Tender For Widening And Strengthening Of The Kalli Neemsar Panahnagar Road Odr In Sitapur District From Chainage 0.000 To Chainage 10.000 Into A 4-Lane Road Length 10.00 Km
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Nov 2026
5 days left
EMD
59.69 Lakhs
Bank guarantee accepted
Document Fee
2715
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sitapur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Widening And Strengthening Of The Kalli Neemsar Panahnagar Road Odr In Sitapur District From Chainage 0.000 To Chainage 10.000 Into A 4-Lane Road Length 10.00 Km
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. |
| 2 | Construction of Embankment with approved material (Carted Earth) obtained from borrowpits with all lifts and leads, spreading,grading to required slope and compecting to meet requirement of table 300-2. |
| 3 | Excavation for road work in soil with hydraulic excavator of 0.90 cum bucket capacity including cutting and loading in tipper,trimming bottom and side slopes in accordance with requirments of lines,grades and cross sactions,and transporting to the embankment location with in all lifts and lead upto 1000m. |
| 4 | Dismantling of Flexible PavementsDismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately |
| 5 | Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per Technical Specification Clause 401. |
| 6 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase/base course on well prepared surface and compacting with vibratory roller to achieve the desired density.Technical specification clause 406 |
| 7 | Providing and applying primer coat with bitumen emulsion SS2 on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70kg/sqm using manual means . |
| 8 | Providing and applying tack coat with bitumen VG_10 using Bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. |
| 9 | Dense graded bituminous macadam Grade lProviding and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 4.0 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. |
| 10 | Dense graded bituminous macadam Grade lIProviding and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. |
| 11 | Providing and laying bituminious concrete Grade-II with 100-120 TPH batch type hot mix plant producing an average output of 75 tonne per hour using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.4 per cent of mix and filler, transporting the hot mix to work site,laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT & H Specifications Clause 509 complete in all respects. |
| 12 | Construction of subgrade and earthen shoulder with approved material obtained from borrowpits with all lifts and leads,spreading,grading to required slope and compected to meet requirement of table 300-2. |
| 13 | Providing and Laying of Interlocking Concrete Block Pavements having thickness 80 mm as per drawings and Technical Specification Clause 1504. |
| 14 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) SOR Sr. no,.-16 Ref - 5.1.3 |
| 15 | Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications. |
| 16 | Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. |
| 17 | Furnishing and Placing Reinforced/ Prestressed cement concrete in super-structure as per drawing and Technical Specification. RCC Grade M20 |
| 18 | Furnishing and Placing Reinforced/ Prestressed cement concrete in super-structure as per drawing and Technical Specification. RCC Grade M25 |
| 19 | Laying reinforced cement concrement pipe for culverts on first class bedding of granular material in single row including fixing collar with cement motar 1:2 but excluding excavation,protection works,back filling, concrete and masonary works in head walls (600 mm dia NP-3 hume pipe ) |
| 20 | Laying reinforced cement concrement pipe for culverts on first class bedding of granular material in single row including fixing collar with cement motar 1:2 but excluding excavation,protection works,back filling, concrete and masonary works in head walls (1000 mm dia NP-3 hume pipe ) |
| 21 | Providing Weep holes in Brick masonary/Plain/ Reinforced Concrete abutement, wing wall/return wall with 100mm dia AC pipe, extending through the full width of Structure with slope of 1V:20H towards drawing force. Complete as per drawing And Technical Specification. |
| 22 | Pointing with cement mortar (1:3) on brickwork in sub structure & super structure as per drawing and technical specification clauses 613.3 , 1204 and 1208.4 |
| 23 | Plastering with cement mortar (1:4) 15 mm thick on brickwork in substructure/ superstracutre as per technical specification clauses 613.4 & 1204 |
| 24 | Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications |
| 25 | Dewatering of ground water for trenches with hire charges operational & fuel charges of pump with operator etc complete as poer direction of E/l. |
| 26 | Reinforced cement concrete M-15 grade kilometer stone/local stone of standard design as per IRC:8, fixing inposition including painting & printing etc. as per technical specification clause 1703 |
| 27 | Reinforced cement concrete M-15 grade Hectometer stone/local stone of standard design as per IRC:8, fixing in position including painting & printing etc. as per technical specification clause 1703 |
| 28 | Routine maintenance charge @ 2.50% of total cost, up to 5 years for any defect/damaged found after construction of all works including restoration of paved surface, shoulders, culverts, road furniture etc complete as per direction of E/I. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender