Defence Statutory Bodies & Commissions/Committees Closing in 10 days TDR #58589205

Tender For Provn Of Laboratory Building (6.30 X 20 M Size) With 02 Nos Toilet At Ge Ctl Kolkata

Issued by Statutory Bodies & Commissions/Committees · Kolkata, West Bengal
Tender Value
36.91 Lakhs
Estimated cost
Bid Submission
02 Dec 2026
10 days left
EMD
73820
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Provn Of Laboratory Building (6.30 X 20 M Size) With 02 Nos Toilet At Ge Ctl Kolkata

BOQ

Name of Work:- PROVN OF LABORATORY BUILDING (6.30 X 20 M SIZE) WITH 02 NOS TOILET AT GE CTL KOLKATA
Sl. No. Item Description
1Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE ( C ) KOLKATA Name of Work: PROVN OF LABORATORY BUILDING (6.30 X 20 M SIZE) WITH 02 NOS TOILET AT GE CTL KOLKATA Contract No: GE (C )/KOL/ OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # ItemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words
2Excavation in trenches not exc. 1.5 Metre wide and not exc. 1.50 Metre in depth for foundation etc. or for shafts, wells, cess pits, manholes, pier holes etc. not exc. 10 Sqm on plan and not exc. 1.50 Metre in depth and getting out as in Soft/Loose Soil, complete all as specified and as directed.
3M&L for Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
4M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.
5M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square meter of surface complete all as specified and directed.
6M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed
7M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed
8Use and waste for formwork to Sides of Concrete Founda-tions, Footings, bases of Columns, Raft and Raft Beams, Sides and Soffits (if any) of foundation and plinth beams and similar work; Square, rectangular or polygonal, vertical or to batter, flat, rough finished surfaces of concrete, complete all as specified and as directed.
9Use and waste for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and directed
10Use and waste of formwork for rough finished surfaces to sides of soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc also splays between floors and beams etc for rough finished surfaces complete all as specified and directed
11M&L for TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
12Same as item No. 10 here in before but 6mm to 10mm dia bars as in stirrups, spacers and binders
13M&L for RCC M-25 design mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed
14M&L for RCC M-25 design mix as in columns, pillars, piers, posts and struts complete all as specified and directed
15M&L for RCC M-25 design mix as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed
16M&L fly ash bricks pulverizes using class designtion 75 (kgf/cm2) bricks straigth or curved on plan exc 6m mean radius built in CM (1:6) cmplete all as specified and directed.
17M&L Brick Work using class designtion 75 (kgf/cm2) bricks Half-Brick thick, Old Size, built in Cement Mortar 1:4, Straight or Curved on Plan to any Radius, complete all as specified and as directed.
18Material and labour Rendering 15 mm thick on brick or concrete surface in CM 1:4 and surface finished using extra cement slurry as neeru finish on brick, concrete surfaces upto any height necessary scaffolding and safety measure complete all as directed by Engr-in-Charge.Note : WPC shall be paid seprately at supply only rate.
19M&L rendering 15mm thick in CM (1:6) on other than fair faces of brick work or concrete surfaces even & smooth without using extra cement complete all as specified and directed
20Supply only liquid water proffing compound as required
21M&L Hardcore (broken stone or boulders) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
22S&F Pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and directed
23S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, fixed with self tapping screw complete all as specified and directed
24M&L Rolled Mild Steel Work in Tubular /hollow section as trusses, purlin , rafter etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-4923 grade YSt.-240 complete all as specified and as directed.
25S&F Mild Steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe-290 Gde-E165) complete all as specified and directed.
26\\"M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut of 11 to 15mm dia, and 22.50cm to 30cm long complete all as specified and directed.\\"
27\\"S&F 4mm thick suspended false ceiling HPSC (high pressure steam curved) pre-primered fibre cement non asbestous building board similar to E-Board Classic placed in a grid of size 605x605mm with aluminium powder coated angle/channel/tee section duly suspended with 4mm dia GI hanger fixed with GI hooks 4mm dia and fastner as required at the site including two coat of oil bound distemper complete all as specified and directed. Note:-The bidder quoted rate shall include for all straight, Raking or circular cutting, wastage on ceiling board \\"
28M&L 75mm thick PCC (1:4:8) type D-2 (Using 40mm graded stone aggregate) as in sub base of flooring complete all as specified.
29\\"M&L 25mm thick providing cement concrete (1:2:4) type B-1 (Using 20mm graded stone aggregate) as in floor finishing even and fair surface to receive topping layers complete all as specified and directed.\\"
30S&F Machine cut kota stone slab flooring 20-25mm thick (size 550mmx550mm) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite finish polishing complete over 20mm thick 1:6 cement mortar screed bed complete all as specified and as directed.
31All as per srl No 29.00 here-in-after but in a vertical/ skirting surface etc over and including 10mm thick rough cement plaster to receive tile in CM 1:4
32M&L glazed ceramic coloured tiles 450x300x6-7mm in vertical surfaces set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed
33M&L joint free non skid ceramic coloured tiles 8-10mm thick (square/rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm in floor set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed
34\\"Material & labour of 1.50mm thick power coated aluminium , three track sliding window with three nos shutters made of aluminium section as per drawing no CWE/KOL/TD-33 of section no 1F-1F including necessary jointing cleats, glazing clips, rubber neoprene packing, roller, locking arrangement, anodised aluminium snap beading screws etc. inluding glazing with 4.8 mm thick tinted glass to aluminium frame work using rubber gasket where the section of frame and shutter and Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. glazing clip, fastener etc Complete all as specified and as directed.Note :- (i) All window member including fitting & fixture i.e frame, track, shutter frame, etc shall be deem to included quoted rate. Only measure opening size of window.\\"
35\\"S&F powder coated aluminium ventilators with louvers and glazing including frame of section over all size of window 600X450mm complete with following specification. (a) Alu frames of size 45x45x1.2mm (b) Rail & Stile 45x45x1.2mm thick (c) 4.80mm thick frosted sheet glassNote :- All ventilators/louvers member including fitting & fixture shall be deem to included quoted rate. Only measure opening size of ventilators/louvers\\"
36Supply and fixing of tinted glass 4.8mm thick, pin head type and glazing in aquares exc 0.5 sqm in each pane complete all as specified and as directed.
37S & F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including if required fixing with wooden beads or MS flat of size 15mmx3mm & chromium plates screws/using metal nut and bolts or wooden beading etc complete all as specified and directed
38S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portion) with extruded built up standard tubular section /appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed of Engineer-in-charge
39S&F of 5mm thick ACP (Aluminium Composite Panel) exc 0.5 sq. M in each pane complete all as specified and directed
40\\"S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing powder coated aluminium handle, tower bolt, door stopper as required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed of Engineer-in-charge
41S&F Safety lever locks mild steel with 4 levers for rolling shutters as complete all as specified and as directed.
42S&F Double action floor spring hydraulically regulated, made up of minimum 1.25mm thick aluminiun alloy sheet foundation box, main body with stainless steel cover ,governing piovet made of brass ,other parts made of mild steel heavy duty and fixed complete all as specified and as directed.
43S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.
44S&F for Factory Made Solid PVC Moulded Door Shutter With Wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site complete all as specified and directed.
45S&F Collapsible steel gates, top hung consisting of channel pickets pivotedflat bars, top and bottom runners, brasshandles etc., as specified, erected inposition and securing runners withholdfasts and brackets, complete all as specified and directed.
46S&F CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings fixed on Walls, Ceiling or laid in Floors or any other Situation, etc up to four stories height of bldgs. complete as all specified and as directed.
47S&F CPVC pipes 25 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings fixed on Walls, Ceiling or laid in Floors or any other Situation, etc up to four stories height of bldgs. complete as all specified and as directed.
48Cutting chase, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of laddings, steps, cills, sushades, shelves, lintels etc and cutting chase for concealed water tubing or concealed coduit wiring etc and making good cutting grith n exc 10 cm girth on brick walls complete all as specified and directed.
49\\"S & F for brass chromium plated two in one tap with Wall Flange screwed for 15 mm bore pipe complete all as specified and directed\\"
50\\"S & F for brass chromium plated Pillar Tap fancy tyep screwed for 15 mm bore pipe complete all as specified and directed\\"
51\\"S & F for 15mm bore brass chromium plated Angular Valve with Wall Flange complete all as specified and directed.\\"
52\\"S & F chromium plated Health faucet with 8mm Dia, 1.2 Meter long flexible tube and wall hook with N.R.V (Back Flow Preventer) \\" complete all as specified and as directed.
53Supply and fixing Vitreous China wash down water closet pan including P or S trap (pedestal pattern), white (excluding flushing cistern and flush pipe) including plastic water closet seat, white colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device and wash down water closet complete all as specified and as directed.
54\\"S&F PVC flusing cistern low level 10 Ltr capacity of approved make including fixing of brackets connection to WC and making good disturbed area complete all as specified and as directed.\\"
55S&F PVC connection 15mm size with PTMT nut of length 450mm complete all as specified and directed
56S&F triple layer PVC water storage tank cylinderical, verticle with closed top hoisted and fixed in position tank capacity 1000 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 25mm outer diameter for CPVC pipe & making connection for inlet and outlet complete all as specified & directed.
57S&F vitreous china wash hand basin white of size 550 x 400mm excluding taps but including 32mm PTMT waste coupling (including 32mm waste pipe) complete all as specified and directed.
58S&F Mirror Bevelled Edge 600x450mm, Selected quality Glass, mounted on 6.0mm thick AC Building Board or Commercial Ply-wood and fixed to Wooden Plugs with Chro-mium Plated Brass Screws and Cup Washers , complete all as specified and as directed.
59M&L for PCC 1:3:6 type C-1 using 20mm graded stone agg as in bed blocks/hold fast complete all as specified and directed
60S&F Aluminium anodised, barrel tower bolts of extruded section 200mm long complete all as specified and directed
61S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy of 300mm long complete all as specified and directed
62S&F Extruded aluminium alloy handles, fabricated type, anodised 150mm long complete all as specified and directed
63S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, 150mm long complete all as specified and directed
64\\"M&L 75mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection laid in panels, finish the top surfaces even and smooth without using extra cement complete all as specified and directedNote:- Construction joints will be provided at interval of 2.5m length and filled with bitumen 80/20 mix with sand in ratio of 1:3 and cost of the same shall be deemed included in quoted rate \\"
65S&F of sink made of Stainless Steel l.0mm thick Overall size 495mm x 420mm and Bowl size 410 mm x 330 mm x 160 mm for Kitchen with Plugs, Washers, including bedding in cement motor or fixing cantilever bracket and connecting union to pipe,complete all as specified and as directed.
66S&F brass chromium plated Towel Ring fixed with screw complete all as specified and as directed.
67S&F UPVC (SWR) 110mm bore Branch pieces (Single Y), (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches or fitted with oval access doors as complete all as specified and directed.
68S&F for UPVC (SWR) 110mm bore bend any radius complete all as specified and directed
69S&F for single socketed UPVC (SWR) pipe Type \\"B\\" 110mm bore with rubber ring joint any radius complete all as specified and directed
70M&L for diameter of outlet 75mm UPVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.
71M&L preparing newly plastered surface and applying two coats of oil bound distemper (any colour/tint) over a coat of primer including a coats (approx 1.5mm thick) of white cement based putty complete all as directed and specified.
72M&L preparing newly plastered surfaces and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) upto 4 storey complete all as specified & directed.
73M&L for preparation of new surfaces of Steel and Steel based materials of any descriptions not otherwise described over 10Cm width or girth & applying two coat of synthetic enamel paint over a coat of red oxide on steel surfaces complete all as specified.
74M&L for 25mm thick prepolished coloured PCC chequered tiles of size 400x400x 25mm set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles with and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.
75Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 Cm as in soft/loose soil complete all as specified and directed.
76Removing excavated material ( soils of any type) not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.
77Shifting of following lab Equipments from old lab building to new lab building including installation complete:(i) Oven/Furnace (ii) Sieve Shaker (iii) Core drilling machine, (iv) Flexural testing machine (v) CTM -02 Nos (vi) Sieve set (vii) Hot air oven (viii) Mortar mixing machine (ix) Vibration testing equipment (x) Heavy cube mould/cylinder (xi) Keatings oven / Muffle (xii) Concrete mixer (xiii) Durability testing equipment (xiv) Buoyancy balance (xv) Impact testing machine (xvi) Environmental test chamber (xvii) Electronic balance (xviii) Cube casting machine (xix) Compactor/proctor tester (xx) Slump cone (xxi) Curing room vibratory platform (xxii) Curing tank (xxiii) Sample splitter with channel (xxiv) Thin film oven (xxv) Muffle furnace
78M&L for point wiring for one light/ bell/ fan controlled by one number one way switch complete with 1100V grade FRLSH PVC insulated unsheathed multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two runs single core for phase and neutral drawn through in and including PVC concealed conduit of suitable size (minimum 20mm dia medium grade ISI Marked) complete with one run of 1100V grade FRLSH PVC insulated multistranded copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly incl modular pressed GI sunken box concealed on wall including fixing of modular cover plate with frame of suitable modules with screws, for housing of modular switches / socket/ Fan regulator etc. complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing surrounding surface complete all as specified and directed.Note : The cost of cutting chasing of wall/ceiling extra and making good of disturbed surface with finish shall be deemed to be included in quoted rate.
79All as per item No. 77.00 here-in-before but one 3 pin 5 amp switch socket out let independent .
80All as per item No. 77.00 here in-before but for one 3 pin 5 amps socket outlet on the same board with other switch with PVC conduit complete 1.5 sqmm multistraded all as specified and directed.
81All as per item No. 78.00 here-in-before but using 2.5 Sqmm size stranded copper conductor cable for one 3 pin 16 Amp socket outlet point on independent board complete all as specified and directed.
82All as per item No. 77.00 here-in-before but using 4 Sqmm size stranded copper conductor cable for one 3 pin 16 Amp socket outlet point on independent board complete all as specified and directed.
83S&F modular switch ,one way, 6 Amp , 1 module complete all as specified and as directed.
84S&F modular socket out let 2 module, 3 pin 5 Amps complete all as specified and directed
85S&F modular socket out let 2 module, 3 pin 15 Amps complete all as specified and directed
86S & F Modular switch 1 way 16A,1 module complete all as specified and directed.
87Supply and fix Modular Bell push switch 6A 1 module complete all as specified and as directed.
88S & F call bell, ding dong AC 230 volts, single pole complete all as specified and as directed.
89S&F modular ceiling rose, surface bakelite, 65 x 50 mm,three terminals complete all as specified and directed.
90S&F modular ceiling fan regulator electronic Step type, solid state, 2M , 240 volts, complete all as specified and as directed.
91Supply and fixing LED batten lights fitting 1x 10W, 220V,AC wall mounted/suspended type LED batten with aluminium extruded polycarbonate housing & integrated electronic driver with efficacy of 110lumen/W connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.all as specifeid and directed
92Supply and fixing LED lights batten fitting 1x 20W, 220V,AC wall mounted/suspended type LED batten with aluminium extruded polycarbonate housing & integrated electronic driver with efficacy of 110lumen/W connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.all as specifeid and directed
93Supply and fixing LED luminaire 2ftx2ft 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roofceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
94Supply and fixing LED building security light fittings 35 watts 220V AC made up with pressure die cast housing, IP 66 protection with integrated electronic driver & efficacy of 110lumen/W, surge protection including bent of GI pipe light grade with suitable dia alongwith fixing arrangment complete all as specified and as directed.
95Supply and fix A C starter unit consisting of one 25 Amp capacity starter, one 240 V 25 Amps 10 KA SPN MCB, one 25 Amps socket and one 25 Amps plug top prewired with 6M modular box withcover plate and frame all as specified and directed.
96S & F triple pole and earth enclosure with a three pin and earth plug and socket complete with one triple pole MCB 415V 20A including making good to the disturbed surfaces of the wall as per existing finish complete all as directed and instructed.
97Supply and fixing sub main wiring with four run of single core 4 Sqmm PVC insulated unsheathed stranded cable copper conductor drawn through PVC conduits Concealed in walls, ceiling etc with all fittings and accessories of PVC conduits (like Tee, bend etc.) complete fixed to walls/ceiling etc than 25 mm dia with all fittings including 4 sq mm PVC insulated unsheathed single core copper conductor as earth wire and including PVC conduit all as specified and as directed.Note : (i) 5 run of single core cable 4 sq mm and one run of pvc conduit will be measured as one length. (ii) The cost of cutting chasing wall/ceiling extra and making good for disturbed surface with finish shall be deemed to be included in quoted rate.
98Supply and fixing sub main wiring with two run of single core 6 Sqmm PVC insulated unsheathed stranded cable copper conductor FRLSH drawn through PVC conduits Concealed in walls, ceiling etc with all fittings and accessories of PVC conduits (like Tee, bend etc.) complete fixed to walls/ceiling etc than 25 mm dia with all fittings including 6 sq mm PVC insulated unsheathed single core copper conductor as earth wire and including PVC conduit all as specified and as directed.Note : (i) Two run of single core cable 6 sq mm and one run earth wire 6 sq mm will be measured as one length.(ii) The cost of cutting chasing wall/ceiling extra and making good for disturbed surface with finish shall be deemed to be included in quoted rate.
99S&F in replacement factory made powder coated distribution board SPN, 8w ays, IS 8623, IEC 61439-3, double door, protection class IP-43, fabricated from CRCA sheet and fixed / flushed on wall suitable for universal mounting including 100 Amps bus bar, neutral bus bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable glands plates with knockouts required at site alongwith blanks including cutting of wall if required and making good disturbed surface in CM (1:3) and finishing the surface to match with existing surface etc complete all as specified and directed.Note :- (i) MCBs shall be measured and paid seperately and make of MCB will be same as per DB.(ii) Cost of Lugs/ thimbles shall be deemed to be included in the quoted rates.
100S&F in replacement factory made powder coated distribution board SPN, 4 ways, IS 8623, IEC 61439-3, double door, protection class IP-43, fabricated from CRCA sheet and fixed / flushed on wall suitable for universal mounting including 100 Amps bus bar, neutral bus bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable glands plates with knockouts required at site alongwith blanks including cutting of wall if required and making good disturbed surface in CM (1:3) and finishing the surface to match with existing surface etc complete all as specified and directed.Note :- (i) MCBs shall be measured and paid seperately and make of MCB will be same as per DB.(ii) Cost of Lugs/ thimbles shall be deemed to be included in the quoted rates.
101Supply and fixing MCB TPN DB made up with sheet metal double door, phosphorised, power coated, neutral link, earth bar and din rail, 8 way TPN with 200 amps rated bus bar, 415 volts complete all as specified and as directed.
102Supply and fixing MCB 63 Amps, FP 415 Volts ,C- Curve breaking capacity 10 KA all as directed .
103Supply and fixing MCB 6 to 32 Amps, SP, 240 Volts ,C- Curve breaking capacity 10 KA as directed .
104Supply and fixing MCB 32 Amps, DP 240 Volts ,C- Curve breaking capacity 10 KA as directed .
105Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm including making good to disturbed wall surface as per existing finish complete all as specified and directed.
106Supplying and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) without remote complete with all the connection as directed.
107Materials and labour for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.00 mm thick burried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI wire 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, GI strip proected by 40 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 cm c/c bothways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I complete all as specified and as directed.
108Supply and laying double wall corrugated pipe (dwc) conformingto IS 19430 part -I of size 100mm outer dia compolete all as specified and directed
109Materials and Labour for cutting /boreing of existing road / path / hardstanding etc for laying of the cable and making good the disturbed road top surfaces with PCC of min thickness 40mm complete all as specified and directed.
110Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 35 Sqmm 3.5 core in trench/duct/floor/wall with provision of saddle and lugs, joints etc including connection and taking down of old unsv ones complete .
111Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 1.5TR AC with outdoor unit stand, complete all as specified.\\"
112Supply and fix Voltage stabilizer for AC of capacity 4 KVA , automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy, digital display wall mounted complete all as directed.
113Supply and fix chemical dehumidifier continuous operating complete, with heaters, ducting, electrical connection for 60 capacity
114Supply and laying GI pipe medium grade ISI marked of 40mm bore with all fittings (union, elbow, socket) laid in trenches complete all as specified and directed..
115Supply and laying GI pipe medium grade ISI marked of 25 mm bore with all fittings (union, elbow, socket) laid in trenches complete all as specified and directed..
116Supply & fixing gun metal 40 mm bore gate valve (ISI marked) screwed down high pressure with handle with iron wheel both ends screwd for iron pipe complete all as specified and directed
117Supply & fixing gun metal 25 mm bore gate valve (ISI marked) screwed down high pressure with handle with iron wheel both ends screwd for iron pipe complete all as specified and directed
118M&L Granite (black) Work (Table rubbed and polished) 18-20 mm thick, Platforms and like, Set in Screed bed of 20mm thick in Cement Mortar 1:6 including Pointing in White Cement 1:2 using Pigment to match with Shade of Granite including Cutting and Polishing including half round edges, complete all as specified and as directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58589205
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 36.91 Lakhs
LAST DATE 02-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provn Of Laboratory Building (6.30 X 20 M Size) With 02 Nos Toilet At Ge Ctl Kolkata
Basic Detail
Tender No 8102/E8
Bidding Type Tender
Location
City Kolkata
State West Bengal
Key Dates
Publish Date 18 Nov 2026
Submission Date 02 Dec 2026
Open Date 03 Dec 2026
Finance
Tender Value 36.91 Lakhs
Tender Fee 500
EMD 73820
Exemption Available
Document List
79d1e2e6-f5ad-44cd-ae03-edcd22d2db87.html
BOQ_896845.xls
Retender8102.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 02, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Dec 03, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 11 days

Tender Documents

Download All (ZIP) ↓
html

79d1e2e6-f5ad-44cd-ae03-edcd22d2db87.html

xls

BOQ_896845.xls

pdf

Retender8102.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender