Rural Development Government Departments Closing in 9 days TDR #58582138

Tender For Construction Of Road From Sodhapali To Haldi Road Via Sodhapali Kata, Halditikira

Issued by Government Departments · Bargarh, Odisha
Tender Value
5.73 Crore
Estimated cost
Bid Submission
01 Dec 2026
9 days left
EMD
5.73 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bargarh → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of Road From Sodhapali To Haldi Road Via Sodhapali Kata, Halditikira

BOQ

Name of Work:- Construction of road from Sodhapali to Haldi road via Sodhapali Kata, Halditikira
Sl. No. Item Description
1Clearing grass and removal of rubbish up to a distance of 50 mtr outside the periphery of the area and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness as per specification and as per the direction of Engineer in charge.
2Dismantaling of of Brick stone masonary in cement mortar above 3 mtr height for existing structures including TandP and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviciable materials and stacking the serviciable materials with all lifts and lead of 1000 m as per specification and as per the direction of Engineer in charge.
3Removing all type of Hume Pipes and Stacking within a lead of 1000 metres including Earthwork and Dismantling of Masonry Works including TandP, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres Upto 600mm dia
4Removing all type of Hume Pipes and Stacking within a lead of 1000 metres including Earthwork and Dismantling of Masonry Works including TandP, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres 600mm to 900mm dia
5Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site by manual means within a lead of 5kms, spreading, grading to required slope and compacting to meet requirement of table 300 2 and clause 305 of MoSRTandH Specifications for Road and Bridge works 4th Revision and as per the direction of engineer in charge.
6Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement as per MORD technical Specification Clause 301 and direction of the Engineer in Charge excluding cost of excavation and transportation to site .
7Providing granular sub base using moorum sand admixture CBR value not less than 20 and PI value not more than 6 mix with required proportion of sand of approved quality including cost, conveyance, royalty and taxes including cost of TandP articles required for the work etc. complete and labour for spreading moorum in layers not exceeding 23cm. thickness watering and compacting to the requried density at OMC with power road roller including cost and carriage of water, all TandP articles with hire and running charges of machineries such as PRR etc. required for the work complete in all respect as per specification and direction of the Engineer in Charge.
8Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including pre mixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRTandH Specifications for Road and Bridge works 4th Revision .
9Construction of Un reinforced,plain cement concrete pavement M 30 grade over a prepared sub base with 43 grade using brande cement at the rate 350 kg per cum,coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, spread, compacted finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures as approved, finishing to lines and grages as per drawing and as per Clause 602 of MoSRTandH specifications for Road and Bridge Works and as per as per specification and direction of the Engineer in Charge.
10Providing and applying primer coat with bitumen emulsion SS on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.60 kg sqm using mechanical means as per Technical Specification Clause 502 of MOSRTandH including cost, conveyance, royalty, taxes of chips and bitumen and other required materials etc. complete and as per direction of Engineer In Charge.
11Providing and laying tack coat with penetration grade of bitumen emulsion RS of 0.20 Kg per Sqm after scraping cleaning the road surface including cost, conveyance royalty of all materials, TandP labour, hire charges of machinaries etc. complete as per Technical Specification Clause 503 of MOSRTandH and as per direction of the Engineer in charge.
12Providing and laying semi dense bituminous concrete with 100 120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder at the rate 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH spefn. clause No. 508 complete.
13Fine dressing and turfing to the slopes of the road embankment with compact dub gross transported by mechanical means as per the direction of the E.I.C.
14Providing and laying of Interlocking Concrete Block pavements having thickness 80 mm as per drawings and Technical Specification Clause 1504.
15Earth work in excavation of foundation and plinth in hard soil including levelling the bed etc complete as per the direction of Engineer in charge.
16Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m
17Providing and filling manually with selected sand in layers not exceeding 200mm thick including watering and compacting with all leads and lifts etc. For finished item of work as per Specification.
18Unit cost of NP3 hume pipes including cost of labour for laying hume pipes 900 mm dia. and as per the direction of Engineer in charge. HPC 600 mm Dia
19Unit cost of NP3 hume pipes including cost of labour for laying hume pipes 900 mm dia. and as per the direction of Engineer in charge. HPC 1000 mm Dia
20Cement concrete of M 150 having maximum compressive strength of 150 kg. cm2 test to be conducted on 150 mm. cubes tested at 28 days including curing tests conducted in accordance with IS 456 and IS 516 and conforming to clause 302 of IRC 21 1987 using clean crusher broken hard granite coarse aggregate of 40 mm. size down grade of approved quality to be protested in the laboratory obtained from approved quarry the proportion mix, grading conforming to relevant ISI IRC codes pre approved including arranging of reinforcement as per approved drawing including hoisting, lowering concrete in layers not exceeding 150 mm. thick each compacting with vibrator watering and curing for 28 days centering shuttering and finishing the exposed surface smooth providing grooves and beads where necessary including cost, conveyance royality and taxes of all labour machineries etc. required for the work complete in all respects including dismantling the centering and shuttering as per specification and direction of Engineer in Charge. Foundation
21Cement concrete of M 150 having maximum compressive strength of 150 kg. cm2 test to be conducted on 150 mm. cubes tested at 28 days including curing tests conducted in accordance with IS 456 and IS 516 and conforming to clause 302 of IRC 21 1987 using clean crusher broken hard granite coarse aggregate of 40 mm. size down grade of approved quality to be protested in the laboratory obtained from approved quarry the proportion mix, grading conforming to relevant ISI IRC codes pre approved including arranging of reinforcement as per approved drawing including hoisting, lowering concrete in layers not exceeding 150 mm. thick each compacting with vibrator watering and curing for 28 days centering shuttering and finishing the exposed surface smooth providing grooves and beads where necessary including cost, conveyance royality and taxes of all labour machineries etc. required for the work complete in all respects including dismantling the centering and shuttering as per specification and direction of Engineer in Charge. Upto Bed Level
22Cement concrete of M 150 having maximum compressive strength of 150 kg. cm2 test to be conducted on 150 mm. cubes tested at 28 days including curing tests conducted in accordance with IS 456 and IS 516 and conforming to clause 302 of IRC 21 1987 using clean crusher broken hard granite coarse aggregate of 40 mm. size down grade of approved quality to be protested in the laboratory obtained from approved quarry the proportion mix, grading conforming to relevant ISI IRC codes pre approved including arranging of reinforcement as per approved drawing including hoisting, lowering concrete in layers not exceeding 150 mm. thick each compacting with vibrator watering and curing for 28 days centering shuttering and finishing the exposed surface smooth providing grooves and beads where necessary including cost, conveyance royality and taxes of all labour machineries etc. required for the work complete in all respects including dismantling the centering and shuttering as per specification and direction of Engineer in Charge. Above Bed Level
23Construction of precast RCC railing of M25 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.
24RCC of design mix of M 25 grade having specified characteristics compressive strength target mean strength of 300kg. cm2 in design mix with minimum quantity of cement as specified in IRC Code of 150 mm. cubes at 28 days curing after mixing and tests conducted in accordance with relevant clauses of IS 456 IS 516 IRC 216 1987 IRC 78 1983 using crusher broken granite course aggregate of 20mm. .sizes and proportion as specified in clause 302.6.2 of IRC 21 1987 and IS 10262 and subject to mix design in conformity with the grading and proportion of different materials for concrete as specified in the relevant codes of approved quality, obtained from approved quarry and using minimum quantity of cement confirming to codal provision including hoisting, lowering and laying concrete in layers not exceeding 15cm thick compacting with vibrators watering and curing for 28 days including water tight steel centering , shuttering and form works finishing the exposed surface smooth providing beads and grooves wherever necessary including cost, conveyance royalties and all other taxes of all materials with all leads and lifts, cost of all labour TandP and machineries etc. required for the work including dewatering if necessary, complete in all respects as per direction of the Engineer in Charge but excluding cost, conveyance of tor steel and binding wire and labour charges for straightening, cutting, bending, binding welding and tying the grills lapping spacing etc. where ever necessary and hoisting and placing in position to be paid separately as required for RCC works Raft
25RCC of design mix of M 25 grade having specified characteristics compressive strength target mean strength of 300kg. cm2 in design mix with minimum quantity of cement as specified in IRC Code of 150 mm. cubes at 28 days curing after mixing and tests conducted in accordance with relevant clauses of IS 456 IS 516 IRC 216 1987 IRC 78 1983 using crusher broken granite course aggregate of 20mm. .sizes and proportion as specified in clause 302.6.2 of IRC 21 1987 and IS 10262 and subject to mix design in conformity with the grading and proportion of different materials for concrete as specified in the relevant codes of approved quality, obtained from approved quarry and using minimum quantity of cement confirming to codal provision including hoisting, lowering and laying concrete in layers not exceeding 15cm thick compacting with vibrators watering and curing for 28 days including water tight steel centering , shuttering and form works finishing the exposed surface smooth providing beads and grooves wherever necessary including cost, conveyance royalties and all other taxes of all materials with all leads and lifts, cost of all labour TandP and machineries etc. required for the work including dewatering if necessary, complete in all respects as per direction of the Engineer in Charge but excluding cost, conveyance of tor steel and binding wire and labour charges for straightening, cutting, bending, binding welding and tying the grills lapping spacing etc. where ever necessary and hoisting and placing in position to be paid separately as required for RCC works Deck slab
26RCC of design mix of M 25 grade having specified characteristics compressive strength target mean strength of 300kg. cm2 in design mix with minimum quantity of cement as specified in IRC Code of 150 mm. cubes at 28 days curing after mixing and tests conducted in accordance with relevant clauses of IS 456 IS 516 IRC 216 1987 IRC 78 1983 using crusher broken granite course aggregate of 20mm. .sizes and proportion as specified in clause 302.6.2 of IRC 21 1987 and IS 10262 and subject to mix design in conformity with the grading and proportion of different materials for concrete as specified in the relevant codes of approved quality, obtained from approved quarry and using minimum quantity of cement confirming to codal provision including hoisting, lowering and laying concrete in layers not exceeding 15cm thick compacting with vibrators watering and curing for 28 days including water tight steel centering , shuttering and form works finishing the exposed surface smooth providing beads and grooves wherever necessary including cost, conveyance royalties and all other taxes of all materials with all leads and lifts, cost of all labour TandP and machineries etc. required for the work including dewatering if necessary, complete in all respects as per direction of the Engineer in Charge but excluding cost, conveyance of tor steel and binding wire and labour charges for straightening, cutting, bending, binding welding and tying the grills lapping spacing etc. where ever necessary and hoisting and placing in position to be paid separately as required for RCC works Pier cap Bed Block
27RCC of design mix of M 25 grade having specified characteristics compressive strength target mean strength of 300kg. cm2 in design mix with minimum quantity of cement as specified in IRC Code of 150 mm. cubes at 28 days curing after mixing and tests conducted in accordance with relevant clauses of IS 456 IS 516 IRC 216 1987 IRC 78 1983 using crusher broken granite course aggregate of 20mm. .sizes and proportion as specified in clause 302.6.2 of IRC 21 1987 and IS 10262 and subject to mix design in conformity with the grading and proportion of different materials for concrete as specified in the relevant codes of approved quality, obtained from approved quarry and using minimum quantity of cement confirming to codal provision including hoisting, lowering and laying concrete in layers not exceeding 15cm thick compacting with vibrators watering and curing for 28 days including water tight steel centering , shuttering and form works finishing the exposed surface smooth providing beads and grooves wherever necessary including cost, conveyance royalties and all other taxes of all materials with all leads and lifts, cost of all labour TandP and machineries etc. required for the work including dewatering if necessary, complete in all respects as per direction of the Engineer in Charge but excluding cost, conveyance of tor steel and binding wire and labour charges for straightening, cutting, bending, binding welding and tying the grills lapping spacing etc. where ever necessary and hoisting and placing in position to be paid separately as required for RCC works Dirt wall
28Supply of HYSD bars confirming to grade S 415 cutting bending, binding, lapping, splicing, welding etc. conforming to ISI specification and jointing if necessary by lapping and tying the grills and placing in position as required for RCC works as per the approved design, hoisting, lowering and laying position including cost and conveyance of tor steel and binding wires of 18 to 20 gauge as to be approved by the Deptt. etc. complete weight of binding wire shall not be considered for payment at all which will be borne by the contractor standard CO efficient of different sizes of the steel shall be considered and welding and lapping should confirm to relevant clause of IRC 21 1987
29Finishing wall surface with waterproof cement paint of aproved shade 2 coats including watering, curing,cost of all materials and labour etc.
30Providing Rough Stone dry packing pitching in approns and revetments for slope protection including cost and conveyance of all materials to site etc. complete 15cm and above and as per the direction of Engineer in charge.
31Providing weepholes in brick masonry stone masonry, plain reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1 V :20 H towards drawing face complete as per drawing
32Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be we be welded to 2 nos. 75mmX75mm of12 SWG sheet tubes posts duly embeded in cement concrete M 15 grade block of 450mm X450mmmm X600mm ,600mm below ground level. The top most diamond plate will be welded to middle plate by 47mmX 47mm of 12 SWG steel plate tube. All M.S will be stove embelded on both sides .Lettering and printing arrows border etc. will be painted with ready mixed synthetic enamelpaint of superior quality in required shade andcloure.All sections of framed posts and steel tube will be painted with primer and two coat of epoxy paint as per drawing clause 1701 and Annexure 1700.1
33Providing and fixing of typical MMSY Citizen Information board as per MORD specification and drawing. Three MS plates of 50 x 5 mm. thick, back plate duty welded with 75 mm dia steel tubes back on edges as per drawings. The upper and lowe plate will be welded with MS flat iron frame of 50mm x 5 mm. The steel tubes dully embeded in cement concrete M 15 grade blocksw of 600mm x 600 mm x 750 mm below ground level. All MS will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with redimixed synthetic enamel paint of superor quality in required shade and colour. All selection of framed posts and steel tubes will be painted with primer and two coats of epoxupaint as per drawing Clause 1701 and Annexure 1700.1.
34Providing and erecting direction and place identification retro reflectorized sign as per IRC 67made of high intensity grade sheeting vide Clause 801.3, fixed over Aluminium sheeting 2mm thick supported on a mild steel single double angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade concrete 45 x 45 x 60 cm, 60 cm below ground level as per drawing and technical specfication Clause 801 of of specification for road and bridge works 5th revision and as directed by Engineer in charge. 90 cm Equilateral traingle
35Providing and erecting direction and place identification retro reflectorized sign as per IRC 67made of high intensity grade sheeting vide Clause 801.3, fixed over Aluminium sheeting 2mm thick supported on a mild steel single double angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade concrete 45 x 45 x 60 cm, 60 cm below ground level as per drawing and technical specfication Clause 801 of of specification for road and bridge works 5th revision and as directed by Engineer in charge. 60 cm Circular
36Providing and erecting direction and place identification retro reflectorized sign as per IRC 67made of high intensity grade sheeting vide Clause 801.3, fixed over Aluminium sheeting 2mm thick supported on a mild steel single double angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade concrete 45 x 45 x 60 cm, 60 cm below ground level as per drawing and technical specfication Clause 801 of of specification for road and bridge works 5th revision and as directed by Engineer in charge. 80 cm x 60 cm rectangular
37Providing and erecting direction and place identification retro reflectorized sign as per IRC 67made of high intensity grade sheeting vide Clause 801.3, fixed over Aluminium sheeting 2mm thick supported on a mild steel single double angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade concrete 45 x 45 x 60 cm, 60 cm below ground level as per drawing and technical specfication Clause 801 of of specification for road and bridge works 5th revision and as directed by Engineer in charge. 90 cm high octagon
38Providing and erecting direction and place identification retro reflectorized sign as per IRC 67made of high intensity grade sheeting vide Clause 801.3, fixed over Aluminium sheeting 2mm thick supported on a mild steel single double angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade concrete 45 x 45 x 60 cm, 60 cm below ground level as per drawing and technical specfication Clause 801 of of specification for road and bridge works 5th revision and as directed by Engineer in charge. Direction Marking
39Providing and erecting direction and place identification retro reflectorized sign as per IRC 67made of high intensity grade sheeting vide Clause 801.3, fixed over Aluminium sheeting 2mm thick supported on a mild steel single double angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade concrete 45 x 45 x 60 cm, 60 cm below ground level as per drawing and technical specfication Clause 801 of of specification for road and bridge works 5th revision and as directed by Engineer in charge. Hazard Marker
40Providing and erecting Informatory retro reflectorised sign as per IRC 67 2012 made of class B retro reflective sheeting of high intensity prismatic grade sheeting as per ASTMD4956 09type III and IV strictly conforming to clause 6.7of IRC67 2012 and vide clause 801.3, fixed over aluminium sheeting, 2.00mm thick as per clause 6.5.2 of IRC:67 2012 or A.C.P Aluminium Composite Panel used for sign boards with a thermo plastic core of blow density polythylene LDPE between two thick sheets of aliminium with over all thickness of 4mm and aliminium thichness of 0.5mm on both sides supported on mildsteel square post 80mmx80mmx3mm, 2nos and 3nos horizontal and 1no vertical extra supporting member of M.Sangle of size 50mmx50mmx6mm firmly fixed to the ground by means properly designed foundation withM 15 grade cement concrete 45cmx45cmx75cm, 60cm below ground level of as per approved drawing including cost, conveyance, royality, taxes of all materials, labour, TandP, excavation, curingetc. complete,under supervision of Engineer In Charge.Size 12'X8' 3657mm x 2438mm Rectangle
41Provision for Road sinage masonary structure for citizen information board,painting of 200 m and k.m stone etc complete and as per the direction of engineer in charge. Ordinary Kilometer stone
42Provision for Road sinage masonary structure for citizen information board,painting of 200 m and k.m stone etc complete and as per the direction of engineer in charge. 200 mm stone
43Provision for Road sinage masonary structure for citizen information board,painting of 200 m and k.m stone etc complete and as per the direction of engineer in charge. Semi reflectorised Sign Boards
44Construction of RCC Guard posts of 200mm dia M15 grade cast-in situ with 20 mm nominal size aggregate,true to line and grade,tolerance of vertical RCC posts not to exceed 1 in 500 as per drawing and Technical specification Clauseas per the direction of engineer in charge.
45Maintenance Work Restoration of rain cuts with soil, moorum gravel or a mixture of these, clearing the loose soil, benching for 300mm width laying fresh material in layers not exceeding 250 mm and compaction with plate compactor or power rammer to restore the original alignment ,level and slopes as per technical specification Clause 1902 1 st Year
46Restoration of rain cuts with soil, moorum gravel or a mixture of these, clearing the loose soil, benching for 300mm width laying fresh material in layers not exceeding 250 mm and compaction with plate compactor or power rammer to restore the original alignment ,level and slopes as per technical specification Clause 19022 st Year
47Restoration of rain cuts with soil, moorum gravel or a mixture of these, clearing the loose soil, benching for 300mm width laying fresh material in layers not exceeding 250 mm and compaction with plate compactor or power rammer to restore the original alignment ,level and slopes as per technical specification Clause 19023 st Year
48Restoration of rain cuts with soil, moorum gravel or a mixture of these, clearing the loose soil, benching for 300mm width laying fresh material in layers not exceeding 250 mm and compaction with plate compactor or power rammer to restore the original alignment ,level and slopes as per technical specification Clause 19024 st Year
49Restoration of rain cuts with soil, moorum gravel or a mixture of these, clearing the loose soil, benching for 300mm width laying fresh material in layers not exceeding 250 mm and compaction with plate compactor or power rammer to restore the original alignment ,level and slopes as per technical specification Clause 19025 st Year
50Making up loose of material irregularities on shoulders to the design level by adding fresh approved selected soil and compacting it with appropriate equipment at OMC upto a lead of 1000 m as per technical specification Clause 1903 1 st Year
51Making up loose of material irregularities on shoulders to the design level by adding fresh approved selected soil and compacting it with appropriate equipment at OMC upto a lead of 1000 m as per technical specification Clause 19032 st Year
52Making up loose of material irregularities on shoulders to the design level by adding fresh approved selected soil and compacting it with appropriate equipment at OMC upto a lead of 1000 m as per technical specification Clause 19033 st Year
53Making up loose of material irregularities on shoulders to the design level by adding fresh approved selected soil and compacting it with appropriate equipment at OMC upto a lead of 1000 m as per technical specification Clause 1903 4 st Year
54Making up loose of material irregularities on shoulders to the design level by adding fresh approved selected soil and compacting it with appropriate equipment at OMC upto a lead of 1000 m as per technical specification Clause 1903 5 st Year
55Stripping excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor at OMC as per drawings and Technical Specification Clause 1903 1 st Year
56Stripping excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor at OMC as per drawings and Technical Specification Clause 19032 st Year
57Stripping excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor at OMC as per drawings and Technical Specification Clause 19033 st Year
58Stripping excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor at OMC as per drawings and Technical Specification Clause 19034 st Year
59Stripping excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor at OMC as per drawings and Technical Specification Clause 1903 5 st Year
60Maintenance of BT road including filling up pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre mix carpet and seal coat type B specification Clause 1904.2 ,1906 1 st Year
61Maintenance of BT road including filling up pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre mix carpet and seal coat type B specification Clause 1904.2 ,19062 st Year
62Maintenance of BT road including filling up pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre mix carpet and seal coat type B specification Clause 1904.2 ,19063 st Year
63Maintenance of BT road including filling up pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre mix carpet and seal coat type B specification Clause 1904.2 ,19064 st Year
64Maintenance of BT road including filling up pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre mix carpet and seal coat type B specification Clause 1904.2 ,19065 st Year
65Maintenance of Hume pipe Culvert by way of Clearing, Cleaning, Erosion repair, repairs to cracks, parapet wall and protection work as per drawing and technical specification Clause 1908 1 st Year
66Maintenance of Hume pipe Culvert by way of Clearing, Cleaning, Erosion repair, repairs to cracks, parapet wall and protection work as per drawing and technical specification Clause 1908 2 st Year
67Maintenance of Hume pipe Culvert by way of Clearing, Cleaning, Erosion repair, repairs to cracks, parapet wall and protection work as per drawing and technical specification Clause 1908 3 st Year
68Maintenance of Hume pipe Culvert by way of Clearing, Cleaning, Erosion repair, repairs to cracks, parapet wall and protection work as per drawing and technical specification Clause 1908 4 st Year
69Maintenance of Hume pipe Culvert by way of Clearing, Cleaning, Erosion repair, repairs to cracks, parapet wall and protection work as per drawing and technical specification Clause 1908 5 st Year
70Maintenance of road signs by way of cleaning and repainting of mandatory requlatory cautionary informatory and place identifications sign board as per drawings and technical specification Clause 19101 st Year
71Maintenance of road signs by way of cleaning and repainting of mandatory requlatory cautionary informatory and place identifications sign board as per drawings and technical specification Clause 19102 st Year
72Maintenance of road signs by way of cleaning and repainting of mandatory requlatory cautionary informatory and place identifications sign board as per drawings and technical specification Clause 19103 st Year
73Maintenance of road signs by way of cleaning and repainting of mandatory requlatory cautionary informatory and place identifications sign board as per drawings and technical specification Clause 19104 st Year
74Maintenance of road signs by way of cleaning and repainting of mandatory requlatory cautionary informatory and place identifications sign board as per drawings and technical specification Clause 19105 st Year
75Maintenance of 200 metre km stone by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and technical specification Clause 19121 st Year
76Maintenance of 200 metre km stone by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and technical specification Clause 19122 st Year
77Maintenance of 200 metre km stone by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and technical specification Clause 19123 st Year
78Maintenance of 200 metre km stone by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and technical specification Clause 19124 st Year
79Maintenance of 200 metre km stone by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and technical specification Clause 19125 st Year
80Cutting of branches of trees and shrubs from the road way or with in R.O.W including disposal of wood and leaves to suitable location as per technical specification Clause 19141 st Year
81Cutting of branches of trees and shrubs from the road way or with in R.O.W including disposal of wood and leaves to suitable location as per technical specification Clause 19142 st Year
82Cutting of branches of trees and shrubs from the road way or with in R.O.W including disposal of wood and leaves to suitable location as per technical specification Clause 19143 st Year
83Cutting of branches of trees and shrubs from the road way or with in R.O.W including disposal of wood and leaves to suitable location as per technical specification Clause 19144 st Year
84Cutting of branches of trees and shrubs from the road way or with in R.O.W including disposal of wood and leaves to suitable location as per technical specification Clause 19145 st Year
85Cutting of shrubs from the road way or with in R.O.W and disposal of shrubs to suitable locations as per technical specifications Clause 1914 1 st Year
86Cutting of shrubs from the road way or with in R.O.W and disposal of shrubs to suitable locations as per technical specifications Clause 19142 st Year
87Cutting of shrubs from the road way or with in R.O.W and disposal of shrubs to suitable locations as per technical specifications Clause 19143 st Year
88Cutting of shrubs from the road way or with in R.O.W and disposal of shrubs to suitable locations as per technical specifications Clause 19144 st Year
89Cutting of shrubs from the road way or with in R.O.W and disposal of shrubs to suitable locations as per technical specifications Clause 19145 st Year
90Trimming of grass and weeds from the shoulders berms and disposing off the same to suitable locations as per technical specifications Clause 19141 st Year
91Trimming of grass and weeds from the shoulders berms and disposing off the same to suitable locations as per technical specifications Clause 19142 st Year
92Trimming of grass and weeds from the shoulders berms and disposing off the same to suitable locations as per technical specifications Clause 19143 st Year
93Trimming of grass and weeds from the shoulders berms and disposing off the same to suitable locations as per technical specifications Clause 19144 st Year
94Trimming of grass and weeds from the shoulders berms and disposing off the same to suitable locations as per technical specifications Clause 19145 st Year
95White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications Clause 19151 st Year
96White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications Clause 19152 st Year
97White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications Clause 19153 st Year
98White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications Clause 19154 st Year
99White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications Clause 19155 st Year
100Cement concrete 1:3:6 in foundation and plinth with 4cm. crusher broken granite metal of approved quality from approved quarry including hoisting lowering and laying in layers not exceeding 150mm. thick with proper packing and ramming each layer of concrete by means of vibrator ,providing groove and beads where necessary including curing, dewatering, shoring, shuttering if necessary at the time of laying concrete with cost, conveyance royality and taxes of all material required for the work including supplying and working pumps, TandP articles finishing the exposed surface smooth as per specific ation and direction of the Engineer in Charge Foundation
101RCC of design mix of M 300grade having specified characteristics compressive strength target mean strength of 300kg. cm2 in design mix with minimum quantity of cement as specified in IRC Code of 150 mm. cubes at 28 days curing after mixing and tests conducted in accordance with relevant clauses of IS 456 IS 516 IRC 216 1987 IRC 78 1983 using crusher broken hard granite course aggregate of 20mm. down graded sizes and proportion as specified in clause 302.6.2 of IRC 21 1987 and IS 10262 and subject to mix design in conformity with the grading and proportion of different materials for concrete as specified in the relevant codes of approved quality, obtained from approved quarry and using minimum quantity of cement confirming to codal provision including hoisting, lowering and laying concrete in layers not exceeding 15cm thick compacting with vibrators watering and curing for 28 days including water tight steel centering , shuttering and form works finishing the exposed surface smooth providing beads and grooves wherever necessary including cost, conveyance royalties and all other taxes of all materials with all leads and lifts, cost of all labour TandP and machineries etc. required for the work including dewatering if necessary, complete in all respects as per direction of the Engineer in Charge but excluding cost, conveyance of tor steel and binding wire and labour charges for straightening, cutting, bending, binding welding and tying the grills lapping spacing etc. where ever necessary and hoisting and placing in position to be paid separately as required for RCC works Abutment and Pier Shaft Foundation
102RCC of design mix of M 300grade having specified characteristics compressive strength target mean strength of 300kg. cm2 in design mix with minimum quantity of cement as specified in IRC Code of 150 mm. cubes at 28 days curing after mixing and tests conducted in accordance with relevant clauses of IS 456 IS 516 IRC 216 1987 IRC 78 1983 using crusher broken hard granite course aggregate of 20mm. down graded sizes and proportion as specified in clause 302.6.2 of IRC 21 1987 and IS 10262 and subject to mix design in conformity with the grading and proportion of different materials for concrete as specified in the relevant codes of approved quality, obtained from approved quarry and using minimum quantity of cement confirming to codal provision including hoisting, lowering and laying concrete in layers not exceeding 15cm thick compacting with vibrators watering and curing for 28 days including water tight steel centering , shuttering and form works finishing the exposed surface smooth providing beads and grooves wherever necessary including cost, conveyance royalties and all other taxes of all materials with all leads and lifts, cost of all labour TandP and machineries etc. required for the work including dewatering if necessary, complete in all respects as per direction of the Engineer in Charge but excluding cost, conveyance of tor steel and binding wire and labour charges for straightening, cutting, bending, binding welding and tying the grills lapping spacing etc. where ever necessary and hoisting and placing in position to be paid separately as required for RCC works Abutment and Pier Shaft Above Bed
103RCC of design mix of M 300grade having specified characteristics compressive strength target mean strength of 300kg. cm2 in design mix with minimum quantity of cement as specified in IRC Code of 150 mm. cubes at 28 days curing after mixing and tests conducted in accordance with relevant clauses of IS 456 IS 516 IRC 216 1987 IRC 78 1983 using crusher broken hard granite course aggregate of 20mm. down graded sizes and proportion as specified in clause 302.6.2 of IRC 21 1987 and IS 10262 and subject to mix design in conformity with the grading and proportion of different materials for concrete as specified in the relevant codes of approved quality, obtained from approved quarry and using minimum quantity of cement confirming to codal provision including hoisting, lowering and laying concrete in layers not exceeding 15cm thick compacting with vibrators watering and curing for 28 days including water tight steel centering , shuttering and form works finishing the exposed surface smooth providing beads and grooves wherever necessary including cost, conveyance royalties and all other taxes of all materials with all leads and lifts, cost of all labour TandP and machineries etc. required for the work including dewatering if necessary, complete in all respects as per direction of the Engineer in Charge but excluding cost, conveyance of tor steel and binding wire and labour charges for straightening, cutting, bending, binding welding and tying the grills lapping spacing etc. where ever necessary and hoisting and placing in position to be paid separately as required for RCC works Column Wing Wall Tie Beam
104RCC of design mix of M 300grade having specified characteristics compressive strength target mean strength of 300kg. cm2 in design mix with minimum quantity of cement as specified in IRC Code of 150 mm. cubes at 28 days curing after mixing and tests conducted in accordance with relevant clauses of IS 456 IS 516 IRC 216 1987 IRC 78 1983 using crusher broken hard granite course aggregate of 20mm. down graded sizes and proportion as specified in clause 302.6.2 of IRC 21 1987 and IS 10262 and subject to mix design in conformity with the grading and proportion of different materials for concrete as specified in the relevant codes of approved quality, obtained from approved quarry and using minimum quantity of cement confirming to codal provision including hoisting, lowering and laying concrete in layers not exceeding 15cm thick compacting with vibrators watering and curing for 28 days including water tight steel centering , shuttering and form works finishing the exposed surface smooth providing beads and grooves wherever necessary including cost, conveyance royalties and all other taxes of all materials with all leads and lifts, cost of all labour TandP and machineries etc. required for the work including dewatering if necessary, complete in all respects as per direction of the Engineer in Charge but excluding cost, conveyance of tor steel and binding wire and labour charges for straightening, cutting, bending, binding welding and tying the grills lapping spacing etc. where ever necessary and hoisting and placing in position to be paid separately as required for RCC works Abutment and pier cap
105RCC of design mix of M 300grade having specified characteristics compressive strength target mean strength of 300kg. cm2 in design mix with minimum quantity of cement as specified in IRC Code of 150 mm. cubes at 28 days curing after mixing and tests conducted in accordance with relevant clauses of IS 456 IS 516 IRC 216 1987 IRC 78 1983 using crusher broken hard granite course aggregate of 20mm. down graded sizes and proportion as specified in clause 302.6.2 of IRC 21 1987 and IS 10262 and subject to mix design in conformity with the grading and proportion of different materials for concrete as specified in the relevant codes of approved quality, obtained from approved quarry and using minimum quantity of cement confirming to codal provision including hoisting, lowering and laying concrete in layers not exceeding 15cm thick compacting with vibrators watering and curing for 28 days including water tight steel centering , shuttering and form works finishing the exposed surface smooth providing beads and grooves wherever necessary including cost, conveyance royalties and all other taxes of all materials with all leads and lifts, cost of all labour TandP and machineries etc. required for the work including dewatering if necessary, complete in all respects as per direction of the Engineer in Charge but excluding cost, conveyance of tor steel and binding wire and labour charges for straightening, cutting, bending, binding welding and tying the grills lapping spacing etc. where ever necessary and hoisting and placing in position to be paid separately as required for RCC works Dirt wall
106RCC of design mix of M 300grade having specified characteristics compressive strength target mean strength of 300kg. cm2 in design mix with minimum quantity of cement as specified in IRC Code of 150 mm. cubes at 28 days curing after mixing and tests conducted in accordance with relevant clauses of IS 456 IS 516 IRC 216 1987 IRC 78 1983 using crusher broken hard granite course aggregate of 20mm. down graded sizes and proportion as specified in clause 302.6.2 of IRC 21 1987 and IS 10262 and subject to mix design in conformity with the grading and proportion of different materials for concrete as specified in the relevant codes of approved quality, obtained from approved quarry and using minimum quantity of cement confirming to codal provision including hoisting, lowering and laying concrete in layers not exceeding 15cm thick compacting with vibrators watering and curing for 28 days including water tight steel centering , shuttering and form works finishing the exposed surface smooth providing beads and grooves wherever necessary including cost, conveyance royalties and all other taxes of all materials with all leads and lifts, cost of all labour TandP and machineries etc. required for the work including dewatering if necessary, complete in all respects as per direction of the Engineer in Charge but excluding cost, conveyance of tor steel and binding wire and labour charges for straightening, cutting, bending, binding welding and tying the grills lapping spacing etc. where ever necessary and hoisting and placing in position to be paid separately as required for RCC works Desk Slab
107RCC of design mix of M 300grade having specified characteristics compressive strength target mean strength of 300kg. cm2 in design mix with minimum quantity of cement as specified in IRC Code of 150 mm. cubes at 28 days curing after mixing and tests conducted in accordance with relevant clauses of IS 456 IS 516 IRC 216 1987 IRC 78 1983 using crusher broken hard granite course aggregate of 20mm. down graded sizes and proportion as specified in clause 302.6.2 of IRC 21 1987 and IS 10262 and subject to mix design in conformity with the grading and proportion of different materials for concrete as specified in the relevant codes of approved quality, obtained from approved quarry and using minimum quantity of cement confirming to codal provision including hoisting, lowering and laying concrete in layers not exceeding 15cm thick compacting with vibrators watering and curing for 28 days including water tight steel centering , shuttering and form works finishing the exposed surface smooth providing beads and grooves wherever necessary including cost, conveyance royalties and all other taxes of all materials with all leads and lifts, cost of all labour TandP and machineries etc. required for the work including dewatering if necessary, complete in all respects as per direction of the Engineer in Charge but excluding cost, conveyance of tor steel and binding wire and labour charges for straightening, cutting, bending, binding welding and tying the grills lapping spacing etc. where ever necessary and hoisting and placing in position to be paid separately as required for RCC works Approch Slab
108Provision and Reinforced cement concrete crash barrier at thr bridge desk and approches to bridge structure, constructed with with reinforced cement concrete with HYSD Reinforcement conforming MoRth specification and as per detail given IRC 5 including dowel bar, Expansion Joint filled with pre moulded asphalt filler board etc. and approved drawing and at location directed by the engineer all as specified.
109Providing and laying of wearing course of 56mm thick consisting of 6mm thick mastic asphalt and 50 mm thick asphaltic concrete on top of the Deck slab. The mastic asphalt shall be of paving grade bitumen meeting the requirement given in the table 500 39, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, applying prime coat including providing antiskid surface with bitumen precoated fine grained hard stone chipping all complete as per clause 501, 502, 503 and 516 of MoRTandH Specification for road and bridge works 5th revision , followed by asphaltic concrete to be laid in two layers of 25mm thick each over tack coat etc complete as per approved drawing and technical specification Clause No 503 and 507 of MoRTandH specifications for road and Bridge work 5th revision and as per direction of the Engineer in charge.
110Back filling behind abutment, wing wall and return wall with granular material including all cost, carriage, royality and labour as per specification and direction of the Engineer in Charge. Granular Material
111Providing 600mm thick filter media in the rear of abutment and wing walls with 5cm size and down graded hand broken granite metal of approved quality from approved quarry as per specification and direction of the Engineer in charge including cost, conveyance royalty and taxes of all materials TandP articles required for the work etc. complete.
112Providing fitting and fixing expansion joints with M.S. Angles 75mm. X 75 mm. X 6 mm. at the edges of the slab with suitable anchoring arrangements by 12mm. M.S. Bars as per MOST design and drawing including fitting, fixing and welding with 6 mm. plates and filling joints of wearing coat with bitumen joint filler 12 mm. thick and joint sealing compound at top including painting of exposed surface of M.S. covered plates with anticorrosive bitumanstic paint etc. with cost, conveyance taxes of all materials labour and TandP etc. complete in all respects as per specification and direction of the Engineer in Charge.
113Random rubble hard granite stone masonry in clay or sand or gravel grouted in foundation and plinth Per 1 cum.
114Providing and applying two coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescense and applying paint at the rate 1 litre per 02 Sqm etc complete as per derection of Engineer in charge.
115Providing , fitting, fixing tar papers including all cost, carriage etc complete Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58582138
AUTHORITY Government Departments
TENDER VALUE 5.73 Crore
LAST DATE 01-12-2026
Authority
Authority Name Rural Works Department
Work Description Tender for Construction Of Road From Sodhapali To Haldi Road Via Sodhapali Kata, Halditikira
Basic Detail
Tender No ONLINE-RWCSBP-30/2026-27
Bidding Type Tender
Location
City Bargarh
State Odisha
Key Dates
Publish Date 18 Nov 2026
Submission Date 01 Dec 2026
Open Date 02 Dec 2026
Finance
Tender Value 5.73 Crore
Tender Fee 10000
EMD 5.73 Lakhs
Exemption Available
Document List
940c535e-bfb8-4cb2-b712-6c4c3c1f8c47.html
BOQ_622016.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 01, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 9 days
Dec 02, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 10 days

Tender Documents

Download All (ZIP) ↓
html

940c535e-bfb8-4cb2-b712-6c4c3c1f8c47.html

xls

BOQ_622016.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender