Tender For Supply, Installation, Testing and Commissioning Of Fire Pump, Fire Panel, Piping And Fire Alarm System Etc. Works. At Kisan Mandi Bhawan.
Tender Value
44.02 Lakhs
Estimated cost
Bid Submission
10 Dec 2026
22 days left
EMD
4.50 Lakhs
Bank guarantee accepted
Document Fee
7800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply, Installation, Testing and Commissioning Of Fire Pump, Fire Panel, Piping And Fire Alarm System Etc. Works. At Kisan Mandi Bhawan.
BOQ
| Sl. No. | Item Description |
| 1 | (a) Supplying, installation, testing and commissioning of Electric driven Main Fire Pump conforming to IS 12469: 2019 suitable for automatic operation and consisting of following, complete in all respects, as required :(b) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal as required.(c) Suitable HP Squirrel cage induction motor,TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-12615: 2018.(d) M.S. fabricated Common base plate, coupling,coupling guard, foundation bolts etc. as required.(e)Suitable cement concrete foundation dulyplastered with anti vibration pads.2280 lpm at 88 m Head |
| 2 | (a) Supplying, installation, testing and commissioning of electric driven pressurisation pump conforming to IS 12469:2019 suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump)(b) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stain less steel shaft, mechanical seal as required.(c) Suitable HP squirell cage induction motor TEFCtype suitable for operation on 415 volts, 3 phase50 Hz AC supply with IP 55 class of protection forenclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-12615: 2018.(d) M.S. fabricated Common base plate, coupling,coupling guard, foundation bolts etc. as required.(e) Suitable cement concrete foundation dulyplastered and with anti vibration pads.180 lpm at 88 m Head |
| 3 | (a) Supplying, installation, testing and commissioning of diesel engine driven main firepump conforming to IS 12469: 2019 suitable for automatic operation and consisting of following,complete in all respects, as required : (Diesel Driven Pump)(b) Horizontal type, multistage, centrifugal pump ofcast of iron body and bronze impeller with stainlesssteel shaft, mechanical seal as required.(c) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12/24 volts electric starting equipment, diesel tank exhaust pipe extended upto 10 m outside pumphouse duly insulated with 50 mm thick glass woolwith 1.0 mm thick aluminium sheet dding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications,painted with post office red colour etc. as required.(d) M.S fabricated, common base plate, coupling,coupling rd,ndation bolts etc. as required(e) Suitable cement concrete foundation duly plastered and with anti vibration pads.2280 lpm at 88 m Head |
| 4 | (a) Supplying, installation, testing and commissioning of electric driven terrace pump conforming to IS 12469: 2019 suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (b) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal as required.(c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-12615: 2018.(d) M.S.fabricated common base plate, coupling, coupling guard, oundation bolts etc.as required.(e) Suitable cement concrete foundation duly plastered and with anti vibration pads. (1) 900 lpm at 35 m Head |
| 5 | CONTROL PANELS :Fabrication, supplying, Installation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable fo main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required INCOMING250A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Digital Ammeter (0-250 A) with selector swtich & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 300AOUTGOING(Note :All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps) Main Fire Pump 125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. (27.4.1 DSR2025) |
| 6 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd.for suitable dia MS pipe connection conforming to IS 904 as required:4 way - 150 mm dia M.S. Pipe |
| 7 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 offollowing sizes as required : (i) 80 mm dia |
| 8 | (ii) 100 mm dia |
| 9 | (iii) 150 mm dia |
| 10 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required :(i) 100 mm dia |
| 11 | (ii) 150 mm dia |
| 12 | (iii) 200 mm dia |
| 13 | Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. |
| 14 | Supplying and fixing air vessel made of 250 mm dia,8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser,drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gaugeand painting with synthetic enamel paint of approved shade as required. |
| 15 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. |
| 16 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :(i) 80 mm dia |
| 17 | (ii) 100 mm dia |
| 18 | Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/Class -II of IS: 3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required(i) 150 mm dia |
| 19 | (ii) 200 mm dia (wall thickness 6.3 mm) |
| 20 | Supplying and fixing single headed internal hydrant valve with nstantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required Single headed stainless steel |
| 21 | Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required :Single headed stainless steel |
| 22 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets conforming to IS 636 (type-A) as required : stainless steel ( Grade 304) |
| 23 | Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle onforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required: stainless steel ( Grade 304) |
| 24 | Supply and Installation weather proof lockable cabinet of size not less than 900X600X450 mm made out of 20 gauge ms (as per BOQ) powder coated sheet of fully welded construction with hinged double front door partially glazed (3 mm glass panel). With locking arrangement, stove enamelled fire red paint (shade No. 536 of IS:5) including neccssary locking arrangement and shall be palnted with one coat of primer and two coats of synthetic enamel paint of approved shade. (External Cabinet). |
| 25 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.(a) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585(b) 20 mm nominal internal dia gun metal globe valve & nozzle.(c) Drum and brackets for fixing the equipmets on wall.(d) Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket30 m |
| 26 | 02 No. mate for dismentling/digging of underground pipe |
| 27 | S/L of aluminim conductor PVC insulated armored, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by Engineer-In-Charge, complete in all respects The armoring of the cable shall be properly connected with the earth conductor by clamps etc. (i) 35 Sqmm 3.5 Core |
| 28 | (ii) 16 Sqmm 4 Core |
| 29 | (iii) 10 Sqmm 4 Core |
| 30 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including ccessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required. |
| 31 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 32 | Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.10 Zone |
| 33 | Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. |
| 34 | Supplying, installation, testing & commissioning of manual call box of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. |
| 35 | Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required. |
| 36 | Supplying, installation, testing & commissioning response cator on surface/recess MS box having two LEDs tallic cover complete with all connections etc. as required. |
| 37 | Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5 % V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger specifications. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications. (a) Two Loop Panel. |
| 38 | Supplying, installation, testing & commissioning of central graphical fire alarm management system to centrally monitor and operate the fire alarm system complete as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
TodayDec 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysDec 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender