Tender For Comprehensive Maintenance And Periodical Services To Unit Otm And Md Accn In The Area Of Agr Br-Ii At Mil Stn Bikaner Under Ge (N) Bikaner.
Tender Value
49 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
16 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bikaner → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance And Periodical Services To Unit Otm And Md Accn In The Area Of Agr Br-Ii At Mil Stn Bikaner Under Ge (N) Bikaner.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete in any description and in any position not otherwise specially provided complete all as specified and directed. |
| 2 | Taking down cement plaster on brick or stone walls, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 3 | S&F in replacement Vitreous china squatting pan of orissa pattern, white of size 580x440mm with integral foot rest and P or S trap in cluding provision of lime concrete bedding min 150mm thick (1:2:5) inc taking out old WC complete all as specified and directed. |
| 4 | S&F in repair vitreous china wash down water closet pan with fixing bolts, trap (pedestal pattern), white, (excluding flushing cistern and flush pipe) complete fixed in repairs complete all as specified and directed. |
| 5 | S&F in repair vitreous china wash hand basin flat back size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand etc complete fixed in repairs complete all as specified and directed. |
| 6 | S&F in repair 600mm long brass chromium plated towel rail fancy type complete all as specified and directed. |
| 7 | S&F in repair Ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of 25 mm complete all as specified and directed. |
| 8 | S & F in repair PVC valveless syphonic action type flushing cistern, 10 ltr capacity low level , white with inlet, ball valve, float and handle including brackets fixed in repairs complete all as specified and directed. |
| 9 | S&F in repairPVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 10 | S&F in repair Brass chromium plated shower rose 125 mm size with arm including fixing to pipe or union complete all as specified and directed. |
| 11 | S&F in repair Brass chromium plated WHB mixer non telephonic for mixing hot and cold water screwed down for iron pipe 15 mm bore complete all as specified and directed. |
| 12 | S&F in repair brass CP Wall mixer non telephonic for mixing hot and cold water screwed down for iron pipe 15mm bore complete all as specified and directed. |
| 13 | M&L in repair Bib tap 15 mm dia long body , fancy type, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed. |
| 14 | S&F in repair angle valve cast copper alloy fancy type CP with long shank and cup and screwed for 15 mm iron pipe complete all as specified and directed. |
| 15 | M&L in repair Pillar taps, 15mm dia, Chromium plated fancy type, Swan neck , cast copper alloy with capstan heads, screwed down high pressure, long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 16 | S&F in repair 5 mm thick looing mirror of selected quality with and including stainless steel spacers any size complete all as specified and directed. |
| 17 | S& F in repair Plastic water closet seat, any colour , closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 18 | S&F in repair health faucet with 1 mtr silver foil connection long tube and hook and knob complete all as specified and directed. |
| 19 | S&F in repair CP Waste coupling 32/40mm complete all as specified and as directed . |
| 20 | S&F in repair Waste pipe flexible length 900 mm for 32/40mm waste coupling complete all as specified and as directed . |
| 21 | M&L Rotational moulded polyethylene water storage tanks of capacity 500 litres, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and as directed. (Notes : (i) The water storage tanks shall be 3 layers, HDPE tanks moulded to seem-less perfection of rotational moulding process. The tanks shall be manufactured only from FDA approved special grade of polyethylene and shall be certified fit for potable water. (ii) The tanks shall be ISI marked. Also refer paras 18.60 and 18.60 A of MES Schedule Part-I. (iii) Payment for inlet, outlet and over flow pipes and ball valve shall be made separately. However cost of providing necessary GI fittings such as nipples with check nuts for inlet and outlet pipes, GI plug with check nut for over flow pipe and 30 cm long wash out pipe, GI 20mm nominal bore, medium grade and check nut for wash out pipes of size as per actual requirements including dismantling Rotational Moulded plyethyelene water storage tank of capacity of 500 lit completete all as specified and directed by the Engineer-in-Charge shall be deemed to be included in the unit rate of this item.) |
| 22 | Ditto all as per Srl item No 21 here in before but capacity of tank 1000 Litres complete all as specified and directed. |
| 23 | Ditto all as per Srl item No 21 here in before but capacity of tank 5000 Litres complete all as specified and directed. |
| 24 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete (capacity of tanks 500 Ltrs & 1000 Ltrs ltrs) complete all as specified and directed. |
| 25 | Supplying and laying of CPVC pipes of 20 mm dia SDR 11 & Plain CPVC SDR 11 fittings in trenches, wall((100mm away from wall using sutaible clamps) including brass fittings including taking up or down existing steel tubing and connections 15 mm bore complete all as specified. |
| 26 | Supplying and laying of CPVC pipes of 25 mm dia SDR 11 & Plain CPVC SDR 11 fittings in trenches, wall((100mm away from wall using sutaible clamps) including brass fittings including taking up or down existing steel tubing and connections 20 mm bore complete all as specified. |
| 27 | S&F 110mm PVC(SWR)single pipe socketed soil waste and vent pipe in any length with rubber ring joint fixed with lubricants fixed to wall (100mm away from wall using sutaible clamps) including taking down eaves gutters and rain water PVC pipes (any size or pattern) including all fittings, complete all as specified and as directed. |
| 28 | Attending the complaints of AGE B/R like fixing screws to tower bolt/Aldrop bolt/ stoppers,Handle/ Hings in respect of Easening of ( Steel/wooden/Aluminum) door/Windows of any description and size , by cleaning ,adjusting in position and making the same functional incl small repairs if reqd. with and incl greasing , oiling complete all as specified and directed. |
| 29 | Taking down U/S window/chowkats or frames with shutters (without taking off shutters from the frames) size not exc 1.5 sqm each complete all as specified and directed. |
| 30 | Taking down U/S window/chowkats or frames with shutters (without taking off shutters from the frames) size up to 4.00 sqm each complete all as specified and directed. |
| 31 | Taking down shutters of any description up to 2.00 Sqm each pane complete all as specified and directed. |
| 32 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprisingof virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete as per direction of Engineer-in-Charge. |
| 33 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprisingof virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.complete as per direction of Engineer-in-Charge. |
| 34 | M&L Second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 35 | S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube suppling & fixing in opening complete all as specified and directed. |
| 36 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bttom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail, Panneling of plain color PVC sheet to be fitted in the MS frame welded /sealed to the stiles &rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed. |
| 37 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. |
| 38 | S & F Factory made single extruded WPC (Wood Polymer Composite) skeleton door solid plain shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, ater/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. |
| 39 | S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) One side Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and including automatic lock with hinges, designer handle of required size with necessary full body threaded star headed counter sunk SS Screws etc fixed in repairs complete all as specified and directed. |
| 40 | M&L for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings complete all as specified and directed. |
| 41 | M&L for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings complete all as specified and directed. |
| 42 | M&L for providing and fixing Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 43 | S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty/rubber gasket in square n exc 0.50 sqm in each pane for metal frames complete all as specified and directed. |
| 44 | S&F in repair 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty/rubber gasket in square exc 0.50 sqm in each pane for metal frames complete all as specified and directed. |
| 45 | M&L for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not execeeding 0.5 sqm in each pane for metal frames including hacking out old broken glass (any thickness, size, quality or description) complete all as specified and directed. |
| 46 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 47 | S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 48 | S&F curtain rods, 25mm dia Stainless steel, including SS brackets, Knobs etc and fixed in repairs complete all as specified and directed. |
| 49 | S&F in repair door closer of cast iron body, hydraulically regulated, designation No 2, universal type, suitable for door shutters of 701mm to 850mm wide and of weight between 36 to 60 kg, ISI marked complete all as specified and as directed. |
| 50 | S&F butt hings, 100 mm long, extructed aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed. |
| 51 | S&F extruded aluminium alloy handles, 100 mm long, fabricated type anodised complete all as specified and directed. |
| 52 | S&F Aluminium, anodised , 100 mm long, barrel tower bolts of extruded section complete all as specified and directed. |
| 53 | S&F stainless steel sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 54 | S&F stainless steel barrel tower bolts of extruded section 150 mm long complete all as specified and directed. |
| 55 | S&F stainless steel handles cast type anodised, 150 mm size complete all as specified and directed. |
| 56 | S&F in repair automatic hinges with lock 100mm for kitchen cub boards complete all as specified and directed by Engineer in charge |
| 57 | S&F in repair Designer handles 100 mm for kitchen cub boards complete all as specified and as directed. |
| 58 | S&F 100mm Brass mortice lock vertical type 4 lever complete all as specified and directed. |
| 59 | S&F in repair 100mm Brass mortice lock vertical type 4 lever complete all as specified and directed. |
| 60 | S&F in repair Mild steel, 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and directed. |
| 61 | M&L in repair 1.25 mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of prime erected in position as indicated,complete: push pull or manual type complete all as specified and directed. |
| 62 | S&F in repair Ball bearing for rolling shutters complete all as specified and directed. |
| 63 | M&L for demolition of sunken filling concrete, removal of loose concrete and cleaning the surface and after proper cleaning filling the cracks with polymer modified mortar using Dr fixit pidicrete URP and providing 50mmx50mm angle fillets on the vertical upstands, parapet wall junction corners, service units and properly dressed by preparing polymer modified mortar with DR Fixit pidicrete URP in the ratio of 1:3 by adding polymer 10% by weight of the cement, add the water little little unit the required consistency is achieved and thereafter providing and applying two coats of acrylic polymer modified cementitious coating Dr Fixit pidifin 2K of M/s Pidilite Industrieshaving elongation at break 50% 5 bar resistance to positive water pressure, Adhesive strength ASTM D 7234-1 N/mm sq, water vapour transmission as per ASTM E96 of 030 perms and crack bridging ability as per EN 1062-7 upto 1 mm. Apply two coats of Dr Fixit pidifin 2K slurry “ coverage of 0.55-0.58 Sqm/kg of mix slurry. Provide and lay 45 gsm glass fibre mesh over the angle fillet when the first coat is still wet. Allow the first coat to dry for 6-8 hours, then apply the second coat at a direction perpendicular to first coat. Allow the coating to air cure for 5 days before conducting water ponding test for 24 hrs etc or other equivalent product as approved by GE in sunken area complete all as per the manfactures instruction, including removing rubbish material from building and thrown in low lying empty area at any distance out side MD land complete all as specified and as directed . |
| 64 | M&L rendering 10 mm thick in cement plaster (1:3) using coarse sand finished even and smooth without using extra cement with steel trowel on sunken surfaces including using integral water proofing compound.(Note: WPC shall not be measured and paid separately) |
| 65 | M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in mass concrete, filling in sunken floor etc complete all as specified and directed. |
| 66 | M&L Glazed ceremic tiles coloured 450X300mmX7mm/350x250x7 mm thick coloured,set and jointed in neat cement slurry and pointed in white cement or coloured to match colour matching with floor tiles as on vertical surfaces laid over 10mm thick renderind in CM in 1:4 including dismanting of existing floor, hearth or wall tiling, cement mortar bedding and removal of rubbish out of the premises complete all as specified and directed. |
| 67 | M& L for coloured Non skid ceramic tiles exceeding 0.11 sqm but not exceeding 0.18 sqm 7 to 8mm thick in floors set and jointed in neat cement slurry and pointed in coloured cement to match the floor laid over 15mm thick screed in cement mortar 1:6 including dismanting of existing floor, hearth or wall tiling, cement mortar bedding and removal of rubbish out of the premises complete all as specified and directed. |
| 68 | M&L light coloured Vitrified tiles 8-10 mm thick (square /rectangular) area of each tile not exceeding 0.36 sqm, in floors & skirting on 15mm thick screeding in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismanting of existing floor, hearth or wall tiling, cement mortar bedding and removal of rubbish out of the premises complete all as specified and directed. |
| 69 | M&L for16- 18mm thick granite (of any type) work in steps, jambs,pillars, window cills, cooking platforms and like in 20 mm thick screed bed cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid bedded and pointed in any mortar including dismantling of stone slab and tiles of any description or thickness in floor, apron etc complete all as specified and directed. |
| 70 | M&L for machine cut Kota stone slab 20 mm to 25 mm thick , as in flooring/skirting with border, laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to give granite finish, over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6 ) over pcc surface including demolition of existing stone slabs / kota / Marble in floors of any description or thickness complete all as specified and directed. |
| 71 | M&L 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate finished even and smooth without using extra cement laid in panels complete all as specified and directed. |
| 72 | M&L for fly ash Brick work with sub class ‘B’ old burnt brick , straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 including demolition of brick work built in cement mortar including all quions arches pillars etc complete all as specified and directed. |
| 73 | M& L for rendering 10 mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces finished fair and even complete all as specified and directed. |
| 74 | M&L for Rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even as directed by engineer in charge. |
| 75 | M&L for rendering 10mm thick on fair faces of concrete surfaces in cement mortar 1:3,even and smooth without using extra cement as on ceiling complete all as specified and directed. |
| 76 | M&L for preparing new surface of wood of any desc over 10cm width or girth and applying two coats of synthetic enamel paint over pink primer complete all as specified and directed. |
| 77 | M&L for preparing new surface of steel of any desc over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide complete all as specified and directed. |
| 78 | M&L for preparing the old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 79 | M&L for preparing the old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 80 | M&L for preparing of old decorated surfaces of wall and applying one coat of distemper oil emuision with roller including applying white wall care putty for filling the undulations complete all as specified and directed. |
| 81 | M&L for preparing of old decorated surfaces of wall and applying two coat of distemper oil emuision with roller including applying white wall care putty for filling the undulations complete all as specified and directed. |
| 82 | M&L for preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of primer with roller , white or tinted complete all as specified and directed. |
| 83 | M&L for preparing of old decorated surfaces of ceiling and applying one coat of distemper oil emuision complete all as specified and directed. |
| 84 | M&L for preparing new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed. |
| 85 | M&L for preparation of new surfaces of walls applying two coat of cement based paint of first quality by using over a coat of primer all as specified in manufacturers instruction complete all as specified and directed. |
| 86 | M & L for preparation of old surfaces of walls applying one coat of cement based paint of first quality as specified in manufacturers instruction complete all as specified and directed. Please Enable Macros to View BoQ information |
| 87 | M & L for preparation of old surfaces of walls applying one coat of cement based paint of first quality as specified in manufacturers instruction complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysDec 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender