Tender For Repair And Renovation Of Biet At Gorumahisani Under Rairangpur Block In The District Of Mayrbhanj For The Year 2026-27_Building
Tender Value
1.51 Crore
Estimated cost
Bid Submission
25 Nov 2026
3 days left
EMD
1.51 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mayurbhanj → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation Of Biet At Gorumahisani Under Rairangpur Block In The District Of Mayrbhanj For The Year 2026-27_Building
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per direction of Engineer in charge. |
| 2 | Dismantling and removing R.C.C. columns beams slab staircase landing lintels including stacking the useful materials for reuse and removing the debris within 50mlead |
| 3 | Dismantling and removing marble chips flooring including stacking the useful materials for reuse and removing the debris within 50m lead etc. complete as per direction of Engineer-in-Charge. |
| 4 | Dismantling and removing R.C.C. Chajja, Shelves, fins and parapet including stacking the useful materials for reuse and removing the debris within 50m lead etc. complete as per direction of Engineer-in-Charge. |
| 5 | Dismantling and removing doors, windows & ventilators including removal of frame,hinges,fastenings and stacking the useful materials for reuse and removing the debris within 50m lead. |
| 6 | Dismantling and removing 2.5 cm thick AS flooring including stacking the useful materials for reuse and removing the debris within 50 m lead etc complete |
| 7 | Removing old lime or cement plaster from walls including racking out joints 12mm deep and stacking the useful materials for reuse and removing the debris within 50m lead. |
| 8 | Earth work in excavation of foundation trenches in hard soil including dressing and leveling the bed up to the required depth and depositing the excavated materials with all leads and lifts T&P shoring & Shuttering if required etc.complete as directed by |
| 9 | Supplying, filling in foundation and plinth with sand including watering ramming, cost, conveyance, royalties and all taxes of materials and cost of labour with T&P required for the work etc. complete as directed by the Engineer-in-charge. |
| 10 | Cement concrete (1:3:6) in foundation and plinth below the base course of flooring using 4cm size black hard hand broken granite stone metals of approved quality from approved quarry including lowering laying concrete watering and curing etc.complete to |
| 11 | Cement concrete of proportion (1:2:4) with 12mm (1/2\\") size hard granite crusher broken chips including watering curing, cost, conveyance, royalties and all taxes of all materials labour with T&P required for the work etc.complete as per direction of Engineer-in-charge. |
| 12 | R.C.C. work of M25 grade having a minimum compresive strength 250kg/cm2 of 15 cm cubes at 28 days using 20mm down grade size black hard crusher broken granite chips including hoisting,lowering, laying and compacting concrete by using vibrator with water....Ground Floor (Column Base) |
| 13 | Ground Floor (RCC coloumn and Beam) |
| 14 | Column |
| 15 | Roof Beam |
| 16 | Roof Slab |
| 17 | Lintel (1st Floor) |
| 18 | Providing HYSD bar reinforcement for R.C.C. work including Straightening, cutting, bending, binding, welding, tying the grills, laying and placing in proper position as per approved design and drawing including cost, conveyance of 18 to 20 gauge binding wire cost and conveyance of HYSD bars complete in all respect as per specification and direction of Engineer-in-Charge. |
| 19 | 1ST Floor |
| 20 | Brick masonary in cement mortar (1:6) using Flyash Bricks of size 10\\" x 5\\" x 3\\" having crushing strength not lessthan 75 Kg/Cm2 in super structure after immersing the bricks for six hours in water before use in superstructure in all florrs with all necessary projection, cutting mlulding, corbelling, champering, watering and curing including cost conveyance, royalties and taxes of all materials and labour T&P required for the work etc.complete as per the direction of Engineer in Charge. |
| 21 | Brick masonary in cement mortar (1:6) using Flyash Bricks of size 10\\" x 5\\" x 3\\" having crushing strength not lessthan 75 Kg/Cm2 in super structure after immersing the bricks for six hours in water before use in superstructure in all florrs with all necessary projection, cutting mlulding, corbelling, champering, watering and curing including cost conveyance, royalties and taxes of all materials and labour T&P required for the work etc.complete as per the direction of Engineer in Charge. |
| 22 | 1st Floor |
| 23 | 2nd Floor |
| 24 | 6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatment with cost, conveyance, royalties and all taxes of all materials and cost of all labour with T & P required for the work complete.treatment.1st Floor |
| 25 | 4cm thick grading concrete (1:2:4) on roof slab using 12mm & downgraded size hard granite chips for old work including providing chicken mess with cost,conveyance,royalties and all taxes of all materials and cost of all labour with T & P required for the work complete.1st Floor |
| 26 | 16mm thick cement plaster (1:6)in finished smooth to outside smooth surface of brick walls afrer racking out joints including watering and curing etc.complete with cost,conveyance royalties,all taxes and cost of all materials and cost of all labour with T&P requred for the work complete. as per the direction of Engineer in Charge. |
| 27 | 1st Floor |
| 28 | 12mm thick cement plaster (1:6)in finished smooth to outside smooth surface of brick walls afrer racking out joints including watering and curing etc.complete with cost,conveyance royalties,all taxes and cost of all materials and cost of all labour with T&P requred for the work complete. as per the direction of Engineer in Charge. |
| 29 | 1st Floor |
| 30 | Fixing Vetrified tiles in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.Ground Floor |
| 31 | 1st Floor |
| 32 | Fixing Vetrified tiles in dados,skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.Ground Floor |
| 33 | 1st Floor |
| 34 | Supplying, fitting, fixing up window (sliding type) made up aluminium section 151-154, 151-155,aswindow frame Section No. 151-155, 151-153 and 151-167 as shutter frame with 5mm thick black glass as pannel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes of labour, T&P etc. complete asper direction of E.I.C |
| 35 | Supplying fitting & fixing of MS doors, windows, grill & grill gate including cost conveyance and taxes of all materials, cost of all labour,T&P required for the work etc. complete as per the direction of Engineer in Charge. |
| 36 | Iron work wrought and putup in trusses and cost of cariege of materials etc. etc. complete as per the direction of Engineer in Charge. |
| 37 | Supplying and fixing of Bluescope sheets in roof including fixing of ridges and wind ties etc. complete but excluding cost of fitting |
| 38 | Painting two coats with any approved paint to new wood/ iron work over a coat of primer including sand papering, polishing the surface, including cost conveyance and all taxes of all materials along with T&P required for the work including cost of paint & primer complete in all respect as per the direction of Engineer in Charge. |
| 39 | 1st Floor |
| 40 | Distempering two coats over a coat of primer of approved shade including cost conveyance taxes of distemper and cost of all labour with T&P required for the work etc.complete as per direction of Engineer in charge. |
| 41 | 1st Floor |
| 42 | Wall painting two coats over a coat of primer with any approved quality of Weather seal coat to give an even shade including cost of all materials,labour, T&p required for the work complete. |
| 43 | 1st Floor |
| 44 | Supplying, fitting and fixing of UPVC (PARE) ceilling with aluminium anodised T Section No. 3215 with 2' 0\\" center to center, L Section No. 1705 up to 15micron on 4 walls to be fixed by means of steel screw & PVC plug and with aluminium grid 2'-0''x2'-0'' suspended from ceilling including cost, conveyance, taxes of all materials, labour, T&P etc. required for the work complete in all respect as per direction of the Engineer-in-charge |
| 45 | Providing & Fixing of wall panelling made out of Aluminium section B 9835 as Horizontal and vertical member placed @ 600mm c/c covered with 9mm thick BWR Ply and 4mm thick sonear American cherry type approved & applied with approved malamine polish with cost of all materials , labour & T&P etc. |
| 46 | Providing & Fixing of Nut, Bolt, 'J' Hook, 'L' Hook etc. complete |
| 47 | PH Work Non-S/R itemsSupplying all materials, labour T&P and fixing Wash Down Water Closet(Europeon type W.C. pan) with Integral S trap to the floor with wooden plug and C.P.screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification & direction of E.I.CE..W.C. with S trap plain(Neycer/ Parry ware/ Cerra/Hindware Make) |
| 48 | Supplying all materials, labour, T&P fitting and fixing Plastic Seat and cover for E.W.C. with chromium plated brass hinges and rubber buffers all complete as perr specification and direction of E.I.C. (Neycer/ Parry ware/ Cerra/Hindware Make) |
| 49 | Supplying all materials labour T&P and fitting & fixing UPVC SWR soil waste ventilating pipes and fittings of the following OD conforming to ISI No.13591/1992 to walls with nails bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturers specification testing e. w. in excavation in all kinds of soil and refilling of trenches as per direction of EIC 110mm dia UPVC SWR Pipe with rain water piping (.Ashirvad / Supreem / Oriplast / Hariplast)110mm dia UPVC SWR Pipe |
| 50 | 110mm dia U-PVC D/J/D |
| 51 | 110mm dia U-PVC P. Trap |
| 52 | 110mm U-PVC S/J with Door |
| 53 | 110mm U-PVC door bend |
| 54 | 110mm dia U-PVC Plain bend |
| 55 | 110mm U-PVC Plain Tee |
| 56 | 110mm U-PVC Cowl |
| 57 | 75mm dia U-PVC SWR Pipe |
| 58 | 75mm dia U-PVC Plain Tee |
| 59 | Supplying all materials labour T&P and fixing wash basins with hole for pillar taps with CI/MS brackets painted white including holes in walls and making good the damages etc .all compt. As per PH sp. And dir. Of EIC.550x400mm WHB-(Neycer/ Parry ware/ Cerra/Hindware Make) |
| 60 | Pedestral 550x400mm WHB |
| 61 | Supplying all materials labour T&P and fixing mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixed to wooden plugs with cp screws and washers compt. As per PH specification and direction of EIC.Fixing of Glass Mirror 600mmx450mm size B.E mirror (fixed type) |
| 62 | Supplying all materials labour T&P and fixing standard size cp towel rail/ring compt. with cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC.CP Towel rail (20x600) heavy Stainless steel. |
| 63 | CP Towel ring heavy Stainless steel |
| 64 | Supplying all materials labour T&P and fixing standard size cp soap holder compt. With cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC Stainless steel with heavy good quality |
| 65 | Supplying all materials, labour T&P and fitting and fixing C.P shower with 15mm or 20 mm inlet with C.P shower arm including polishing all complete as per P.H. specification and direction of EIC 15mm dia cp shower (Jaquar make) (Shower+Arm) |
| 66 | Supplying all materials labour T&P and fitting and fixing 10 ltr capacity low level flushing cistern with a pair of cast iron or m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia cp foush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of EIC. 10ltr Capacity Cistern (Neycer/ Parry ware/ Cerra/Hindware Make) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender