Tender For Repair Of Roads In Switchyard Premises And Main Road Of Fuse Call At Uihep, Mukhiguda.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
04 Dec 2026
13 days left
EMD
98400
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kalahandi → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Roads In Switchyard Premises And Main Road Of Fuse Call At Uihep, Mukhiguda.
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning the existing black topped surface with removal of foreign materials with brooms or soft brushes and finally dusting with old gunny bags and /or compressed air to receive bituminous treatment etc. complete as per direction of Engineer-in-Charge. |
| 2 | Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with a lift up to 1.5 mtr. and lead up ot 1000 m. etc complete as per direction of Engineer-in-Charge. |
| 3 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam( grading - I ) specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density as per as per direction of Engineer-in-Charge. |
| 4 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam (grading -II) specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density as per as per direction of Engineer-in-Charge. |
| 5 | Making 50 mm x 50 mm furrows, 25mm/ 50mm deep, 45 degree to the center line of the road and at two metre interval in the existing thin bituminous wearing coarse including sweeping and disposal of excavated material within 1000 meters lead etc. complete as per direction of Engineer-in-Charge. |
| 6 | Scraping cleaning the road surface applying tack coat using 3.0Kg of bitumen for 10 Sqm and laying 75mm thick built up spray grouting in two layers 37.5mm thick each layer using 0.45cum of 25mm to 40mm size hard granite (CB) metal and 12.00kg penetration grade of bitumen for 10 sqm in each layer with 0.12cum of 12mm size hard granite (CB) chips as key stone for 10 sqm spreading over and laying including heating pouring and spreading over and spreading bitumen metal and chips and rolling with PRR including hire and running charges of PRR and all other machineries but including cost and conveyance of bitumen, metal and chips complete as per specification and direction of Engineer-in-Charge. |
| 7 | Scarifying the existing granular road surface to a depth of 50 mm and disposal of scarified material with in all lifts and leads upto 1000 meters etc. compete as per direction of Engineer-in-Charge. |
| 8 | Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with in all lifts and lead upto 1000 meters etc. compete as per direction of Engineer-in-Charge. |
| 9 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with pavement etc. compete as per direction of Engineer-in-Charge. |
| 10 | Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means etc. complete as per direction of Engineer-in-Charge. |
| 11 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom complete as per direction of Engineer-in-Charge. |
| 12 | Providing and laying bituminous macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with a hydrostatic paver finisher with sensor control to the required grade,level and alignment ,rolling with smooth wheelede vibratory as per clause 508 of MoSRT&H Specifications for Road & Bridges(4 th Revision) etc. complete as per direction of Engineer-in-Charge. |
| 13 | Providing and laying Semi dense bituminous concrete with batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder of 60/70 penetration grade of bitumen ,transporting the hot mix to work site,laying with a hydrostatic paver finisher with sensor control to the required grade,level and alignment ,rolling with smooth wheelede vibratory as per clause 508 of MoSRT&H Specifications for Road & Bridges (4 th Revision)complete as per direction of Engineer-in-Charge. |
| 14 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 2.5 mm is exclusive of surface applied glass beads per IRC:35. The finished surface to be level,uniform and free from streaks and holes. complete as per direction of Engineer-in-Charge. |
| 15 | Supply and spreading of moorum and consolidation with HRR including watering, Royalty, conveyance of moorum etc. complete as per direction of Engineer-in-Charge. |
| 16 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 meters including removal and disposal of top organic soil not exceeding 150 mm in thickness. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender