Tender For Repair To Footpath, Drain, Fencing, Boundary Walls, Culverts And Other Misc Items Of Zone ‘C & Zone ‘D In Their Area Of Age Br-Ii At Mil Stn Bikaner Under Ge(N) Bikaner.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
15 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bikaner → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Footpath, Drain, Fencing, Boundary Walls, Culverts And Other Misc Items Of Zone ‘C & Zone ‘D In Their Area Of Age Br-Ii At Mil Stn Bikaner Under Ge(N) Bikaner.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling posts or struts (wood, steel or RCC), any section, including taking out embedded portion and making good disturbed ground, posts embedded in concrete, brick work, masonry, etc complete all as specified and directed. |
| 2 | Dismantling Chain link fencing wire, any type complete all as specified and directed. |
| 3 | Dismantling structural steel work including door gates etc complete all as specified and directed. |
| 4 | Demolition of cement concrete (unreinforced) in ground floors and paving exceeding 15cm thickness but above above ground floors complete all as specified and directed. |
| 5 | Demolition of cement concrete (reinforced) as in any description and in any position not otherwise specially provided complete all as specified and directed. |
| 6 | Taking down cement or cement lime plaster, any description, on brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed. |
| 7 | Excavation in post holes (or similar holes) in loose/ soft soil each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exeeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and directed. |
| 8 | Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sq m on plan and not exc 1.5 m in depth in soft & loose soil complete all as specified and directed. |
| 9 | Returning, filling in including spreading levelling watering well ramming in layers not exc 25 cm each layer in soft/loose soil complete all as specified and directed. |
| 10 | Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. |
| 11 | M&L for Mild steel work conforming to Fe-290 Gde E-165 in nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc. complete all as specified and directed. |
| 12 | M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 13 | M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thik of an colour having tensile strenght of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 14 | Dismantling plain or corrugated steel sheeting any gauge,thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 15 | M & L for PCC (1:3:6) type C2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete including demolition of old concrete complete all as specified and directed. |
| 16 | Fixing only chain link fencing including line wires 100x100 mm mesh size, 10 gauge galvinised mild steel to any type of standards, rail, straining bolts, complete all as specified and directed. |
| 17 | Supply only chain link mild steel galvanized fencing, any type or size complete all as specified and directed.Note- The weight of chain link fencing shall be ascertained by BOO as odered by GE and Payment shall be made accordingly. |
| 18 | M&L mild steel round bars 10 mm dia or over, cut to length, bend to shape required, fixed independently to support chain link fencing complete all as specified and as directed. (Fe 410-0 or Fe 310-0) |
| 19 | M&L for Mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 50 mm long and dia of shank 11 to 15mm complete all as specified and as directed. |
| 20 | M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, ladders etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing of GDE Fe410-0 or Fe 310-0 complete all as specified and as directed. |
| 21 | Supply and Fixing mild steel work as in flats , ties, straps complete all as specified and as directed. |
| 22 | S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm to 80mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc including removing exixsting unserviceable barbed wire fencing complete all as specified and directed. |
| 23 | M & L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors complete all as specified and as directed. |
| 24 | M&L brick work with fly ash bricks (old size) straight or curved on plan exc 6m mean radius built in CM 1:6 complete and including demolition of old brick work complete all as specified and as directed. |
| 25 | M&L for brick work with fly ash bricks (old size) straight or curved on plan exc 6 mtr mean radius built in CM 1:4 in half brick thick wall and including demolition of brick work complete all as specified and as directed. |
| 26 | M&L brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete and including demolition of brick work complete all as specified and as directed. |
| 27 | M&L for 15mm thick Rendering in cement mortar 1: 4 on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement complete all as specified and as directed. |
| 28 | M&L for 75mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate in sub base in floors and paving ,laid in panels and finished even & fair including demolition of old concrete complete all as specified and as directed. |
| 29 | M&L for 25mm thick sand filling under floors, cushning under interlocking tiles or in foundations incl watering and consolidations complete all as specified and as directed. |
| 30 | M&L 60 mm thick factory made coloured mixed with pigment precast concrete interlocking paver block of grade M-35 confirming to IS 15658-2006 manufactured by vibratory process laid over sand cushioning complete all as specified & directed. |
| 31 | M&L Chequerred cement concrete tiles 30 cm x 30 cm x 25mm thick rubber finish glazed top thick with grey cement & pigmet machine pressed, set, jointed and pointed in neat cement slurry in floors over and including 20 mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed. |
| 32 | M&L for PCC 1:2:4 cement concrete type B-0 using 12.5mm graded stone aggregate in surface channles and drains and inside the manhole finished the surface of even and fair including demolition of old concrete complete all as specified and as directed. |
| 33 | M&L for cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate in coping, plinth course, parapets or roof kerbs ,rounded or chamfered on edges and kerb stone including necessary form work including demolition of old concrete complete all as specified and as directed. |
| 34 | M & L RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in precast cement concrete, manhole covers including all use of forms, moulds or machine moulds and setting the blocks, slabs etc in cement mortar 1:4, complete all as specified and as directed. (Reinforcement shall be measured and paid separately under respective item of schedule \\"A\\") |
| 35 | M&L for Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed. |
| 36 | M&L Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed. |
| 37 | M&L for pre cast RCC jali 35mm thick in PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate set and jointed in CM 1:4 including dismentling of old jali complete all as specified and as directed. |
| 38 | M&L providing reinforced cement concrete type B1 , 1:2:4 (20mm graded aggregate) in precast post for securing RCC jali post straining or terminal post struts etc for fencing average sectional area not exc 100 sq. cm height up to 70cm , with or without chamfered angles and flat splyed, rounded or mitred tops complete all as specified and as directed. |
| 39 | M&L Mild steel framed work as grills, grating and gate etc with ends of bars shouldered and/or riveted of forged into spikes, framed guard bars, ladder, conforming to Fe-410-0 nor Fe-310-0, complete all as specified and directed. |
| 40 | M&L for preparation of old painted steel and iron surfaces of any description over 10cm in width or girth applying a coat of synthetic enamel paint complete all as specified and as directed. |
| 41 | M&L for preparation of new or previously untreated steel and iron surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 42 | M&L for Preparing new plastered or unplastered surfaces of walls and applying two coats of cement paint white or tinted over a coat of primer as per manufacturer's instructions complete all as specified and as directed. |
| 43 | M&L for preparing old plastered or unplastered surfaces of walls and applying two coats of cement paint as per manufacturer's instructions complete all as specified and as directed. |
| 44 | M&L for applying Two or more coats of 100% Premium acrylic emulsion exterior paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10sqm over new surfaces, complete all as specified and directed. |
| 45 | M & L for preparing existing treated surfaces of external walls/ RCC surfaces/soffits of chajjas/roof projections/ cantilevers/balcony etc including cornices and applying 01 coat of exterior emulsion paint @ sqm/litre/1 coat by using roller-to external walls/RCC surfaces/soffits of chajjas/roof projections/ cantilevers/balcony etc surfaces of exterior emulsion by using following brands of emulsion complete all as specified and directed. |
| 46 | M&L for preparation to old painted plastered or concrete surface over 10cm width or girth of any description & applying one coat of synthetic enamel paint complete all as specified and directed. |
| 47 | S&F 110mm bore PVC Pipe (SWR) as in weep holes complete all as specified and as directed. |
| 48 | M&L for hardcore of broken stone gauge n exc. 63mm deposited , spread and levelled in layers n exc. 15cm thick watered and rammed to a true surface complete all as specified and as directed. |
| 49 | M&L for welding metal of thickness exc. 6mm but not exc. 9mm and length not exc. 2.5cm complete all as specified and as directed. |
| 50 | Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sqm area and not exceeding 0.5 sqm fixed with and including onenumber SS clamps (grade -202) of flat 30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & silicon treatment including dismantaling of existing stone slab and tiles of any description ot thickness in floor/dado all as specified and directed. |
| 51 | M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, leveland curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), includingmaking joints with or without grooves(thickness of joints except at sharp curve shall not to more than 5 mm), includingmaking drainage opening wherever required complete all as directed by engr in charge. |
| 52 | M&L for reinforced concrete pipes,300mm bore class NP3 (laid and jointed complete with collars laid in trenches in repair complete all as specified and directed. |
| 53 | M&L for 80mm thick factory made colored mixed with pigment precast concrete interlocking paver block grade M-40 confirming to IS 15658-2006 manufactured by vibratory process laid over sand cushioning complete all as specified and directed. |
| 54 | M&L for 75 mm thick cement concrete 1:2:4 type B-2, using 20mm graded stone aggregate in any Sqm thickness, in flooring/hardstanding laid in alternate panels inci all necessary formwork and vibrator to be used including demolition of old concrete complete all as specified & directed |
| 55 | M&L for PCC 1:3:6 cement concrete type C-2 using 40mm graded stone aggregate in surface channles and drains and inside the manhole finished the surface of even and fair complete all as specified and directed |
| 56 | M&L for 75mm thick Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth Sqm protection,, finished even and smooth using extra cement, laid in panels including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction including demolition of old concrete complete all as specified and as directed. |
| 57 | M&L for preparation of new or previously untreated steel and iron surface of any description n exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysDec 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender