Tender For Providing And Installation Of Deep Bore Well With Provision For Energization And Submersible Motor Pump Set At Herbal Garden In Village : Jungle Jhalera, Po : Binola, Tehsil : Sadar, Distt. Bilaspur (Hp).
Tender Value
3.29 Lakhs
Estimated cost
Bid Submission
02 Dec 2026
13 days left
EMD
9400
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bilaspur → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing And Installation Of Deep Bore Well With Provision For Energization And Submersible Motor Pump Set At Herbal Garden In Village : Jungle Jhalera, Po : Binola, Tehsil : Sadar, Distt. Bilaspur (Hp).
BOQ
| Sl. No. | Item Description |
| 1 | Transportation of suitable truck/tractor mounted DTH/ODEX attached / Percussion Calyx/ Rotary drilling tractor rigs along with necessary accessories etc. to the site of work and erection of rig including levelling etc. complete in all respect as per the direction of Engineer-in -charge. |
| 2 | Drilling bore of 152mm dia as per IS 2800:1979(IS 2800 (Part-1) off road & on road(both):1991 Re-affirmed 2001) using DTH with ODEX attachment rig drilling in collapsible strata conglomerate comprising of boulders,pebbles,gravels, sand,silt,clay,etc. including cost of attachments consumable stores, bits, water,POL,etc.complete with system of simultaneous lowering of 125mm nominal bore, 5mm thick MSERW fin cut casting pipe which will be welded together using 2.5mm or 3.25mm dia. Advani/oerlikon electrodes with one plain end the other end chamfered to 50 degress including removing paint on the area to be welded,including of the cost of bio-degradable and non toxic-foam flush etc. complete in all respect.(MSERW fin cut casting shoe & bit tube as per requirement of ODEX to be paid seprarately.)as per directions of Engineer in charge. |
| 3 | Supplying and lowering of IS marked 125mm nominal bores-5.00 mm thick fincut MSERW casing pipes as per IS 4270-2001 dully zinc coated as per BIS:4736 with upto date amendment and requirement Of ODEX attachment from approved manufacturers complete in all respect as per the direction of Engineer-in -charge. |
| 4 | Slotted pipe |
| 5 | Providing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respect as per the direction of Engineer -in -charge |
| 6 | Collection and preservation of soil samples in polythene bags complete in all respects as per direction of Engineer -in -charge |
| 7 | Development of bore well and yield testing with Air compressor through 90 degree v- notch and disinfection etc. complete in all respect as per IS-2800-1979 and as per direction of the Engineer -in -charge . |
| 8 | Construction of plate form as per approved design/drawing of department 1.80 mtr dia.with pucca drain for waste water having size of drain 1000*300*100mm with cement concrete 1:2:4 (100mm thick in bed and 100mm thick in sides of drain/plateform with stone soling 150mm thick and providing under layer for plate form with stone soling 150mm thick and providing RCC smoooth finishing in cement mortar 1;3 including the cost of excavation and form work curing complete in all leads and lifts and to the entire satisfaction of the Engineer-in-charge. |
| 9 | Providing,laying,jointing & testing and lowering in bore IS marked Delievery pipe of Polyvinyl-chloride (PVC) Pipe 32mm outer dia |
| 10 | Pumping Machinery and Energization (Single Phase) |
| 11 | Providing,lowering and Testing of Pumping Machinery 2.0HP submersible motor pump set suitable for 90m head. |
| 12 | Supply and fixing submersible 3-core cable 4.00 mm2 (ISI) marked |
| 13 | Single Phase Control Panel(Starter) with Ampmeter, voltmeter,indicator set etc.complete in all respect and to entire satisfaction of Engineer -in -Charge |
| 14 | Supply and fixing rope with 6mm2 dia suitable to wear the weight of submersible motor pumps set and GI pipe etc. including in all leads and lifts Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysDec 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender