labour), skilled electrician team
79Testing, commissioning & IR/earth test, with report
80Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58589323
AUTHORITY Government Departments
TENDER VALUE 11.93 Lakhs
LAST DATE 28-11-2026
Authority
Authority Name Central Mine Planning And Design Institute Limited
Work Description Tender for Development Of Garden In Rajnagar Exploration Camp Of Cmpdi Regional Institute V, Bilaspur
Basic Detail
Tender No CMPDI/RI-V/CVL/26-27 /12/e-2022596 dtd 17.11.2026
Bidding Type Tender
Location
City Bastar
State Chhattisgarh
Key Dates
Publish Date 18 Nov 2026
Submission Date 28 Nov 2026
Open Date 30 Nov 2026
Finance
Tender Value 11.93 Lakhs
Tender Fee Ref. Documents
EMD 15000
Exemption Not Available
Document List
9b6a2613-8d15-49e6-870c-34b17bc42ebf.html
BOQ_382179.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 28, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 9 days
Nov 30, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 11 days

Tender Documents

Download All (ZIP) ↓
html

9b6a2613-8d15-49e6-870c-34b17bc42ebf.html

xls

BOQ_382179.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender