Tender For Maintenance And Repair Of Paithan To Gevrai Pump House, Bpt And Pipeline Mc Georai.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
26 Nov 2026
7 days left
EMD
20000
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Beed → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance And Repair Of Paithan To Gevrai Pump House, Bpt And Pipeline Mc Georai.
BOQ
| Sl. No. | Item Description |
| 1 | Repairing of leakage on existing 400 mm dia D.I. (Ductile Iron) pipeline, including excavation, exposing the pipe, dismantling the damaged joint, providing and fixing necessary D.I. jointing materials / repair clamp, refitting, testing for leakage, refilling the excavated portion and all labour, tools and tackles complete as directed by the Engineer-in-Charge. D.I. fittings with ISI mark Mechanical joint confirming to tables 12 to table 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM gaskets, Nuts, Bolts, Washers and Ductile iron follower glands. Fittings should be with internally Ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation and excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete.With Two DI joint |
| 2 | Repairing of leakage on existing 400 mm dia D.I. (Ductile Iron) pipeline, including excavation, exposing the pipe, dismantling the damaged joint, providing and fixing necessary D.I. jointing materials / repair clamp, refitting, testing for leakage, refilling the excavated portion and all labour, tools and tackles complete as directed by the Engineer-in-Charge. D.I. fittings with ISI mark Mechanical joint confirming to tables 12 to table 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM gaskets, Nuts, Bolts, Washers and Ductile iron follower glands. Fittings should be with internally Ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation and excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete.With One DI joint |
| 3 | Repairing of leakage on existing 450 mm dia D.I. (Ductile Iron) pipeline, including excavation, exposing the pipe, dismantling the damaged joint, providing and fixing necessary D.I. jointing materials / repair clamp, refitting, testing for leakage, refilling the excavated portion and all labour, tools and tackles complete as directed by the Engineer-in-Charge. D.I. fittings with ISI mark Mechanical joint confirming to tables 12 to table 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM gaskets, Nuts, Bolts, Washers and Ductile iron follower glands. Fittings should be with internally Ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation and excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete.With Two DI joint |
| 4 | Repairing of leakage on existing 450 mm dia D.I. (Ductile Iron) pipeline, including excavation, exposing the pipe, dismantling the damaged joint, providing and fixing necessary D.I. jointing materials / repair clamp, refitting, testing for leakage, refilling the excavated portion and all labour, tools and tackles complete as directed by the Engineer-in-Charge. D.I. fittings with ISI mark Mechanical joint confirming to tables 12 to table 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM gaskets, Nuts, Bolts, Washers and Ductile iron follower glands. Fittings should be with internally Ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation and excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete.With One DI joint |
| 5 | Providing and supplying at site ductile iron /Spheroidal Graphite (S.G.) iron single /Double chamber tamper proof air valve without isolating sluice valve. Valves in accordance with BSEN 1074-4 of PN 10/16 rated, with body and bonnet of ductile iron confirming to EN 1563/IS 1865 Gr. 500/7 or Gr.400/15 floats, float guide, seat ring of stainless steel 1.4436/1.4306, seat ring gasket of WRAS approved EPDM rubber (suitable for drinking water), internal fasteners of stainless steel A2. Body & Bonnet coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) as per DIN 30677-2 & GSK guidelines with a coating thickness of min. 250 microns. Flange connections as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 14845. including transportation charges excluding GST levied by GOI & GOM in all respect etc. complete. (For PN 10 & 16) PN 1.6 100mm Dia |
| 6 | Rent for Concrete breaker & Compressor |
| 7 | Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel andsoft murum, including removing theexcavated material upto a distance of 50metres and lifts as below, stacking andspreading as directed, normal dewatering,preparing the bed for foundation andexcluding backfilling, etc. complete. (Bd-A1/259) |
| 8 | Excavation for foundation / pipe trenches inhard murum including removing theexcavated material upto a distance of 50 Mand lifts as below, stacking and spreadingas directed by Engineer-in-charge, normaldewatering, preparing the bed forfoundation and excluding backfilling, etc.complete. (Bd-A-2/259) |
| 9 | Refilling the trenches with availableexcavated stuff with soft material first overpipeline and then hard material in 15 cmlayers with all leads and lifts includingconsolidation, surcharging, etc. complete. |
| 10 | Lowering, laying in position to correct line and level including M. S. pipes with / without any outcoating on pedestals or chairs upon prepared formation. The rate to include loading, unloading, hoisting, marginal cutting wherever required, assembling and tack welding, and transportation upto 500 M. etc. completed as specifie Above 250 mm. Upto 500 mm. dia. |
| 11 | Providing steel bar reinforcement for pipe encasing, thrust block, pile foundation, pile cap, and pedestal as per IS: 1786 High Yield Strength Deformed Bars etc. complete.as per specifications etc complete as directed by Engineer-In- Charge. |
| 12 | Pipe Encasing and thrust blocks for the pipeline by encasing the pipe with RCC 1:2:4 including all material, labour, mechanical mixing, compaction, curing etc. complete as directed by Engineer in-charge |
| 13 | RATES FOR ROAD AND RAILWAY CROSSING BY PUSH THROUGH METHODPushing of M.S. pipe of following dia for road crossing and Railway crossing by push through method in all types of strata by using hydraulic jack and drilling machine of required diameter, below 3.0 m depth including lowering, laying, jointing of M.S.casing pipe including cost of all labour, fuel and material,required welding machinery,tripod, chain pulley block,crane , blower etc.,transportation and Dewatering etc.complete as directed by Engineer-in-charge but excluding cost of M.S. Pipes. 500 mm dia to 1000 mm dia M.S.pipe |
| 14 | Providing & Supplying ISI Standard D.I. Specials & Fittings with sealing rubber gasket of S.B.R. complete with cast iron follower gland & M.S. nut bolts coated or otherwise protected from rusting and suitable for D.I. Pipes including coat of labour, material and transportation to stores /site loading, unloading including all taxes etc. complete as per IS 9523 (above 350 mm) |
| 15 | Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside including all taxes (Central and local), octroi, inspection charges, transportation to stores / site, and stacking, etc. complete.Only flanges with machining and drilling holes, etc. complete more than 40 mm thick |
| 16 | Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside including all taxes (Central and local), octroi, inspection charges, transportation to stores / site, and stacking, etc. complete.Only flanges with machining and drilling holes, etc. All type of specials of all diameters |
| 17 | Providing and supplying at site of ductile iron/spheroidal graphite (S.G.) iron D/F non -rising spindle resilient seated glandless sluice valves with handwheel & without bypass arrangement.Valves in accordance with BS 5163 of PN-10/16 rated,with body and bonnet of ductile iron confirming to IS 1865 Gr. 500/7 or Gr.400/15.Wedge fully encapsulated WRAS approved EPDM rubber (approved for drinking water), Wedge nut of brass,shaft of stainless steel 1.4021/1.4104, stem seals min 3 nos.of NBR,internal fasteners of stainless steel A2.Body & Bonnet coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) as per DIN 30677-2 & GSK guidelines with a coating thickness of min.250 microns.Valves should be full bore &tight shut-off.Flange drilling as per IS 1538 raised face & presuure testing at manufactures works shall be done as per IS 14846. Including all taxes and transportation charges etc.complete |
| 18 | 400 mm dia |
| 19 | 200 mm dia |
| 20 | 450 mm dia |
| 21 | Welding in all positions with required number of runs, for M.S. pipes internally and/or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification. |
| 22 | Gas cutting (either square cut or v cut) pipes, plates, etc. of thickness. 8mm |
| 23 | Providing and applying of elastomeric (450% elongation), thermoplastic, fire retardant, coating skin tensile strength 18 to 21 kg/cm2, antifungal, antibacterial anticorrosive, graft co-polymer Coating on internal surface of pipe lines. 100 Micron DFT of site bonding grade with steel surface and 100 Micron DFT of top coat. . Pipe in unlaid condition, factory epoxy coating with field coating at joint |
| 24 | Providing and applying of elastomeric (450% elongation), thermoplastic, fire retardant, coating skin tencile strength 18 to 21 kg/cm2, antifungal, antibacterial anticorrosive, graft co-polymer Coating on external pipe lines in un laid/laid condition after proper cleaning. 50 Micron DFT of self bonding grade with metal surface, 50 Micron DFT inner coat and 50 Micron DFT of top coat. Pipe in unlaid condition, factory epoxy coating with field coating at joint Pipe in unlaid condition, factory epoxy coating with field coating at joint Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender