Road Transport and Highways Government Departments Closing in 29 days TDR #58589155

Tender For Improvements To Desur Nandihalli Kukdolli Road In Belagavi Taluka(Job No:Crif-Knt-2026-27-363)

Issued by Government Departments · Belagavi, Karnataka
Tender Value
6.53 Crore
Estimated cost
Bid Submission
18 Dec 2026
29 days left
EMD
9.79 Lakhs
Bank guarantee accepted
Document Fee
8850
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Belagavi → Karnataka
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Improvements To Desur Nandihalli Kukdolli Road In Belagavi Taluka(Job No:Crif-Knt-2026-27-363)

BOQ

Name of Work:- Improvements to Desur Nandihalli Kukdolli Road in Belagavi Taluka(JOB NO:CRIF-KNT-2026-27-363)
Sl. No. Item Description
1Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shurbs, sapling and trees girth up to 300mm,removal of sumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned,up to a lead of 1000 meters including removal and disposal of top organic soil not exceeding 150mm in thickness all labour, hire charges of all machineries., complete. (ii) By mechanical means (A) In area of light jungle. As per the directions of Engineer in Charge.
2Construction of unlined surface drains of average cross sectional area 0.40 sqm in soil to specified lines, grades, levels and dimension to the requirement of clause 301 and 309. Excavated materail to be used in embackment within a laod of 1000 meters including all labours, load, unload, usage charges of all machinery etc., complete. Ref. to MoRT&H Specification 309 As per the directions of Engineer in Charge.
3Scarifying the existing bituminous surface to a depth of 50mm and disposal of scarified material within all lifts and lead upto 1000 meters including all labour, load, unload, usage charges of all machinary etc complete. (i) By Mechinery Means using Hydraulic excavator as per direction of Engineer In charge.
4Construction of granular sub-base by providing spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401, including protection of edges of GSB layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading all lead, lifts etc., complete. (Compacted thickness) as per direction of Engineer In charge.
5Providing, laying, spreading and compacting graded stone aggregate as per table 400-12 & 400-13, to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density of 98% including protection of edges of WMM layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading all lead, lifts etc., complete, with lead of mixed material up to 1 Km (Compacted thickness).Laying Using Grader as perdirection of Engineer Incharge.
6Providing and applying primer coat with SS1 bitumen emulsion complying IS-8887 on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.as per table-500-3, including cost of all materials, labour, usage charges of all machinery, loading & unloading etc., complete, including lead for emulsion as perdirection of Engineer In charge.
7Providing and applying tack coat with VG 10 grade bitumen using bitumen pressure distributor at the rate of 0.25 kg per sqm on the prepared granular surface cleaned with mechanical broom & dusting by air compressor and spraying including cost of all materials, labour, usage charges of all machinery, loading & unloading etc., complete, including lead for bitumen. As per the directions of Engineer in Charge.
8Providing and applying tack coat with VG-10 grade bitumen using emulsion pressure distributor at the rate of 0.20 kg ¸sqm on the prepared bituminous surface cleaned with mechanical broom and dusting by air compressor and spraying including cost of all materials, labour, usage charges of all machinery, lead, lift, loadig and unloading etc.,complete, including lead for emulsion.Ref. to MoRT&H Specification 503. As per the directions of Engineer in Charge.
9Providing and laying dence graded bituminous macadam with higher capacity batch type HMP using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG -30 Grade paving bitumen as per clause 500.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder at 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth whelled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respect including cost of all materials all labour, usage charges of all machinery, all lead, lifts, loading, unloading stacking transporting etc., complete, including lead for bitumen, with a lea of mixed material , excluding cost of primer/ tack coat 50-75 mm compacted thickness. As per the directions of Engineer in Charge.
10Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder at 5.4 per cent of mix and filler at 2% by weight of agregate, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects including cost of all materials all labour, usage charges of all machinery all lead, lifts, loading, unloading stacking transporting etc., complete, including lead for bitumen, with a lead of mixed material , excluding cost of primer/ tack coat- 30-40 mm compacted thickness. Grading -II As per the directions of Engineer in Charge.
11Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 laid in layers not exceeding 250 mm thick and compacting it by mechanical means after adding water to its OMC, so as to achieve 97% compaction of maximum dry density and finish the surface to the required camber, grade and cross section etc., speading, grading by motor grador, consolidation by roller including all lead, lifts, loading, unloading, all labour, usage charges of machinery etc., complete. (New road formation)As per the directions of Engineer in Charge.
12Road marking with Hot applied Thermoplastic compound with Reflectorising glass beads on bituminous surface providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectiorising glass beads at 250gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes,including, barricading , traffic diversion as per IRC- 3, cleaning the surface of dirt, dust and other foriegnmatter, demarcation at site, traffuc control, cost of all materials all labour lead, lifts, loading, unloading transporting etc., complete.Ref. to MoRT&H Specification 803 As per the directions of Engineer in Charge.
13Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer.As per the directions of Engineer in Charge.
14Providing and fixing of retro-reflectarised cautionary ,mandatoryand informatory sign as per IRC:67 made of class B Type IV retro reflective sheeting fixed over 2mm thick Aluminium sheeting vide clause 801.3, 4mm thick aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25x25x3mm angle mounted on a mild steel circular pipe 65NB 3.60mtrs high (min effective height 1.30 mtrs) ,3.2mm thickness firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67,as per clauses including curing cost of all materials all labour, lead, lifts,loading, unloading transporting etc., complete.As per the directions of Engineer in Charge.(1) A-(iv) 60cm equilateral Triangle
15Providing and fixing of retro-reflectarised cautionary ,mandatoryand informatory sign as per IRC:67 made of class B Type IV retro reflective sheeting fixed over 2mm thick Aluminium sheeting vide clause 801.3, 4mm thick aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25x25x3mm angle mounted on a mild steel circular pipe 65NB 3.60mtrs high (min effective height 1.30 mtrs) ,3.2mm thickness firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67,as per clauses including curing cost of all materials all labour, lead, lifts,loading, unloading transporting etc., complete. 60cm Circular
16Providing and erecting Project Disply board of size 1.80 vertical x 1.6 M Horizontal made of Cold Rolled Coil Sheet 16 Guage (1.6 mm thickness) sheering sthrenghtened by welding to MS angle of size 35x 35x5 mm iron framework on all sides, extra cross vertical angle fixed using nuts and bolts, base of the board shall be cleaned, applying red oxide and black paint by sprayer on both side of the board and all MS iron framework, background of the facing side of the board painting in traffic yelloew, project information written in englisgh /kannada/ hindi , painting letters and numbers in black fixed on a mild steel angle iron post 75mm x75mm x 6mm, 2nos. firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x45cm x 60 cm, 60cm below ground level and the board 2.8 m from ground level as per apprved drawing ( excluding cost of lattering ) including cost of all materials all labours, lead, lifts, loading, unloading transporting etc., complete(NH Zone SR 2022-23 continued for the Year 2026-27,Pg No.256 , It no.4) As per the directions of Engineer in Charge.
17Data collection of Longitudinal profiling (International roughness Index) . Transverse profiling (Rut depth) Pavement texture in terms of Mean profile depth , Road Geometry data, (Cross slope, gradient, curvature), GPS Coordinates (X, Y, Z) viz longitudinal, latitude & altitude, Video Imaging for Road side furnitures / Road assets and Video imaging for pavement surface Distress and reports.(NH Zone SR 2022-23 continued for the Year 2026-27 , Pg No.141 , It no.10.17)Network Survey Vehicle (NSV) attached with SUV As per the directions of Engineer in Charge.
18White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications. As per the directions of Engineer in Charge. Providing and fixing of retro-reflectarised cautionary ,mandatoryand informatory sign as per IRC:67 made of class B Type IV retro reflective sheeting fixed over 2mm thick Aluminium sheeting vide clause 801.3, 4mm thick aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25x25x3mm angle mounted on a mild steel circular pipe 65NB 3.60mtrs high (min effective height 1.30 mtrs) ,3.2mm thickness firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67,as per clauses including curing cost of all materials all labour, lead, lifts,loading, unloading transporting etc., complete.(NH Zone SR 2022-23 continued for the Year 2026-27,Pg No.104 It no. 8.04 A(ii),A(vi)) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58589155
AUTHORITY Government Departments
TENDER VALUE 6.53 Crore
LAST DATE 18-12-2026
Authority
Authority Name Ministry Of Road Transport And Highways
Work Description Tender for Improvements To Desur Nandihalli Kukdolli Road In Belagavi Taluka(Job No:Crif-Knt-2026-27-363)
Basic Detail
Tender No EE/NHD/BGM/AE03/CRIF Tender-363/2026-27/901 Dt 17/11/2026
Bidding Type Tender
Location
City Belagavi
State Karnataka
Key Dates
Publish Date 18 Nov 2026
Submission Date 18 Dec 2026
Open Date 19 Dec 2026
Finance
Tender Value 6.53 Crore
Tender Fee 8850
EMD 9.79 Lakhs
Exemption Not Available
Document List
156ada80-25ed-4ac0-b9ca-0bf39c8144c5.html
363biddoc.pdf
363conditionsofcontract.pdf
363dtsapprove.pdf
BOQ_982193.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 18, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 29 days
Dec 19, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 30 days

Tender Documents

Download All (ZIP) ↓
html

156ada80-25ed-4ac0-b9ca-0bf39c8144c5.html

pdf

363biddoc.pdf

pdf

363conditionsofcontract.pdf

pdf

363dtsapprove.pdf

xls

BOQ_982193.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender