Tender For Electrification Of Dg Set To Building At Vfpck Hq In Kakkanad
Tender Value
1.15 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
7 days left
EMD
3000
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Electrification Of Dg Set To Building At Vfpck Hq In Kakkanad
BOQ
| Sl. No. | Item Description |
| 1 | 90.12.10.3. Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation63/50 mm or nearest size. |
| 2 | 90.12.5.27.Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 25 sq mm |
| 3 | 90.12.7.27.Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps notedalong with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 25 sq mm with factory madeclamp |
| 4 | 90.3.21.3. Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X25 sq.mm (28mm) |
| 5 | 7.10.Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60cm long and fixing the same in ground as required |
| 6 | OD34005/2026-2027.Supplying and providing copper earth clamps for siemens/ tropodur type cableglands of suitable length and other dimensions noted along with each size of glands for the following sizes of cables as required.25sqmm with 12 mm wide x 1 mm thick clip |
| 7 | 90.14.1.2.Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.Fabrication of fully partitioned, dust and vermin proof enclosure for panel assemblyas per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays,indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions,folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame) |
| 8 | 90.14.2.1.Supply and providing 2mm SMC sheet as shrouding for bus interconnection /terminations etc. including required nut & bolt etc. |
| 9 | 90.14.3.1.Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet. |
| 10 | 90.14.5.Supply and fabrication conveyance and installation of angle iron frame work for wallmounting panel board. |
| 11 | 90.14.7.Supply and providing copper earth bus in the panel board. |
| 12 | OD34006/2026-2027 Providing and fixing following capacity 4 pole on load COS unit inside the existing panel board including drilling holes in cubicle panel, making connections, etc. As required.100 Amp 4 pole COS |
| 13 | 1.21.3. Supplying and fixing of following sizes of medium class PVC conduit along withaccessories in surface/ recess including cutting the wall and making good the same incase of recessed conduit as required.32 mm |
| 14 | 90.16.1.2.Supply and drawing bare earthing conductors of the following sizes along withwiring/ cables and giving connection as required2.65 mm copper conductor (12SWG) |
| 15 | 90.16.1.3.Supply and drawing bare earthing conductors of the following sizes along withwiring/ cables and giving connection as required3.15 mm copper conductor ( 10SWG |
| 16 | 90.16.5.2.Supply of superior quality copper earth socket for the following size of earthconductor including crimping etc. as required.2.65 mm (12 SWG) |
| 17 | 90.16.5.3.Supply of superior quality copper earth socket for the following size of earthconductor including crimping etc. as required.3.15 mm (10 SWG) |
| 18 | 90.6.4.63.Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single corecopper conductor cables conforming to IS 694 part I 1990 in the existing surface /recess conduit as required including giving necessary connections of the followingsizes.16.00 sq.mm 4 Run |
| 19 | OD34008/2026-2027.Charges for duplicates copy of the above CAD drawing for submitting the same to the KEI/KSEB for obtaining NOC etc as required . |
| 20 | OD34009/2026-2027.Charges for collecting the electrical installation details and preparing CAD drawing for submitting the same to the KEI/KSEB for obtaining NOC etc as required . |
| 21 | OD34010/2026-2027.Supply and providing 12x3 mm brass bolt with nut and washer etc as required. |
| 22 | OD34011/2026-2027.Supply and providing 25x6 mm brass bolt with nut and washer etc as required |
| 23 | OD34012/2026-2027.Supply and providing Red,green ,black ,orange etc colour LED on the existing enclossure and giving connection etc as required |
| 24 | OD34013/2026-2027.Supply and providing Blue colour LED on the existing enclossure and givingconnection etc as required. |
| 25 | OD34014/2026-2027.Supply and providing 0.5A to 2 A SP MCB on the enclosure and giving connection etc as required |
| 26 | Inspection, Testing fee - Electrical Inspectorate Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender