Defence Statutory Bodies & Commissions/Committees Closing in 17 days TDR #58589220

Tender For Special Repairs / Replacement Of Ber Pumping Sets At Water Supply Installation Under Ge Chennai

Issued by Statutory Bodies & Commissions/Committees · Chennai, Tamil Nadu
Tender Value
47.80 Lakhs
Estimated cost
Bid Submission
09 Dec 2026
17 days left
EMD
95600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Special Repairs / Replacement Of Ber Pumping Sets At Water Supply Installation Under Ge Chennai

BOQ

Name of Work:- SPECIAL REPAIRS / REPLACEMENT OF BER PUMPING SETS AT WATER SUPPLY INSTALLATION UNDER GE CHENNAI
Sl. No. Item Description
1Supply, installation, testing and commissioning of 1 HP (0.75 kW) Horizontal End Suction Centrifugal Pump Set complete with 230 V, Single Phase, 50 Hz, TEFC squirrel cage induction motor, IP55 protection, Class 'F' insulation, 2880 RPM, cast iron pump casing, bronze/stainless steel dynamically balanced impeller, stainless steel shaft, mechanical seal, antifriction bearings, suitable for 50–100 LPM discharge against a total head of 24–32 metres with a maximum suction lift of 7 metres, complete with 32 mm (1¼\\") suction inlet and 25 mm (1\\") delivery outlet, common MS base frame, foundation bolts, suction and delivery unions/flanges, non-return valve, isolating valve, pressure gauge, all necessary accessories, wiring from local isolator, earthing, alignment, testing, commissioning and trial run, complete in all respects as specified and directed by the Engineer-in-Charge.
2Supply, installation, testing and commissioning of 3 HP (2.2 kW) Horizontal End Suction Centrifugal Pump Set complete with 415 V, 3 Phase, 50 Hz, TEFC squirrel cage induction motor, IE3 efficiency, IP55 protection, Class 'F' insulation, 2900 RPM, cast iron pump casing, bronze/stainless steel dynamically balanced impeller, stainless steel shaft, mechanical seal, heavy-duty antifriction bearings, suitable for a discharge of 150–300 LPM against a total head of 30–40 metres with a maximum suction lift of 7 metres, complete with 50 mm (2\\") suction inlet and 40 mm (1½\\") delivery outlet, fabricated MS base frame, flexible coupling (where applicable) with coupling guard, foundation bolts, anti-vibration pads, suction and delivery flanges, non-return valve, sluice valve, pressure gauge, vacuum gauge, all necessary nuts, bolts, gaskets, wiring from local isolator, double earthing, alignment, testing, commissioning and trial run, complete in all respects as specified and directed by the Engineer-in-Charge.
3Supply, installation, testing and commissioning of 5 HP (3.7 kW) Horizontal End Suction Centrifugal Pump Set complete with 415 V, 3 Phase, 50 Hz, TEFC squirrel cage induction motor, IE3 efficiency, IP55 protection, Class 'F' insulation, 2900 RPM, cast iron pump casing, dynamically balanced bronze/stainless steel impeller, stainless steel shaft, mechanical seal, heavy-duty anti-friction bearings, fabricated MS common base frame, flexible coupling with coupling guard, foundation bolts, anti-vibration pads, suitable for a discharge of 300–500 LPM against a total head of 30–45 metres with a maximum suction lift of 7 metres, complete with 65 mm (2½\\") suction inlet and 50 mm (2\\") delivery outlet, suction and delivery flanges, non-return valve (NRV), sluice valve, pressure gauge, vacuum gauge, nuts, bolts, gaskets, wiring from local isolator, double earthing, alignment, testing, commissioning and trial run, complete in all respects as specified and directed by the Engineer-in-Charge.
4Supply, installation, testing and commissioning of 7.5 HP (5.5 kW) Horizontal End Suction Centrifugal Pump Set complete with 415 V, 3 Phase, 50 Hz, TEFC squirrel cage induction motor, IE3 efficiency, IP55 protection, Class 'F' insulation, 2900 RPM, cast iron pump casing, dynamically balanced bronze/stainless steel impeller, stainless steel shaft, mechanical seal, heavy-duty anti-friction bearings, fabricated MS common base frame, flexible coupling with coupling guard, foundation bolts, anti-vibration pads, suitable for a discharge of 500–700 LPM against a total head of 30–45 metres with a maximum suction lift of 7 metres, complete with 80 mm (3\\") suction inlet and 65 mm (2½\\") delivery outlet, suction and delivery flanges, non-return valve (NRV), sluice valve, pressure gauge, vacuum gauge, nuts, bolts, gaskets, wiring from local isolator, double earthing, alignment, testing, commissioning and trial run, complete in all respects as specified and directed by the Engineer-in-Charge.
5Supply, installation, testing and commissioning of 10 HP (7.5 kW) Horizontal End Suction Centrifugal Pump Set complete with 415 V, 3 Phase, 50 Hz, TEFC squirrel cage induction motor, IE3 efficiency, IP55 protection, Class 'F' insulation, 2900 RPM, cast iron pump casing, dynamically balanced bronze/stainless steel impeller, stainless steel shaft, mechanical seal, heavy-duty anti-friction bearings, fabricated MS common base frame, flexible coupling with coupling guard, foundation bolts, anti-vibration pads, suitable for a discharge of 700–1000 LPM against a total head of 30–50 metres with a maximum suction lift of 7 metres, complete with 80 mm (3\\") suction inlet and 65 mm (2½\\") delivery outlet, suction and delivery flanges, non-return valve (NRV), sluice valve, pressure gauge, vacuum gauge, nuts, bolts, gaskets, wiring from local isolator, double earthing, alignment, testing, commissioning and trial run, complete in all respects as specified and directed by the Engineer-in-Charge.
6Supply, installation, testing and commissioning of 20 HP (15 kW) Horizontal End Suction Centrifugal Pump Set complete with 415 V, 3 Phase, 50 Hz, TEFC squirrel cage induction motor, IE3 efficiency, IP55 protection, Class 'F' insulation, 2900 RPM, cast iron pump casing, dynamically balanced bronze/stainless steel impeller, stainless steel shaft, mechanical seal, heavy-duty anti-friction bearings, fabricated MS common base frame, flexible coupling with coupling guard, foundation bolts, anti-vibration pads, suitable for a discharge of 1200–1800 LPM against a total head of 35–55 metres with a maximum suction lift of 7 metres, complete with 100 mm (4\\") suction inlet and 80 mm (3\\") delivery outlet, suction and delivery flanges, non-return valve (NRV), sluice valve, pressure gauge, vacuum gauge, nuts, bolts, gaskets, wiring from local isolator, double earthing, alignment, testing, commissioning and trial run, complete in all respects as specified and directed by the Engineer-in-Charge.
7Supply, installation, testing and commissioning of 25 HP (18.5 kW) Horizontal End Suction Centrifugal Pump Set complete with 415 V, 3 Phase, 50 Hz, TEFC squirrel cage induction motor, IE3 efficiency, IP55 protection, Class 'F' insulation, 2900 RPM, cast iron pump casing, dynamically balanced bronze/stainless steel impeller, stainless steel shaft, mechanical seal, heavy-duty anti-friction bearings, fabricated MS common base frame, flexible coupling with coupling guard, foundation bolts, anti-vibration pads, suitable for a discharge of 1500–2200 LPM against a total head of 35–60 metres with a maximum suction lift of 7 metres, complete with 100 mm (4\\") suction inlet and 80 mm (3\\") delivery outlet, suction and delivery flanges, non-return valve (NRV), sluice valve, pressure gauge, vacuum gauge, air release valve, drain plug, nuts, bolts, gaskets, double earthing, wiring from local isolator, alignment, testing, commissioning and trial run, complete in all respects as specified and directed by the Engineer-in-Charge.
8Supply, installation, testing and commissioning of 30 HP (22 kW) Horizontal End Suction Centrifugal Pump Set complete with 415 V, 3 Phase, 50 Hz, TEFC squirrel cage induction motor, IE3 efficiency, IP55 protection, Class 'F' insulation, 2900 RPM, cast iron pump casing, dynamically balanced bronze/stainless steel impeller, stainless steel shaft, mechanical seal, heavy-duty anti-friction bearings, fabricated MS common base frame, flexible coupling with coupling guard, foundation bolts, anti-vibration pads, suitable for a discharge of 1800–2500 LPM against a total head of 35–65 metres with a maximum suction lift of 7 metres, complete with 100 mm (4\\") suction inlet and 80 mm (3\\") delivery outlet, suction and delivery flanges, non-return valve (NRV), sluice valve, pressure gauge, vacuum gauge, air release valve, drain plug, nuts, bolts, gaskets, double earthing, wiring from local isolator, alignment, testing, commissioning and trial run, complete in all respects as specified and directed by the Engineer-in-Charge.
9Supply, installation, testing and commissioning of 12.5 HP (9.3 kW) Horizontal Non-Clog Centrifugal Pump Set complete with 415 V, 3 Phase, 50 Hz, TEFC squirrel cage induction motor, IE3 efficiency, IP55 protection, Class 'F' insulation, 2900 RPM, cast iron non-clog volute casing, single-channel/semi-open dynamically balanced impeller suitable for handling sewage and solids, stainless steel shaft, mechanical seal with silicon carbide/carbon faces, heavy-duty anti-friction bearings, fabricated MS common base frame, flexible coupling with coupling guard, foundation bolts, anti-vibration pads, suitable for a discharge of 800–1200 LPM against a total head of 20–35 metres with a maximum suction lift of 7 metres, complete with 100 mm (4\\") suction inlet and 80 mm (3\\") delivery outlet, suction and delivery flanges, non-return valve (NRV), sluice/butterfly valve, pressure gauge, vacuum gauge, nuts, bolts, gaskets, double earthing, alignment, testing, commissioning and trial run, complete in all respects as specified and directed by the Engineer-in-Charge.
10Supply, installation, testing and commissioning of 10 HP (7.5 kW) Borewell Submersible Pump Set comprising multistage stainless steel centrifugal pump directly coupled with 10 HP, 415 V, 3 Phase, 50 Hz, water-filled/oil-filled rewindable submersible motor, suitable for continuous duty, complete with stainless steel impellers, stainless steel shaft, built-in non-return valve, suitable for a discharge of 300–600 LPM against a total head of 60–120 metres, suitable for installation in a 150 mm (6\\") borewell, complete with 100 mm (4\\") suction (pump inlet) and 65 mm (2½\\") delivery outlet, HDPE/GI delivery pipe, submersible flat cable, cable jointing kit, SS safety wire/chain, well cap, DOL/Star-Delta starter with dry-run, overload and single-phasing protection, double earthing, testing, commissioning and trial run, complete in all respects as specified and directed by the Engineer-in-Charge.
11Supply, installation, testing and commissioning of 3 HP (2.2 kW) Borewell Submersible Pump Set comprising multistage stainless steel centrifugal pump directly coupled with 3 HP, 415 V, 3 Phase, 50 Hz, water-filled/oil-filled rewindable submersible motor, suitable for continuous duty, complete with stainless steel impellers, stainless steel shaft, built-in non-return valve, suitable for a discharge of 100–250 LPM against a total head of 40–80 metres, suitable for installation in a 150 mm (6\\") borewell, complete with 80 mm (3\\") pump inlet and 40 mm (1½\\") delivery outlet, HDPE/GI delivery pipe, submersible flat cable, cable jointing kit, SS safety wire/chain, well cap, DOL starter with dry-run, overload and single-phasing protection, double earthing, testing, commissioning and trial run, complete in all respects as specified and directed by the Engineer-in-Charge.
12Supply, installation, testing and commissioning of 1 HP (0.75 kW) Borewell Submersible Pump Set comprising multistage centrifugal pump directly coupled with 1 HP, 230 V, Single Phase, 50 Hz, water-filled/oil-filled rewindable submersible motor, IP68 protection, Class 'F' insulation, suitable for continuous duty, complete with stainless steel pump casing, stainless steel shaft, stainless steel/Noryl impellers, built-in non-return valve, suitable for a discharge of 40–80 LPM against a total head of 30–60 metres, suitable for installation in a 150 mm (6\\") borewell, complete with 32 mm (1¼\\") delivery outlet, submersible flat cable, HDPE/GI delivery pipe, cable jointing kit, stainless steel safety wire/chain, well cap, DOL starter/control panel with dry-run, overload and single-phasing protection, double earthing, testing, commissioning and trial run, complete in all respects as specified and directed by the Engineer-in-Charge.
13Supply, installation, testing and commissioning of 3 HP (2.2 kW) Vertical Multistage Pressure Booster Pump Set complete with 415 V, 3 Phase, 50 Hz, TEFC squirrel cage induction motor, IE3 efficiency, IP55 protection, Class 'F' insulation, 2900 RPM, stainless steel pump casing and impellers, stainless steel shaft, mechanical seal, heavy-duty anti-friction bearings, suitable for a discharge of 100–220 LPM against a total head of 40–60 metres, complete with 50 mm (2\\") suction inlet and 40 mm (1½\\") delivery outlet, pressure tank (minimum 24 litres), pressure switch, pressure gauge, non-return valve (NRV), isolation valves, anti-vibration pads, foundation bolts, complete electrical connections, double earthing, testing, commissioning and trial run, complete in all respects as specified and directed by the Engineer-in-Charge.
14M&L for DOL starter 3 phase 440 volts 50 HZ with over load relay range 2-5, contactors size 12 complete with all connections for capacity 2 HP complete all as directed.
15M&L for DOL starter 3 phase 440 volts 50 HZ with over load relay range 6-9, contactors size 12 complete with all connections for capacity 5 HP complete all as directed.
16M&L for DOL starter 3 phase 440 volts 50 HZ with over load relay range 12-18, contactors size 18 complete with all connections for capacity 7.5 HP complete all as directed.
17M&L for fully automatic star delta starter 3 phase 440 volts 50 HZ with over load relay range 8-12, contactors size 18 complete with all connections for capacity 10 HP complete all as directed.
18M&L for fully automatic star delta starter 3 phase 440 volts 50 HZ with over load relay range 8-12, contactors size 18 complete with all connections for capacity 12.5 HP complete all as directed.
19M&L for fully automatic star delta starter 3 phase 440 volts 50 HZ with over load relay range 12-18, contactors size 25 complete with all connections for capacity 15 HP, cat part No IHPASDWE complete all as directed.
20M&L for fully automatic star delta starter 3 phase 440 volts 50 HZ with over load relay range 17-25, contactors size 32 complete with all connections for capacity 25 HP, cat part No IHPASDWE complete all as directed.
21M&L for fully automatic star delta starter 3 phase 440 volts 50 HZ with over load relay range 22-32, contactors size 32 complete with all connections for capacity 30 HP, cat part No IHPASDWE complete all as directed.
22M&L for fully automatic star delta starter 3 phase 440 volts 50 HZ with over load relay range 28-42, contactors size 32 complete with all connections for capacity 35 HP, cat part No IHPASDWE complete all as directed.
23Supply and fixing PVC insulated multi stranded single core cable with copper conductor 1100 Volts grade conforming to IS: 694 / 1990 for the following sizes:-
246 Sqmm
2510 Sqmm
2616 Sqmm
2725 Sqmm
2835 Sqmm
2950 Sq mm
30Earthing complete with copper earth plate electrode of size 60cm x 60cm x 3.15 mm thick buried directly in ground (earth pit not less than 2.25 m deep below the normal grounded level) with top edge of the plate not less than 1.5m below normal GL connected to galvanised iron strip 25×4mm by means of bolts, nuts, check nuts washers of copper all as shown in electrical plate No-5 of SSR Part I connected to machinery/equipments installed power house/sub station all as specified including testing on completion.Note (i) the unit rate shall also include for excavation and earth work in any type of soil PCC (1:3:6) type C1 pit RCC 1:2:4 type B-1 cover reinforced with 8 mm dia CTD bars @ 150mm C/C both ways funnel with 15mm bore GI watering pipe 20mm dia bore GI protection pipe wire mesh and copper lugs complete in addition to item No 1(a) to (e) of preamble ( Notes) Under sub heading earthing specified on SI page NO-451 of SSR Part-II 2020.(ii) Marking the earth chamber with date of test, name of machine and earth value. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58589220
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 47.80 Lakhs
LAST DATE 09-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repairs / Replacement Of Ber Pumping Sets At Water Supply Installation Under Ge Chennai
Basic Detail
Tender No 8107/E8
Bidding Type Tender
Location
City Chennai
State Tamil Nadu
Key Dates
Publish Date 18 Nov 2026
Submission Date 09 Dec 2026
Open Date 11 Dec 2026
Finance
Tender Value 47.80 Lakhs
Tender Fee 500
EMD 95600
Exemption Available
Document List
BOQ_896850.xls
cc668d50-7f16-4145-8725-6653ac1d6853.html
Tender8107.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 09, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 17 days
Dec 11, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 19 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_896850.xls

html

cc668d50-7f16-4145-8725-6653ac1d6853.html

pdf

Tender8107.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender