Housing Urban and Rular Development Government Departments Closing in 10 days TDR #58581797

Tender For Construction Of H.L. Bridge Over Local Nallah At Ch. 8/430 Km On Totaguda Junction To Ladiguda Junction Road In The District Of Rayagada

Issued by Government Departments · Rayagada, Odisha
Tender Value
5.64 Crore
Estimated cost
Bid Submission
03 Dec 2026
10 days left
EMD
5.65 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Rayagada → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of H.L. Bridge Over Local Nallah At Ch. 8/430 Km On Totaguda Junction To Ladiguda Junction Road In The District Of Rayagada

BOQ

Name of Work:- Construction of H.L. Bridge over Local Nallah at Ch. 8/430 Km on Totaguda Junction to Ladiguda Junction road in the District of Rayagada
Sl. No. Item Description
1Clearing and grubbing road land including uprooting rank vegetation, grass,bushes, shrubs, saplings and tree girth upto 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned upto a lead of 1000 meters including removal and disposal of top organic Soil notexceeding 150mm in thickness as per clause 201 of MORT&H Spesifications for Road & Bridge works including cost, conveyance, royalty and taxes of all materials, all labour with T&P required for the work etc. complete as per technical specification and direction of Engineer-in-Charge.
2Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading and compacting to meet requirement of table 300 2 including cost, conveyance royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Clause 305 of MoRT&H Specifications for Road & Bridge workscomplete as per technical specification and direction of Engineer in Charge.
3Excavation for road work in soil with hydraulic excavator of 0.9 cum bucker capacity including cutting, trimming bottom & side slopes and transporting to the embankment locations upto 1000m lead with cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Clause 301 & 304 of MoRT&H Specifications for RoadandBridge works (5th Revision).
4Providing filling sand well watered and rammed including cost, conveyance, royalty and taxes of all materials, all labour with T&P required for the work etc. complete as per technical specification and direction of Engineer in Charge.
5Bored cast-in-situ M-35 grade R.C.C. Pile 1000mm dia excluding Reinforcement complete as per Drawing and Technical Specifications and removal of excavated earth with all lifts and lead upto 1000 m .including cost, conveyance, royalty and taxes of all materials, all labour with T&P required for the work etc. complete as per technical specification and direction of Engineer in Charge.
6Supplying fitting fixing and placing in position Steel liner of 6 mm to 10mm thick for curbs and stainning of wells as per approved Drawing & Technical Specifications and Section 1200 of MoRT&H Specifications for Road & Bridge works .
7PCC M 15 Grade in Foundation bed using 40 to 10mm size crushed stone aggregates mixed by Concrete mixer, laying in layers and compacting by vibrator including cost, conveyance, royality of all materials & cost of all labour machinery etc complete as per approved Drawing & Technical Specifications and Section 1700 & 2100 of MoRT&H Specifications for Road & Bridge works.In Foundation
8PCC M-15 Grade in Foundation and Substructure using 40 to 10mm size crushed stone aggregates mixed by Concrete mixer, laying in layers and compacting by vibrator including cost conveyance royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1700 & 2100 of MoRT&H Specifications for Road & Bridge works.In Substructure
9RCC M-35 Grade in Foundation (Pile Cap) using 20 to 10mm size crushed stone aggregates mixed by Batching plant, laying in layers and compacting including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1500,1700 & 2100 of MoRT&H Specifications for Road & Bridge work complete as per technical specification and direction of Engineer in Charge.In Foundation
10RCC M-30 Grade in Substructure Abutment Shaft using 20 to 10mm size crushed stone aggregates mixed by Batching plant, laying in layers and compacting including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1500,1700 & 2100 of MoRT&H Specifications for Road & Bridge work complete as per technical specification and direction of Engineer in Charge.In Substructure
11RCC M-30 Grade in Substructure in Return Wall and Wing Wall using 20 to 10mm size crushed stone aggregates mixed by Batching plant, laying in layers and compacting including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1500,1700 & 2100 of MoRT&H Specifications for Road & Bridge work complete as per technical specification and direction of Engineer-in-Charge.
12RCC M-30 Grade in Substructure in Abutment Pier Cap using 20 to 10mm size crushed stone aggregates mixed by Batching plant, laying in layers and compacting including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1500,1700 & 2100 of MoRT&H Specifications for Road & Bridge work complete as per technical specification and direction of Engineer in Charge.
13RCC M-30 Grade in Substructure in Dirt Wall using 20 to 10mm size crushed stone aggregates mixed by Batching plant, laying in layers and compacting including cost conveyance royality of all materials & cost of all labour machinery etc complete as per approved Drawing & Technical Specifications and Section 1500 1700 & 2100 of MoRT&H Specifications for Road & Bridge work complete as per technical specification and direction of Engineer-in-Charge.
14RCC M-40 Grade in Substructure Bearing Pedestal M 40 using 20 to 10mm size crushed stone aggregates mixed by Batching plant, laying in layers and compacting including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1500,1700 & 2100 of MoRT&H Specifications for Road & Bridge work complete as per technical specification and direction of Engineer in Charge.
15Supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to IRC: 83 (Part-II) section IX and clause 2005 of MoRTH specifications complete including all accessories as per drawing and Technical Specifications.
16RCC M-30 Grade in Girders using 20 to 10mm size crushed stone aggregates mixed by Batching plant, laying in layers and compacting including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1500,1700 & 2100 of MoRT&H Specifications for Road & Bridge work complete as per technical specification and direction of Engineer in Charge.
17Steel reinforcement works in structure & Retaining wall work using HYSD (uncoated reinforcement bars of Fe-500 gr.) including cost, conveyance of all materials with cost of all labour etc complete as per approved Drawing & Technical Specifications and Section -1600 of MoRT&H Specifications for Road & Bridge works, including cost, conveyance, royalty and taxes of all materials, all labour with T&P required for the work etc. complete as per technical specification and direction of Engineer in Charge.Reinforcement in foundation in retaining wall
18Providing and laying 25mm thick mastic asphaltic wearing course with paving grade bitumen meeting the requirements given in table 500-39, prepared by using mastic cooker and laid to requirement level and slope after cleaning the surface , including providing antiskid surface with bitumen precoated fine grained hard stone chipping of 13.2mm nominal size at the rate of 0.005cum per 10 sqm and at an approximate spacing of 10cm centre to centre in both directions, pressed into surface when the temperature of surfaces is not less than 1000c, protuding 1 to 4mm over mastic surface, all complete as per clause 516.
19Providing and laying Bituminous Concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder 5.4 to 5.6 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects
20Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturers instructions for installation etc complete as per MoRT&H Specifications for Road & Bridge works complete as per technical specification and direction of Engineer-in-Charge.
21Providing & fixing in position RCC Crash barrier monolithic with slab M40 grade of 950mm height above slab including cost conveyance royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1500 1600 2300 & Clause- 2703 of MoRT&H Specifications for Road & Bridge works (5th Revision)
22Supplying & fixing Steel pipe & supporting plate over crash barrier using 50mm NB MS medium pipe with 8mm thick MS plate vertical and 122mm thick base plate 1500mm c/c in position as per approved drawing and technical specifications Clause 808 of MoRT&H Specifications for Road & Bridge works (5th Revision).
23Supplying, fabricating welded water tight drainage spout in deck slab as per technical specification clause 2700 of specification road and bridge work MORT&H (5th revision) assembly to dimensions shown on drawing of dia not less than 100mm with galvanized steel conforming to IS 226 & fixing in position with suitable fixtures at specified locations on bridge decks including painting two coats with bituminous paint sealed with sealant as per IS 1834 around the spout to the deck slab including full compensation to all operations, all inclusive costs, contigencies, incidental involved for the finished defect free item of work complete to specificaton & as directed by engineer in charge.
24RCC M-30 grade in Approach slab including steel of CD work with formwork using 20 to 10mm size crushed stone aggregates mixed by concrete mixer, laying with all leads and lifts & compacting as per approved Drawing & Technical Specifications and Section -1600, 1700 & 2700 of MoRT&H Specifications for Road & Bridge works (5th Revision).
25P.C.C.M-25 Grade in Substructure of CD work using 40mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts including frame works etc as per approved Drawing & Technical Specifications and as per Section -1500 1700 2100 & 2200 of MoSRT&H Specifications for Road & Bridge works (Latest Revision).
26Painting two coats with enamel paints over a coat of primer in road kerb & post of approved shade for finished item of work as per the direction of the Engineer-in-charge.
27Gravel backing to approns and revetments with good quality moorum/sand and moorum admixture satisfying Liquid limit below 25 and P.I.value within 6 as per approved drawing with cost,conveyance royalty taxes of all materials all labours, T&P sundries complete as per specification and direction of Engineer-in-Charge.
28Rough stone dry packing on Aprons and Revetments with hard granite stone of above.003 cum including cost conveyance royality of all materials and labour charges etc.complete as per direction of Engineer In Charge.
29Providing & laying Filter Media with crushed stone aggregates of 45mm size satisfying requirements including cost, conveyance, royality of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause -710.1.4 of IRC 78 & Clause - 2504.2 of MoRT&H Specifications for Road & Bridge works works complete as per technical specification and direction of Engineer-in-Charge.
30Providing Weep Holes of 100mm dia using A.C PVC pipe, fixing with cement mortar including cost, conveyance, royality of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause 2706 & 2200 of MoRT&H Specifications for Road & Bridge works complete as per technical specification and direction of Engineer in Charge.
31Back filling behind abutment, wing wall and return wall complete as per drawing and Technical Specification section 2200, IRC-78 and instruction of Engineer in charge.
32Providing compacted granular materials in shoulder by using moorum having required P.I. value with sand admixture if required as per approved Drawing & Technical Specifications and as per Clause - 407 of MoSRT&H Specifications for Road & Bridge works (Latest Revision).
33Providing GSB Gr vi materials, spreading in uniform layers with motor grader, mixing by mix in place method at OMC and compacting with vibratory roller to achieve the desired density including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Clause 401 of MoRT&H Specifications for Road & Bridge works including cost, conveyance, royalty and taxes of all materials, all labour with T&P required for the work etc. complete as per technical specification and direction of Engineer in Charge.
34Providing, laying, spreading & compacting graded stone aggregate to wet mix macadam specification including premixing the material at OMC in mechanical mix plant, carriage of mixed material to site, laying in uniform layers on well prepared surface & compacting to achieve the desired density including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Clause -406 of MoRT&H Specifications for Road & Bridge works, including cost, conveyance, royalty and taxes of all materials, all labour with T&P required for the work etc. complete as per technical specification and direction of Engineer in Charge.
35Providing Primer Coat with bitumen emulsion on prepared granular surface, spreading 0.60kg sqm using mechanical means including cost, conveyance of of bitumen emulsion & cost of all labour, machinery etc complete as & cost of all labour, machinery etc complete as per Technical Specifications and Clause -501 & 502 of MoRT&H Specifications for Road & Bridge works complete as per technical specification and direction of Engineer in Charge.
36Providing and Applying Tack coat with bitumen emulsion 0.20 kg of bitumen per sqm. on the prepared bituminous granular surface including scraping and cleaning the road surface as per clause 503 of MoRT&H specification for Road & Bridge works , including hire and running charges of all machineries, including cost, conveyance, royalty and taxes of all materials, all labour with T&P required for the work etc. complete as per technical specification and direction of Engineer-in-Charge.
37Providing 50mm thick Bituminous Macadam using crushed stone Gr.-2 materials & 60 70 penetration grade of bitumen as per approved Drawing & Technical Specifications and as per Clause -504 of MoSRT&H Specifications for Road & Bridge works (Latest Revision).
38Providing 25mm thick S.D.B.C. using crushed stone Gr.-2 materials & 60 70 penetration grade of bitumen as per approved Drawing & Technical Specifications and as per Clause -508 of MoSRT&H Specifications for Road & Bridge works (Latest Revision).
39Providing, fixing retroreflectorised, cautionary, mandatory & informatory sign as per IRC-67 made of high intensity gr. aluminium sheeting 1.5mm thick supported on MS circular pipe 65 NB firmly fixed to the ground by means of PCC M25 grade foundation of 45cm x 45cm x 60cm, 60cm below ground level as per drawing and Clause 801 of MoRT&H Specifications for Road & Bridge works etc. complete as per technical specification and direction of Engineer-in-Charge.90cm Equilateral
4060cm Circular
4180 cm x 60 cm rectangular
4290cm High Octagon
43Providing and laying of hot applied Thermoplastic compound 2.5 mm thick including reflectorising glass beads 250 gms per sqm, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes as per Technical Specifications and Section- 800, 1600 & 1700 of MoRT&H Specifications for Road & Bridge works etc. complete as per technical specification and direction of Engineer-in-Charge.
44Providing and erecting a \\"W\\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 of MoRT&H Specifications for Road & Bridge works etc. complete as per technical specification and direction of Engineer-in-Charge.
45Supplying and fixing 15cm dia 1.00m long Guard posts of R.C.C.m-15 using 7.5Kg of steel for each guard post with 12mm size Black hard granite stone chips including cost of all renforcement & materials centering & shuttering & watering curing etc. complete. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58581797
AUTHORITY Government Departments
TENDER VALUE 5.64 Crore
LAST DATE 03-12-2026
Authority
Authority Name Road And Building Department
Work Description Tender for Construction Of H.L. Bridge Over Local Nallah At Ch. 8/430 Km On Totaguda Junction To Ladiguda Junction Road In The District Of Rayagada
Basic Detail
Tender No CCE 07/2026-27
Bidding Type Tender
Location
City Rayagada
State Odisha
Key Dates
Publish Date 18 Nov 2026
Submission Date 03 Dec 2026
Open Date 04 Dec 2026
Finance
Tender Value 5.64 Crore
Tender Fee 10000
EMD 5.65 Lakhs
Exemption Available
Document List
bc6045ac-38af-4266-b262-cb1962d2f167.html
BOQ_621878.xls
Tendernotice_1.pdf
Tendernotice_2.pdf
Tendernotice_3.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 03, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Dec 04, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 11 days

Tender Documents

Download All (ZIP) ↓
html

bc6045ac-38af-4266-b262-cb1962d2f167.html

xls

BOQ_621878.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

pdf

Tendernotice_3.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender