Tender For Repairing Of L.T. Line, Supply/Fixing Of Steel Tubular Pole 5 Nos. Supply And Fixing Of Led Street Light 30 Nos. And Rewiring Of Internal Electrification In Office, Check Post And Apf And S/I/C/T Of 01 No. 16 Meter Led High Mast Light, Cab
Tender Overview
Project Description
Tender for Repairing Of L.T. Line, Supply/Fixing Of Steel Tubular Pole 5 Nos. Supply And Fixing Of Led Street Light 30 Nos. And Rewiring Of Internal Electrification In Office, Check Post And Apf And S/I/C/T Of 01 No. 16 Meter Led High Mast Light, Cabling And Main Switch Etc. Works At Nmy Uttaripura Kanpur.
BOQ
| Sl. No. | Item Description |
| 1 | Supply & fixing steel tubular pole 9.50 Metre long designated 410 SP-36 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. |
| 2 | Supply & erection of overhead line with ACSR conductor on poles / service bracket including binding etc. complete in all respects. |
| 3 | Dismantling/Tightening of overhead ACSR conductor. |
| 4 | Supply & erection of overhead line with G.I. wire no. 8 to 4 SWG on poles/service bracket including binding etc. complete in all respect. |
| 5 | Dismantling/Tightening of GI wire. |
| 6 | Supply & fixing of 100 mm x 110 mm shackle insulator /100 mm x 80 mm pin insulator including G.I. Bolts / spindle nuts etc. complete in all respect. |
| 7 | Supply & erection of \\"D\\" clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminum paint . |
| 8 | Supply & fixing of 230 mm x 32 mm x 1.5 mm galvanized steel strips including holes for shackle insulators pins and bolts etc. complete in all respect |
| 9 | Supply and erection of hexagonal/cradle type guard wire no 8 to 4 SWG including binding etc complete in all respect |
| 10 | Dismentling of old Steel Tubular Pole complete in all respects including painting with aluminum paint. |
| 11 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required. |
| 12 | Supply and fixing of one number 6 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site. (5.12) |
| 13 | Supply & erection of stay set at 3.5 Meters away from the pole complete with galvanized 19 mm dia x1.80 Meter long stay rod, 30 cm x 30 x 6.3 mm anchor plate, thimble stay clamps, stay insulator,19 mm 600 mm double screw tightener, 7/3.5 mm G.I. stay wire etc. in 1:3:6 cement concrete complete in all respect. |
| 14 | Painting of the electric pole with 2 coats of aluminum paint over red oxide primer complete in all respects. |
| 15 | S&F of 63 A 415 V.heavy duty double break HRC fuse type metal clad TPN unit on angle iron frame complete in all respect.Cat A (345) |
| 16 | Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. |
| 17 | Supplying, Installation, Testing & Commissioning of 120watt LED Street light fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K 6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single ore cable and earthing etc. as required with Minimum 5 year OEM warranty. complete in all respect. (8.14.16/) |
| 18 | Rewiring for light point point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. modular switch and ceiling rose complete in all respects as directed inculding matching colour wash.Group A (1.15.1/1.24.1) |
| 19 | Wiring for fan point/ exhaust fan point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. modular switch and ceiling rose complete in all respects as directed including matching colour wash. Group A (1.15.1/1.24.1) |
| 20 | Supplying and fixing for plug 5/6amp. modular switch and 3 pin 5/6 amp socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 21 | Wiring for call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. Group A (1.15.1/1.24.1) |
| 22 | Supplying and fixing 6 way double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, (concealed) complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 23 | Supplying and fixing 8 way double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, (concealed) complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 24 | Supply/Fixing of 63 Amp. 4 pole MCB (9/10 K.A.) C- Curve Cat- A |
| 25 | Supply/Fixing of 6 A to 32 Amp. DPMCB (9/10 K.A.) C- Curve Cat- A |
| 26 | Supply/fixing of 5-32 Amp. MCB 9 KA. C-Curve Cat- A |
| 27 | Supplying and fixing of power plug suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 28 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 29 | Supplying, Fixing of 18-22Watt LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KVwith Short & Open circuit protection, THD < 10%, P.F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), DCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. complete in all respect 5 year OEM warranty. |
| 30 | Supplying, Fixing of 30Watt LED Down lighter (SMD Type) (System lumen efficacy >135lm/Watt) LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KVwith Short & Open circuit protection, THD < 10%, P.F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), DCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. complete in all respect 5 year OEM warranty. |
| 31 | Supplying and drawing submain of 2x4 sq mm FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 32 | Supplying and drawing submain of 4x6 sq mm FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 33 | Wiring for circuit/ wiring submain 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 34 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. (5.2) |
| 35 | S/F of one number 6 SWG G.I. Wire in 15mm dia. G.I. Pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand labour. T and P other material required for proper completion of the work as directed at site. (5.12) |
| 36 | S/L of aluminim conductor PVC insulated armored, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by Engineer-In-Charge, complete in all respects The armoring of the cable shall be properly connected with the earth conductor by clamps etc. (i) 10sqmm 2 core |
| 37 | Supplying and fixing 6 Module (200mmX75mm) modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. |
| 38 | Supplying and fixing 12 Module (200mmX150mm) modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. |
| 39 | Supplying and fixing of 25 mm sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 40 | Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal ( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) |
| 41 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 42 | Supplying and fixing brass batten/ angle holder including connection etc. as required. |
| 43 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 44 | Supply and fixing of 16 M high mast pole of approved make with rising system hot dip galvanised inside & out sidehaving pole sheet thickness 4mm top dia minimum 150 mm, bottom dia minimum 380mm, base plate 32mm thick, suitable for wind velocity as per IS 875 part 3 and having no cercumferential weld with aaccessories for high mast such as head frame suitable for 6 luminaries and its controll gear boxes, 1.5HP Power tool motor, 3 point suspension with steel wire rope 6mm dia double drum winch including making suitable foundation as per manufacture drawing and site requirment along with foundation bolts, nuts, washers, anchor plates etc complete in all respect as per direction and satisfaction to the engineer incharge. |
| 45 | Supply & fixing of factory wired integral LED fiood light luminaires with die cast Aluminium housing built with driver set suitable for 200 watt. Confiming to IP 66 Protection complete in all respects. lavaur 18700-22000 system lumens high powar LED with lenses >110m/w,PF>0.95THD<10% at Full load CRI>70,Pottde driver set (Not circuitory) Phase to Phase Protection at 440v&>300v auto cut and restart Feature with 5 years warrantee. CAT-AAA |
| 46 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 47 | Supply and laying of 25 mm x 5 mm G.I. strip from earth electrode directly in the ground as required complete in all respects. |
| 48 | Supply and fixing of 25 Amp. TPN of automatic street light cubicle control panel painted with anty corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case TPN, complete in all respect. |
| 49 | Supply and laying of aluminum conductor, PVC insulated armored served sheathed cable 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick snd all round and protected with burnt brick on sides and on top. On surface, the cable run shall be fixed on M.S. clamps etc. of suitable sizes or as directed by the E/I complete in all respect. The armoring of the cable shall be properly connected with the earth conductor by clamps etc. (a) 16 Sq mm 4 Core |
| 50 | Supply and fixing of palm or pin type copper tin plated cable socket (lug) to the cable leads insulated with tap and making connection etc. complete in all respect as per direction of E / I. (a) 16 Sq mm |
| 51 | Supply and fixing of single unit LED aviation obstruction light complete with transfarmer and LED spiral etc,complete in all respect. Cat.AAA |
| 52 | S&F of 63 A 415 V.heavy duty double break HRC fuse type metal clad TPN unit on angle iron frame complete in all respect.Cat A |
| 53 | S/L of B class Medium duty 50 mm Dia GI Pipe on pole or in road crossing complete in all respects |
| 54 | Wiring for circuit/ submain 4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender