Tender For Electrification Of New Building At Pattiyam Sks In Kannur
Tender Value
1.16 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
6 days left
EMD
2900
Bank guarantee accepted
Document Fee
250
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kannur → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Electrification Of New Building At Pattiyam Sks In Kannur
BOQ
| Sl. No. | Item Description |
| 1 | 1.10.1. Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A |
| 2 | 1.11.Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 3 | 90.3.20.3. Supply & installation of light fittings on TW round block: 1200 mm 1X20W LED lamp with box type fixture, including accessories, lamp, PVC round block, flex wire and connections as required. |
| 4 | 90.3.21.3. Supply & installation of light fittings on 'C/U' shaped flat iron bracket: 1200 mm 1X20W LED lamp with box type fixture, including accessories, brackets, painting and connections as required. |
| 5 | 1.33. Supplying and fixing 3 pin, 5 amp ceiling rose on existing junction box/wooden block including connection etc. as required. |
| 6 | 1.58. Supplying and fixing PVC batten/angle holder including connection etc. as required. |
| 7 | 90.15.4.2. Supply, conveyance, installation, testing and commissioning of 36/40W LED street light, output >105 lumen/W, 4000-6000 K, IP66, specified LED chip, surge protection, aluminium housing and required certificates. |
| 8 | 90.3.18.2. Supply, fabrication, conveyance and fixing 32 mm dia B class GI pipe bent/cut/welded to shape with HG company fabricated clamps, painting and making good as required. |
| 9 | 90.4.1. Supply and installation of suitable size MS rod type fan clamp in RCC slab as per IS 732 as required. |
| 10 | 19.1. Supply, installation, testing and commissioning of 1200 mm sweep BEE-5 star rated BLDC ceiling fan with accessories, regulator, earthing etc. as specified. |
| 11 | 90.4.10. Conveyance, installation, testing and commissioning of exhaust fan up to 450 mm in existing opening, including fixing and connections. |
| 12 | 90.4.8. Charges for cutting holes suitable for exhaust fans up to 305 mm sweep including plastering and colour washing etc. |
| 13 | 1.27.2. Supplying and fixing 3-module GI box with modular base and cover plate (100 mm x 75 mm) for modular switches in recess. |
| 14 | 1.27.5. Supplying and fixing 8-module GI box with modular base and cover plate (125 mm x 125 mm) for modular switches in recess. |
| 15 | 1.24.1. Supplying and fixing 5/6 amp modular switch on existing modular plate and switch box, including connections; excluding modular plate. |
| 16 | 1.24.3. Supplying and fixing 15/16 amp modular switch on existing modular plate and switch box, including connections; excluding modular plate. |
| 17 | 1.24.4. Supplying and fixing 3-pin 5/6 amp socket outlet on existing modular plate and switch box, including connections. |
| 18 | 1.24.5. Supplying and fixing 6-pin 15/16 amp socket outlet on existing modular plate and switch box, including connections. |
| 19 | 90.6.10.1. Supply and fix 20 mm light-gauge PVC conduit with accessories in surface/recess, including cutting wall and making good where recessed. |
| 20 | 90.6.10.2. Supply and fix 25 mm light-gauge PVC conduit with accessories in surface/recess, including cutting wall and making good where recessed. |
| 21 | 1.17.12. Supplying and drawing 3 x 2.5 sq.mm FRLS PVC insulated copper single-core cable in existing surface/recessed steel/PVC conduit. |
| 22 | 1.17.21. Supplying and drawing 3 x 4 sq.mm FRLS PVC insulated copper single-core cable in existing surface/recessed steel/PVC conduit. |
| 23 | 1.17.3. Supplying and drawing 3 x 1.5 sq.mm FRLS PVC insulated copper single-core cable in existing surface/recessed steel/PVC conduit. |
| 24 | 90.6.5.9. Supply and draw 3-core 0.75 sq.mm multi-core PVC insulated/FRLS sheathed flexible copper cable in existing conduit, including connections. |
| 25 | 2.10.1. Supply and fix 5A-32A, 240/415V, 10kA C-curve single-pole MCB for inductive load in existing MCB DB, including connections, testing and commissioning. |
| 26 | 2.12.1. Supply and fix 40A double-pole 240V isolator in existing MCB DB, including connections, testing and commissioning. |
| 27 | 2.3.3. Supply and fix 12-way double-door SPN sheet-steel MCB distribution board with bus bars, earth bar, DIN bar and interconnections; excluding MCB/RCCB/isolator. |
| 28 | 2.14.2. Supply and fix 40A double-pole RCCB, 240V, 30 mA sensitivity, in existing MCB DB including connections, testing and commissioning. |
| 29 | 5.4. Earthing with 600 x 600 x 6 mm GI earth plate, accessories, masonry enclosure, locking cover, watering pipe, charcoal/coke and salt. |
| 30 | 5.9. Supply and lay 25 x 5 mm GI strip at 0.50 m below ground as strip earth electrode, including GI fasteners and overlapping joints. |
| 31 | 90.16.1.1. Supply and draw bare 2.00 mm copper earthing conductor (14 SWG) along with wiring/cables and connect as required. |
| 32 | 90.16.1.3. Supply and draw bare 3.15 mm copper earthing conductor (10 SWG) along with wiring/cables and connect as required. |
| 33 | 90.16.5.1. Supply superior-quality copper earth socket for 2.00 mm (14 SWG) conductor, including crimping. |
| 34 | 90.16.5.3. Supply superior-quality copper earth socket for 3.15 mm (10 SWG) conductor, including crimping. |
| 35 | 90.3.17.2. Supply, conveyance and erection of 40 mm dia B-class GI pipe in single section for post-top lantern on concrete base (base/excavation excluded), including painting. |
| 36 | 90.16.2.1. Supply and lay 15 mm dia medium-class B-class GI pipe 0.6 m below ground, including trench excavation and refilling. |
| 37 | OD173169/2026-2027. Supply and provide 7/9 W LED bulb on existing fitting (Havells/Crompton/Bajaj/Philips/equivalent make). |
| 38 | OD173170/2026-2027. Supply and provide metal-body outdoor bulkhead with glass cover, mesh guard, holder and required flex-wire connections. |
| 39 | OD173171/2026-2027. Supply, conveyance, installation, testing and commissioning of Philips 48043 10W/equivalent mirror light fitting, including connections and making good. |
| 40 | OD173172/2026-2027. Supply of 8/9 inch metal-leaf exhaust fan with standard accessories, suitable for single-phase 230V, 50Hz AC supply (Almonard/equivalent). |
| 41 | OD173173/2026-2027. Supply and provide 12 x 3 mm brass nut and bolt with washers on existing MS box/earth bus, including drilling. |
| 42 | OD173174/2026-2027. Supply and provide 25 x 6 mm brass nut and bolt with washers on existing MS box/earth bus, including drilling. |
| 43 | OD173311/2026-2027. Supply and provide gully trap with cover box/cast iron or ready-made heavy-duty earth cover on existing masonry earth pit, including charcoal/salt and making earth pit good. |
| 44 | OD173313/2026-2027. Supply and provide MS eye-bolt hook in wall/parapet for binding support for KSEB service-wire connection. |
| 45 | OD173314/2026-2027. Supply and install dust- and vermin-proof wall-mounted SMC meter box suitable for KSEB meter, cut-out and neutral link; GS-MB 4537 (inside 450 x 370 x 200), Sintex/equivalent. |
| 46 | OD173316/2026-2027. Prepare completion and test certificates for KSEB connection. |
| 47 | OD173320/2026-2027. Supply and fix 32A HRC fuse base with 32A HRC fuse link in existing meter board, including connections. |
| 48 | OD173321/2026-2027. Supply and fix 32A, 415V 2-way neutral link mounted on DMC/SMC base in existing meter board, including connections. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender