Defence Government Departments Closing in 11 days TDR #58588461

Bids Are invited for Repair And Overhauling Service - Repair Overhauling Of Mooring Capstan Port Stbd Onboard In Ship; Any Other Suitable Brand; No; Buyer Premises - Mooring Capstan (Port & Stbd) . Degutting / Re-Gutting Of Mooring Capstan (Port & St

Issued by Government Departments · Visakhapatnam, Andhra Pradesh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
30 Nov 2026
11 days left
EMD
1.21 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatnam → Andhra Pradesh
EMD Exemption
Not Available
Quantity
1

Project Description

Bids Are invited for Repair And Overhauling Service - Repair Overhauling Of Mooring Capstan Port Stbd Onboard In Ship; Any Other Suitable Brand; No; Buyer Premises - Mooring Capstan (Port & Stbd) . Degutting / Re-Gutting Of Mooring Capstan (Port & Stbd) From/To Onboard Of The Ship. Dismantle The Mooring Drum Top Cover And Mooring Drum, Thereafter Degut The Electric Motor And Handover To Electrical Department For Their Routines. Remove The External Surface Of Drum, Cover And Gear Box External Surface By Way Of Hydro Blasting And Apply Primer. , Mooring Drum & Its Top Cover And Electric Motor. (I) Remove/Reinstall The Warping Drum And Top Cover From/To Onboard Ship. Check The Condition Of Drum, If Found Pitted/Corroded Repair By Way Of Metal Buildup / Thermal Spray And Grinding As Per Profile.(Ii) Degut The Electric Motor And Hand Over To Electrical Department For Their Routines. Re-Gut The Same Post Completion Of Routines, Proper Care Must Be Taken While Degutting & Re-Gutting The Motor And Placing Of Key In The Shaft And Key Way And Coupling. , Slewing Ring Bearing. Dismantle And Check The Condition Of Slewing Ring Bearing Internal And External Condition, Including Groove, Steel Balls And Nylon Buses Renew The Damaged Steel Balls And Bushes As Necessary And Assemble The Slewing Bearing, If, Tooth Profile Fond Any Dents Or Damage Repair/Renew The Entire Part , Gear Box. Dismantle, Defect Identification Of Gear Box, Inspect The Gear Tooth Profile, For Any Evidence Of Burrs, Remove By The Way Of Filing And Buffing (Or) If, Any Damage In Tooth Profile Such As Dents, Sharpen Teeth, Blunt Teeth Renew Full Set Of Gears And Pinions Gears As Necessary. Renew, All Bearings, Cup Seals, Grease Nipples, Oil Level Indicators, Drain Plugs, Fasteners (Which Includes, Bolts, Nuts, Washers, Spring Washers Etc.,), And Damaged Circlips , Trials And Stw. Post Integration And Re-Fitment Onboard, Trials To Be Undertaken To Satisfactory Performance.

BOQ

Sl. No. Item TitleItem Description
1Mooring Capstan (Port & Stbd) . Degutting / Re-gutting of Mooring Capstan (Port & Stbd) from/to onboard of the ship. Dismantle the mooring drum top cover and mooring drum, thereafter degut the electric motor and handover to electrical department for their routines. Remove the external surface of drum, cover and gear box external surface by way of hydro blasting and apply primer.Mooring Capstan (Port & Stbd) . Degutting / Re-gutting of Mooring Capstan (Port & Stbd) from/to onboard of the ship. Dismantle the mooring drum top cover and mooring drum, thereafter degut the electric motor and handover to electrical department for their routines. Remove the external surface of drum, cover and gear box external surface by way of hydro blasting and apply primer.
2Mooring Drum & its top cover and Electric Motor. (i) Remove/reinstall the warping drum and top cover from/to onboard ship. Check the condition of drum, if found pitted/corroded repair by way of metal buildup / thermal spray and grinding as per profile.(ii) Degut the electric motor and hand over to electrical department for their routines. Re-gut the same post completion of routines, proper care must be taken while degutting & re-gutting the motor and placing of key in the shaft and key way and coupling.Mooring Drum & its top cover and Electric Motor. (i) Remove/reinstall the warping drum and top cover from/to onboard ship. Check the condition of drum, if found pitted/corroded repair by way of metal buildup / thermal spray and grinding as per profile.(ii) Degut the electric motor and hand over to electrical department for their routines. Re-gut the same post completion of routines, proper care must be taken while degutting & re-gutting the motor and placing of key in the shaft and key way and coupling.
3Slewing ring bearing. Dismantle and Check the condition of Slewing ring bearing internal and external condition, including groove, steel balls and nylon buses renew the damaged steel balls and bushes as necessary and assemble the slewing Bearing, if, tooth profile fond any dents or damage repair/renew the entire partSlewing ring bearing. Dismantle and Check the condition of Slewing ring bearing internal and external condition, including groove, steel balls and nylon buses renew the damaged steel balls and bushes as necessary and assemble the slewing Bearing, if, tooth profile fond any dents or damage repair/renew the entire part
4Gear Box. Dismantle, defect Identification of gear box, inspect the gear tooth profile, for any evidence of burrs, remove by the way of filing and buffing (or) if, any damage in tooth profile such as dents, sharpen teeth, blunt teeth renew full set of gears and pinions gears as necessary. Renew, all bearings, cup seals, grease nipples, oil level indicators, drain plugs, fasteners (which includes, bolts, nuts, washers, spring washers etc.,), and damaged circlipsGear Box. Dismantle, defect Identification of gear box, inspect the gear tooth profile, for any evidence of burrs, remove by the way of filing and buffing (or) if, any damage in tooth profile such as dents, sharpen teeth, blunt teeth renew full set of gears and pinions gears as necessary. Renew, all bearings, cup seals, grease nipples, oil level indicators, drain plugs, fasteners (which includes, bolts, nuts, washers, spring washers etc.,), and damaged circlips
5Trials and STW. Post integration and re-fitment onboard, trials to be undertaken to satisfactory performance.Trials and STW. Post integration and re-fitment onboard, trials to be undertaken to satisfactory performance.

AI Tender Summary

OUR REF NO 58588461
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 30-11-2026
Authority
Authority Name Indian Navy
Work Description Bids Are invited for Repair And Overhauling Service - Repair Overhauling Of Mooring Capstan Port Stbd Onboard In Ship; Any Other Suitable Brand; No; Buyer Premises - Mooring Capstan (Port & Stbd) . Degutting / Re-Gutting Of Mooring Capstan (Port & Stbd) From/To Onboard Of The Ship. Dismantle The Mooring Drum Top Cover And Mooring Drum, Thereafter Degut The Electric Motor And Handover To Electrical Department For Their Routines. Remove The External Surface Of Drum, Cover And Gear Box External Surface By Way Of Hydro Blasting And Apply Primer. , Mooring Drum & Its Top Cover And Electric Motor. (I) Remove/Reinstall The Warping Drum And Top Cover From/To Onboard Ship. Check The Condition Of Drum, If Found Pitted/Corroded Repair By Way Of Metal Buildup / Thermal Spray And Grinding As Per Profile.(Ii) Degut The Electric Motor And Hand Over To Electrical Department For Their Routines. Re-Gut The Same Post Completion Of Routines, Proper Care Must Be Taken While Degutting & Re-Gutting The Motor And Placing Of Key In The Shaft And Key Way And Coupling. , Slewing Ring Bearing. Dismantle And Check The Condition Of Slewing Ring Bearing Internal And External Condition, Including Groove, Steel Balls And Nylon Buses Renew The Damaged Steel Balls And Bushes As Necessary And Assemble The Slewing Bearing, If, Tooth Profile Fond Any Dents Or Damage Repair/Renew The Entire Part , Gear Box. Dismantle, Defect Identification Of Gear Box, Inspect The Gear Tooth Profile, For Any Evidence Of Burrs, Remove By The Way Of Filing And Buffing (Or) If, Any Damage In Tooth Profile Such As Dents, Sharpen Teeth, Blunt Teeth Renew Full Set Of Gears And Pinions Gears As Necessary. Renew, All Bearings, Cup Seals, Grease Nipples, Oil Level Indicators, Drain Plugs, Fasteners (Which Includes, Bolts, Nuts, Washers, Spring Washers Etc.,), And Damaged Circlips , Trials And Stw. Post Integration And Re-Fitment Onboard, Trials To Be Undertaken To Satisfactory Performance.
Basic Detail
Tender No GEM/2026/B/8265923
Bidding Type Tender
Location
City Visakhapatnam
State Andhra Pradesh
Key Dates
Publish Date 18 Nov 2026
Submission Date 30 Nov 2026
Open Date 01 Dec 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 1.21 Lakhs
Exemption Not Available
Document List
b5e68fcd-72ec-45af-bd11-b8d42d831b55.pdf
1794462020.xlsx
1794992065.pdf
1794992067.pdf
1794992069.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 30, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 11 days
Dec 01, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 12 days

Tender Documents

Download All (ZIP) ↓
pdf

b5e68fcd-72ec-45af-bd11-b8d42d831b55.pdf

xlsx

1794462020.xlsx

pdf

1794992065.pdf

pdf

1794992067.pdf

pdf

1794992069.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender