Tender For Repair To Head Regulator Gate Of Lbc And Reconstruction Of Hpc At Rd 900 M Of Kosambi Ex.Mal.Tank
Tender Value
19.93 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
5 days left
EMD
20000
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandrapur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Head Regulator Gate Of Lbc And Reconstruction Of Hpc At Rd 900 M Of Kosambi Ex.Mal.Tank
BOQ
| Sl. No. | Item Description |
| 1 | Item No.1:- Dismantling the Stone Masonry in cement mortar including stacking the material with all lifts etc.complete as directed. |
| 2 | Item No. 2 :-Excavation in Hard Murum including boulders up to 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drain / catch water drains etc., and placing the excavated material neatly in dump area or for formation of service road as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc., complete lead up to 1 km and all lifts as directed . |
| 3 | Item No 3:- Excavation in soft rock including boulders upto 0.6m diameter ( 0.113 cum) for canal, seating of embankment, filter drain/catch water drains etc.,and placing the excavated soft rock neatly in dump area or for formation of service road including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc.complete with lead upto 1 km and all lifts as directed. |
| 4 | Item No. 4 :- Providing and laying rubble soling below foundation in layers including filling with rubble chips, murum etc. complete as directed. |
| 5 | Item No.5 :-Providing and laying in situ cement concrete of grade M-10 of trap/ granite / quartzite / graded metal for foundation and bedding with Batching Plant and Transit Mixer including placing, compacting, curing etc. complete with all lifts as directed. |
| 6 | Item No. 6 :-Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss /quartzite / graded metal for foundation and bedding by Batching Plant & Transit Mixer including centering,shuttering, scaffolding, placing, compacting, curing etc. complete with all lifts as directed. |
| 7 | Item No. 7 :- Providing and laying in situ cement concrete of grade M-20 of trap / granite / gneiss / quartzite / graded metal for RCC works of gallery, sluice, spillway crest, spillway down stream face, energy dissipating structures, intake structures, training walls, piers, abutments, slab etc. with Batching Plant and Transit mixer including centering, shuttering ,scaffolding, compacting, curing etc. complete with all lifts etc. complete as directed. |
| 8 | Item No 8 : Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete as directed. |
| 9 | Item No.9 :-Providing RCC concrete pipes of I.S.NP.class of 450 mm diameter inproper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. |
| 10 | Item no. 10:- Providing R.C.C. pipe of NP2 class conforming to IS 458 2003 of following diameter including cost of all material and labour required, inspection charges, transportation to stores, transit insurance, loading, unloading and stacking excluding GST levied by GOI and GOM in all respect etc. complete as directed. |
| 11 | Item No.11 :- Laying and jointing R.C.C. pipe of NP2 class or IRC standard in C.M. 1:2, proportion by volume including cost of all materials (excluding pipes and collars), labour, aligning pipes, batching and mixing mortar, packing joints with hemp and mortar, finishing, curing etc. complete with all lifts as directed |
| 12 | Item No. 12 :- Back filling up to ground level behind the canal structures etc. complete with suitable material of approved quality in layers not exceeding 20 cm without disturbing the structure etc. complete as directed. |
| 13 | Item No. 13 :Manufacturing with QAP, fabrication, erection,commissioning & testing with 125 % of rated capacity of Screw stem hoist consisting of Screwstem, Nut, Gear Pinion, Worm wheel, Shaft, Keys etc. All material used shall conformed to IS Codesspecified in IS 11228.Mild steel confirming to IS 2062. Other Material includes C.S. (IS1030), P.Bronze (IS 305), Welding electrodes (AWS E6013 for general weld joints & E7018 for X ray qualityweld joints).The tolerances between Components & assembly Shall confirm to IS 4623.the fits andtolerances between the bronze bushing & hub shall be H7r6 (Interference fit) & with pin shall beH7f7 (Clearance fit) and for antifriction bearings with hub shall be H7 (Interference) & antifrictionbearing with pin shall be r6 (Interference ) as per IS 4623. It includes all materials, Labour charges,machining and machinery charges, 1km lead charges of transportation, loading and unloadingcharges of Gate parts at Site, Inspection & Quality control charges, Sand blasting, Painting with onecoat of Zinc rich primer on dry film to give total dry film thickness 70 +/- 5 microns and 2 coats ofsloventless coal tar epoxy paint applied to give minimum dry film thickness of 150+/- 5 micron percoat as per IS 14177. |
| 14 | Item No. 14 :-Excavation in all kinds of soil including boulders up to 0.6 m diameter ( 0.113 cum) for canal, seating of embankment, filter drains / catch water drains etc., and placing the excavated stuff neatly in dump area or for formation of service road / embankment including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc. Complete with lead up to 1 km and all lifts as directed. |
| 15 | Item No.15 :- Providing hearting embankment using selected impervious material available directly from excavation in layers including cost of all materials, machinery, labour, all other operations such as collection of material,spreading soil in layer of specified thickness,sorting out, breaking clods, levelling, sectioning edges / sides, watering, compacting each layerto density control of not less than 95% of Proctordensity using vibratory compactor includingcost of water etc.complete with lead upto1 kmfor water and all lifts as directed. |
| 16 | Item No.16 :- Dewatering by pumping out water collected with Diesel or Electrical pumps including cost of all materials, machinery, labour, providing sump and all other ancillary operations whenever necessary etc. complete under specific and indispensable circumstances with prior approval from competent authority with authentic evidence of records justifying dewatering etc. complete as directed . |
| 17 | Item No.17 :- Providing cohesive non-swelling (CNS) material lining to canals using selected material from approved borrow area (Government acquired land) including cos tof al lmaterials,machinery, labour, spreading soil in layers of thickness not more than150mm including providing 20cm or so (perpendicular to side slope) of extra pride,removing pride just prior to the placement of lining,breaking clods, watering, compacting to density control of not less than 95% of Proctor density, dressing to required profile including cost of water etc.complete with lead upto1km for water and all lifts as directed. |
| 18 | Item No.18:-Providing and laying in situ M-15 (20 MSA)(28 days cube compressive strength not less than 15N/sqmm) grade cement concrete with clean, hard, graded aggegrates for canal lining for side and bed including cost of all materials, machinery, labour, cleaning with batching plant and transit mixer placing in position, finishing with all slope of canal including scaffolding, formwork, compaction, curing, by cutting grooves, filling with sealing compound and providing porous plugs preparation of sub grade etc. complete with an initial lead of 1 km and & all lifts as directed.Bed Lining |
| 19 | Slope Lining |
| 20 | Item No.19:-Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete. |
| 21 | Item No. 20 :- Providing and constructing 300 mm thick dry rubble stone pitching with pin headers at 2 per sqm using stones and stone chips from approved source including cost of all materials, labour, hand packing / wedging stone chips, finishing etc.,complete with lead upto 50 m and all lifts as directed. |
| 22 | Item No.21:- Cleaning Grass and removal of Rubbish up to a distance of 50 meter outside the periphery of the area as Directed |
| 23 | Item No.22:- Removing wet silt from canal bed with 15 mtr. Lead and all lift including depositing the excavated stuff etc. Complete as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender