Housing Urban and Rular Development Government Departments Closing in 2 days TDR #58582125

Tender For General-Pmg Area - Running 2Nd Half 2026-Rmc Works For Bartton Hill Eng. Collage, Farm Information Bureau, Scouts And Guides,Stationary,Labour Complex, Information Commission, Riltc Hindi Office Buildings Under Cliff House Section-General

Issued by Government Departments · Thiruvananthapuram, Kerala
Tender Value
2.54 Lakhs
Estimated cost
Bid Submission
24 Nov 2026
2 days left
EMD
6353
Bank guarantee accepted
Document Fee
560
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvananthapuram → Kerala
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for General-Pmg Area - Running 2Nd Half 2026-Rmc Works For Bartton Hill Eng. Collage, Farm Information Bureau, Scouts And Guides,Stationary,Labour Complex, Information Commission, Riltc Hindi Office Buildings Under Cliff House Section-General Civil Work

BOQ

Name of Work:- GENERAL-PMG area - Running 2nd half 2026-RMC works for Bartton hill Eng. Collage, Farm Information Bureau, Scouts and Guides,Stationary,Labour Complex, Information Commission, RILTC Hindi Office buildings under Cliff House Section-General Civil Work
Sl. No. Item Description
1Estimate
22.32:Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
32.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
44.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
515.60:Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved
69.82:Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
79.83:Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
89.100.1:Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm
910.25.2:Item Shifted to Sub head 14 as item 14.73Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
1012.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
1114.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)
1214.72:Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story hight made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staricase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done .
1317.18.1:Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete.10 litre capacity - White
1417.20.1:Providing and fixing solid plastic Seat with lid for pedestal type W.C. pan complete:White solid plastic seat with lid
1517.28.1.1:Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC.waste fittings complete.Semi rigid pipe32 mm dia
1617.28.2.1:Flexible pipe32 mm dia
1717.32.2:Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm
1818.51.1:Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore
1918.49.1:Providing and fixing C.P brass bib cock of approved quality conforming to IS: 8931.15 mm nominal bore
2018.18.2:Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:20 mm nominal bore
2118.58.2.1:Providing and fixing PTMT grating of approved quality and colour.Rectangular type with openable circular lid150 mm nominal size square 100 mm diameter of the inner hinged round grating
2250.18.9.12.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20 mm dia 10Kgf/cm2 External work- Exposed on wall
2350.18.9.19.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall
2450.18.9.2.2:Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 20 mm dia 10 Kgf/cm2
2550.18.9.6.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 10Kgf/cm2
2650.18.9.3.2:Providing and fixing PVC pipes includes jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm dia 10KGF/cm2
27OD166011/2026-2027:Cutting branches of trees overhanging above any structures of girth below 30 cm including stacking of serviceable materials , cost of labour, hire charges of rope and pulley etc
2850.2.33.5:Cutting branches of trees overhanging above any structures of girth between 40cm to 60cm including stacking of serviceable materials and disposal of unserviceable material, cost of labour, hire charges of rope and pully etc without making any damages to nearby structures etc complete.
2950.2.33.6:Cutting branches of trees overhanging above any structures of girth between 60cm to 90cm including stacking of serviceable materials and disposal of unserviceable material, cost of labour, hire charges of rope and pully etc without making any damages to nearby structures etc complete
3050.2.33.7:Cutting branches of trees overhanging above any structures of girth between 90cm to 120cm including stacking of serviceable materials and disposal of unserviceable material, cost of labour, hire charges of rope and pully etc without making any damages to nearby structures etc complete.
3150.2.33.8:Cutting branches of trees overhanging above any structures of girth beyond 120cm including stacking of serviceable materials and disposal of unserviceable material, cost of labour, hire charges of rope and pully etc without making any damages to nearby structures etc complete.
32OD166007/2026-2027:Removing and readjusting MP hip and ridge tiles departmental/ supplied etc. complete as per the direction from the Engineer
33OD166003/2026-2027:Removing and readjusting with PWD roofing tiles of departmental or supplied tiles etc. complete as per the direction of Engineer in charges
34OD166006/2026-2027:Supplying PWD pattern roofing tiles including all conveyance
35OD166004/2026-2027:Supplying mangalore roofing tiles including all conveyance
36OD166009/2026-2027:Removing and readjusting with MP roofing tiles of department of supplied etc. complete as per direction from Engineer.
37OD166014/2026-2027:Supplying mangalore hip and ridge tiles including cost of materials conveyance etc. complete
38OD166002/2026-2027:Cleaning the blocked up and not working sewer manhole of size 60x60 cm having height up to 150cm or nearest including disposal of black earth
39OD166012/2026-2027:Cleaning filled up silt pit up to 50cm depth etc complete
40OD166013/2026-2027:Labour engaged for attending the petty repairs of water supply and sanitary works
41OD166008/2026-2027:Labour engaged for assist the fitter carpenter and cleaning the roof top and surroundings etc.complete
42OD166005/2026-2027:Labour engaged for attending petty repairs of Door and Windows
43OD166010/2026-2027:Labour engaged for cleaning and removing the surplus earth, waste materials in convenient place etc.complete Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58582125
AUTHORITY Government Departments
TENDER VALUE 2.54 Lakhs
LAST DATE 24-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for General-Pmg Area - Running 2Nd Half 2026-Rmc Works For Bartton Hill Eng. Collage, Farm Information Bureau, Scouts And Guides,Stationary,Labour Complex, Information Commission, Riltc Hindi Office Buildings Under Cliff House Section-General Civil Work
Basic Detail
Tender No E50 PWD BLDG TR 16929 2026 5 1 1 1
Bidding Type Tender
Location
City Thiruvananthapuram
State Kerala
Key Dates
Publish Date 18 Nov 2026
Submission Date 24 Nov 2026
Open Date 25 Nov 2026
Finance
Tender Value 2.54 Lakhs
Tender Fee 560
EMD 6353
Exemption Available
Document List
BOQ_1521089.xls
Declaration.pdf
fbe8287c-ca44-40be-bbe8-bf7ac323b2ad.html
form_of_tender.pdf
integrity_pact.pdf
PreliminaryAgreement.pdf
SBD.pdf
TenderDocuments.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 24, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Nov 25, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 3 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_1521089.xls

pdf

Declaration.pdf

html

fbe8287c-ca44-40be-bbe8-bf7ac323b2ad.html

pdf

form_of_tender.pdf

pdf

integrity_pact.pdf

pdf

PreliminaryAgreement.pdf

pdf

SBD.pdf

pdf

TenderDocuments.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender