Rural Development Government Departments Closing in 4 days TDR #58585233

Tender For Construction Of Anganwadi Centre Building In Junbani Panchayat Of Dhalbhoomgarh Block.Gr-12

Issued by Government Departments · East Singhbum, Jharkhand
Tender Value
14.91 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
4 days left
EMD
29838
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
East Singhbum → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of Anganwadi Centre Building In Junbani Panchayat Of Dhalbhoomgarh Block.Gr-12

BOQ

Name of Work:- CONSTRUCTION OF ANGANWADI CENTRE BUILDING IN JUNBANI PANCHAYAT OF DHALBHOOMGARH BLOCK.GR-12
Sl. No. Item Description
1Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foudation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l.
2Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume).
3Earth filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation frenches within a lead of 50 M. and lift of 1.5 M all complete as per building specification and direction of E/l (Mode of measurement compacted volume).
4Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.
5Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : M-15 (1:2:4) (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
6Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)
7Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.
8Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l
9Providing designation 125 mm thick reinforced designation 75 A brick work in C.M (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carriage of materials , scafolding, raking out joints to 15 mm depth, curing, taxes and royalty ( but excluding the cost of reinforcement) all complete as per building specification and direction of E/l.
10Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
11Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
12providing and laying 50MM thick DPC (1:2:4)-do--do-
13Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)
14Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
15Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
16Centering and shuttering including strutting, propping etc. and removal of form for Shelves (Cast in situ)
17Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
18Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform
19Providing and fixing fan hook of 16mm dia M.S. bar 1 metre long bent to required size and shape, placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/l. (where material is not supplied by deptt.)
20Supplying, fitting and fixing 200x20x6mm. L-type M.S. clamp properly fishtailed, including making holes and setting the same in 250x125x75mm cement concrete block (1:2:4 )with cost of all labour and materials and taxes as per building specification and direction of E/l.
21Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.)
22Supplying, fitting and fixing callapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2 mm at 100mm. centres and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40x40x6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangements, stoppers, handles, including applying a priming coat of red lead paint, carriage , hoisting and taxes all complete as per building specification and direction of E/l.
23Supplying, fitting and fixing 20 guage G.C.I, sheet gate fitted on M.S. Angle frame of size 60x60x6mm. including cost of fabrication , providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/l.
24Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm .
25Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade Area of slab over 0.50 Sqm. Kitchen platform
26Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
27Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I.With \\"A\\" grade white 15X15cm Tiles.
28Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.
29Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.
30Making 6X6mm grooves in plaster surface over walls trualy horizontal or vertical as specified at regular intervals, at all heights including cleaning, finishing, scaffolding and curring with all leads and lift of water
31Providing 19 mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.
32Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.
33Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.
34Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
35Finishing walls with Premium Acrylic Smooth exterior paint withSilicone additives of required shade:13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
36Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing cleaning and preparing the walls scaffolding washing of floor and taxes all complete as per building specification and direction of E/I
37Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
38Providing Tor steel reinforcement of 8mm. dia. rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. TMT Fe 500 (Only Valid for SAIL & TATA Steel, JSPL ,Electro Steel Ltd. and Vizal Steel)
39Providing Tor steel reinforcement of 10mm. ,12mm & 16mm dia. bars as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. (a) 10mm (TMT,Coil Fe 500) (Only Valid for SAIL & TATA Steel, JSPL ,Electro Steel Ltd. and Vizal Steel)
40(b) 12mm (TMT,Coil Fe 500) (Only Valid for SAIL & TATA Steel, JSPL ,Electro Steel Ltd. and Vizal Steel)
41Providing and laying 18 mm thick marble stone, as sampie of marble approved by engineer-in- charge over 20 mm (average) thick base of cement mortar 1.4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete job
42Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain - 510x1040 mm bowl depth 250 mm
43Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.Plinth protection
44Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/l.
45Supplying brick bats for soak pit with taxes, royalty and cess but exclusive GST all complete job as per specification and direction of E/I
46Carriage of materials from source to site work including loading & unloading all complete job as per specification and direction of E/I (a) Sand Lead-8km pucca
47(b) Brick Lead-8km(1k+7p)
48(c) Stone chips Lead-22km pucca
49Copper point wiring in PVC conduit Wiring For light point/fan pt./exhaust fan pt./call bell pt. with 1.5 sq.mm. FR PVC insulated copper conductor single core cable in recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc. as required Group C
50S/F Suitable size G.I. box with moudlar plate and cover in front on surface or inrecess including Providing and fixing. 3 pin 5/6 Amp modular socket outlet and 5/6 Amp modular switch connection painting etc. as reqd.
51S/F Suitable size G.I. box with moudlar plate and cover in front on surface or inrecess including P.F. 6 pin 15/16 Amp modular socket outlet and 15/16 Amp modular switch connection painting etc. as reqd.
52Wiring for curcuit Submain wiring along with earth wire with the following sizes of PVC insulated copper conductor single core cable in surface of recessed PVC conduit as reqd.2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
53Wiring for curcuit Submain wiring along with earth wire with the following sizes of PVC insulated copper conductor single core cable in surface of recessed PVC conduit as reqd.2 x 2.5 sq.mm + 1 x 2.5 sq. mm earth wire
54Wiring for curcuit Submain wiring along with earth wire with the following sizes of PVC insulated copper conductor single core cable in surface of recessed PVC conduit as reqd.2 x 4.0 Sq mm + 1 x4 Sq mm earth wire
55I.T.C of Ceiling fan including wiring the down rods of standard length ( Up to 30 cm) with 1.5 sq m FRPVC with 1.5 sqmm FRPVC insulalted copper conductor single core cable etc as reqd
56S/F Stepped type electronic fan regulator on the existing plate switch box including connection but excludign modular plate etc as reqd
57Supplying and fixing following way,three pole and neutral sheet ,MCB distribution board ,415 volts,on surface/recess,complete with tinned copper budbar,neutral busbar,earth bar ,din bar,detachable gland palte,interconnections,phospatized and powder painting including erarthing etc.as required.(But without MCB/RCCB/isolator) 4 way (8+12),single door,Vertical type
58Providing and Fitting Ceiling Fan 48\\"…......do….....do…......all complete as per specification and direction of E/E
59Supplying of 9/10 watt LED Bulb….....................do…........do…........all complete as per specification and direction of E/E
60Providing and Fitting Ceiling Fan 48\\"…......do….....do…......all complete as per specification and direction of E/E
61LED STREET LIGHT (30W)
62Construction for 200X165X125MM dia drilled Tube-Well for kinds of soil rock for installation of hand pum D.T.H Rig machine all comple aterials. labours, tools, drilling. drilling, rigs, air co pressor and equipments as well as fuel lubricant for making boring etcand cost of transporting rig machine and other vehicle ehicle up to site work as per specification and direction of Engineer-in-charge. (a) Up to 30mtr. Depth bellow G.L. in Rural Areas
63(a) Up to 30mtr. Depth bellow G.L. in Rural Areas
64Supplying labour cement and calcium chloride or bentonite solution and equipments for Grouting to Casing Pipe all complete job including carriage of material to work site as per specification & direction of E/l
65Supplying all tools, equipments and labour and doing washing. flushing and development of drilled tube well to give clean and clear water all complete as per direction E/l.
66supplying submersible pump sets confirming to iS 8034 and motor confirming to IS 9283 Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller motor suitable for working on 415V+10% 3PH, 50 Hz, AC supply with cable guard thrust carbon/ fibre bearing to with stand entire hydraulic thrust water proof winding shall be provided the pump set shall be suitable for direct coupling pump shall have suitable outlet as per manufactures design anti thrust stream lined non return valve shall be provided with pump 3 meter submersible copper conductor cable in single/double run shall be provided with each pump. submersible pump set 100mm dia (with Polypropylene/noryl impeller) up to 20 stages:-1.5HP
67Cost of 125 mm dia blue UPVC Casing Pipe as per I.S.12818/2016 CML no.-5543459
686 sq mm, 4 core
69Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. Of parry Hindustan or any other I.S.S. Approved make with 100mm H.C.I. 'P' trap 15liters C.I. Pull and let go flushing cistern of names or other I.S.S. Equipment make, complete with all fittings, C.I. or C.C. brackets 32mm alkathene/ P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pert of vitreous white glazed earthenwere were footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.(A) 580 mm. long(a) with 10lit low Level PVC Cistern
70Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps
71Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved qualityand colour, weighing not less than 105 gms.
72Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour,weighing not less than 88 gms.
73Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore
74Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore
75Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes. 75 mm diameter metre
76110 mm diameter
77Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler110 mm.
78Single tee with door110x110x110 mm
79Bend 87.5°110 mm bend
80Shoe (Plain)110 mm Shoe
81Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe withclamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.15 mm nominal dia Pipes
8220 mm nominal dia Pipes
8325 mm nominal dia Pipes
84Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
85Add GST @18%
86Labour Cess 1% Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58585233
AUTHORITY Government Departments
TENDER VALUE 14.91 Lakhs
LAST DATE 23-11-2026
Authority
Authority Name Rural Development Department
Work Description Tender for Construction Of Anganwadi Centre Building In Junbani Panchayat Of Dhalbhoomgarh Block.Gr-12
Basic Detail
Tender No NREP/JSR/Epro-10/2026-27/GR-12
Bidding Type Tender
Location
City East Singhbum
State Jharkhand
Key Dates
Publish Date 18 Nov 2026
Submission Date 23 Nov 2026
Open Date 25 Nov 2026
Finance
Tender Value 14.91 Lakhs
Tender Fee 2500
EMD 29838
Exemption Not Available
Document List
51555f20-5b7b-45f5-b9e0-a932760cdf64.html
BOQ_163915.xls
SBDGR12.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Nov 25, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
html

51555f20-5b7b-45f5-b9e0-a932760cdf64.html

xls

BOQ_163915.xls

pdf

SBDGR12.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender