Tender For Construction Of 66/11Kv ,2 X 3 Mva Substation, With Lilo Arrangement Of Chalamthang- Pamphok Line At Namthang (Maneydara), Under Namchi District.
Tender Value
15.52 Crore
Estimated cost
Bid Submission
02 Dec 2026
10 days left
EMD
38.81 Lakhs
Bank guarantee accepted
Document Fee
3 Lakhs
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South District → Sikkim
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 66/11Kv ,2 X 3 Mva Substation, With Lilo Arrangement Of Chalamthang- Pamphok Line At Namthang (Maneydara), Under Namchi District.
BOQ
| Sl. No. | Item Description |
| 1 | PART A ELECTRICAL WORKS |
| 2 | ELECTRICAL PORTION: |
| 3 | POWER TRANSFORMER |
| 4 | 3MVA, 66/11KV ONAN Dyn 11 with OLTC/RTCC panel with accessories and first filling of oil and 10% spare oil in non- returnable drums, Conforming to IS:2026 (Part I to IV) Oil IS:335 |
| 5 | CIRCUIT BREAKER |
| 6 | 72.5 KV ,3150 A, 31.5 KVA SF6 breakers complete with operating mechanism, including first filling of SF6gas complete with supporting structures, accessories, filling kit and terminal connectors. |
| 7 | CURRENT TRANSFORMEER |
| 8 | 72.5 kV Current Transformers 5 core (1 phase)1200 -600-300-150/1-1-1-1-1 A, 5 core 0.2 class ,31.5 kA with 120%extended current rating with marshalling boxes, terminal connectors etc. |
| 9 | ISOLATOR |
| 10 | 3phase 1250 A, 31.5 kA with one earth switch (Double break Isolator with motor/manual operated) |
| 11 | 3phase 1250 A, 31.5 kA without earth switch Double break Isolator motor/manual operated |
| 12 | LIGHTINING ARRESTORS |
| 13 | 60 KV lighting arrestors complete with insulating phase, surge counters, terminal connectors complete as required. |
| 14 | CONTROL AND RELAY PANEL |
| 15 | 132/66/11 KV Transformer (without A/R) with numerical differential protection relays and earth fault / over current relays complying to IEC 61850 Protocol with optical fibber ports sufficient DI/DO for scheme withadditional 6 DI/DO for spare. |
| 16 | BUS BAR EQUIPMENTS |
| 17 | Set of 66KV tension insulators string comprising of 7 nos B/S type disc insulator having minimum breaking strength 70KN including necessary hardware and fittings. |
| 18 | Post top insulators for busbar equipment. |
| 19 | ACSR PANTHER CONDUCTOR for Bus Bar. |
| 20 | Single Tension Fittings |
| 21 | Single Suspension 'I' Fittings |
| 22 | PG clamp for Panther to Panther (Dog to Dog). |
| 23 | T-connector for Panther to Panther (Dog to Dog). |
| 24 | L.A. Pad |
| 25 | Overhead Shielding wire of size 7/3.15 mm of 100 Kg.F/M (600*0.429) |
| 26 | Earthing lugs for ovderhead shielding wire |
| 27 | Earthing Clamps for overhead shielding wire |
| 28 | Earthing strain clamps for overhead shielding wire |
| 29 | Panther to 2IPS tube to 'L' type connector |
| 30 | 2''IPS tube to P.T pad |
| 31 | 2''IPS tube to B.P.I. connector |
| 32 | Panther to Panther B.P.I. connector |
| 33 | 2''IPS tube to straight connector to B.P.I. pad |
| 34 | 2''IPS tube to isolator connector |
| 35 | 2''IPS tube to C.T. connector |
| 36 | Isolator to Panther connector |
| 37 | 2''IPS tube to SF6 connector |
| 38 | T-connector for Panther to Panther (Dog to Dog) |
| 39 | 66KV HARDWARE ERECTION |
| 40 | Line bay |
| 41 | Transformer bay |
| 42 | Bus arrangement for switchyard |
| 43 | 132 kV Solid Core, Bus post Insulators for erection hardware |
| 44 | SWITCHYARD STRUCTURE |
| 45 | Switchyard structure including base plate, base dias 'V' bolts, fixing arrangments, insulator strings, foundation bolts with nuts and lock nuts, nuts and bolts with counter sunk bolts, washers spacers, gusset plates, step bolts with standard nuts, lock nuts and stubs complete and all other accessories to complete the structure. |
| 46 | Columns |
| 47 | Beams |
| 48 | SUPPORTING STRUCTURES |
| 49 | Three Phase isolator |
| 50 | Current Transformer |
| 51 | Lightining Arrerstor |
| 52 | Post Insulators |
| 53 | COPPER CONTROL CABLES: ARMOURED |
| 54 | 12 Core x 1.5 sq.mm. |
| 55 | 4 Core x 2.5 sq.mm |
| 56 | 2 Core x 1.5 sq.mm. |
| 57 | 10 Core x 2.5 sq.mm |
| 58 | 12 Core x 2.5 sq.mm |
| 59 | 4 Core x 6 sq.mm |
| 60 | Fire Fighting Equipment |
| 61 | 4.5 Kg DCP Type |
| 62 | 4.5 Kg CO2 Type |
| 63 | 12 Fire buckets with stand |
| 64 | Smoke detection system with all accessories and fittings |
| 65 | Sub-Station Earthing |
| 66 | 40 mm MS rod for main earth mat |
| 67 | 75x12 mm G.I Flats for risers for equipments, columns and structures |
| 68 | 50x6 mm G.I flats for risers for all other equipments etc. |
| 69 | Materials for Earthing pits with supply of all earthing materials includingbase plate. |
| 70 | BATTERY & CHARGER |
| 71 | Battery bank sealed and maintenance free lead acid battery of 200AH 55Nos 2volts each with terminal voltage of 110V Conforming to IS:1652 |
| 72 | Battery charger set having facility for both trickle and boost charging complete with necessary protection and other instruments 110V. |
| 73 | ACDB & DCDB CUBICLE |
| 74 | 415V ACDB totally enclosed metal clad type complete with copper bus bar, cable socket, 400A MCCB for incoming and required MCB of 32A DP, 64A FP for outgoing to 66KV & 11KV CR panel in control room. |
| 75 | 110V DCDB totally enclosed metal clad type complete with copper bus bar, cable socket, 200A MCCB for incoming and required MCB of 32A DP, 64A FP for outgoing to 66KV & 11KV CR panel in control room. |
| 76 | 11 KV VCB PANEL |
| 77 | 11 KV, 800 Amp indoor VCB Panels with indoor horizontal isolation, horizontal draw outs complete with vacuum interrupters, motor / manual operated spring charger mechanism, trip closing coils,NO+NC auxiliary contacts, anti pumping devices, mechanical counters and mechanical spring position indicator complete with provision of parts, sub elements, CTs + PTs and all accessories : |
| 78 | Out going |
| 79 | POWER CABLES: |
| 80 | 6.35 KV ( Uo) / 11 KV(U) XPLE INSULATED ARMOURED CABLE WITH ALUMINIUM CONDUCTOR CONFORMING TO IS:7098 PART-2. |
| 81 | 1 x 300 sqmm |
| 82 | 11/11 KV ( UE) XPLE INSULATED ARMOURED CABLE WITH ALUMINIUM CONDUCTOR CONFIRMING TO IS: 7098/11/85. |
| 83 | 3 x 95 sqmm |
| 84 | 3 x 120 sqmm |
| 85 | 3 x 240 sqmm |
| 86 | HEAT SHRINKABLE STRAIGHT THROUGH JOINTING KIT FOR 11KV (E) 3 CORE XLPE (KIT NO. EPKJ 3115-3118) RAYCHEM MAKE OR EQUIVALENT: |
| 87 | 3 C X 240 SQMM |
| 88 | 3 C X 120-185 SQMM |
| 89 | 3 C X 95 SQMM |
| 90 | HEAT SHRINKABLE OUTDOOR TYPE END TERMINATION KIT FOR 6.6 KV(UE)/11 KV (E) 3 CORE XLPE (KIT NO.EOKT 3332-3382) RAYCHEM MAKE OR EQUIVALENT: |
| 91 | 3 C X 300 sqmm EPKT 3372 |
| 92 | 3 C X 240 sqmm EPKT 3372 |
| 93 | 3 C X 120 sqmm EPKT 3362 |
| 94 | 3 C X 95 sqmm EPKT 3352 |
| 95 | 1C X 300 sqmm |
| 96 | STATION DISTRIBUTION TRANSFORMER |
| 97 | 200 KVA, 11 KV/433V, 3 Phase station, Aluminium wound distribution transformer complete in all respect including first filling of oil and other required accessories as per IS |
| 98 | L.T distribution switch board with Aluminium bus bar, out-door type Kiosk, having electrolytic annealed copper bus bar 50x12mm for phase & 50x6mm for neutral circuits mounted on glazed porcelain or Bakelite base & fitted with voltmeter, ammeter, selector switches for ammeter & voltmeter, electronic KWH meter, indicating lamps cabin light, fabricated with 12 gauge M.S plain sheet, painted with anti- rust primer & two coats of Epoxy paint of shade 631 as per IS: 8623-1, front opening doors with gasket & locking arrangement complete with following incoming & outgoing controls: |
| 99 | LTDB 400 A |
| 100 | INCOMING: 1 No.400 A, 4P,50KA, MCCB |
| 101 | OUTGOING: 3 Nos. 100A TP MCCB, 35 KA, & 1 No. 32A TP MCCB, 35 KA all with built in Thermo Magnetic Release. |
| 102 | 1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS CONE ALUMINIUM CONDUCTORS ARMOURED: |
| 103 | 3.5 Core x 35 sqmm |
| 104 | 3.5 Core x 70 sqmm |
| 105 | 3.5 Core x 95 sqmm |
| 106 | 3.5 Core x 120 sqmm |
| 107 | L.T 1.1 KV INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE (DENSION): |
| 108 | 3x50 & 3.5x35sqmm |
| 109 | 3.5 x 70 sqmm |
| 110 | 3.5 x 95 sqmm |
| 111 | 3.5 x 120 sqmm |
| 112 | Rigid U PVC pipe as per IS 4985-2000 working pressure 6 kgf/cm2 (Finolex) |
| 113 | 110 mm dia |
| 114 | FLEXIBLE SUPER PVC GREEN PIPE 3.5KG/CM2 |
| 115 | 4\\"dia |
| 116 | PIPE ACCESSORIES |
| 117 | PVC Bends 110 mm dia |
| 118 | HUME PIPE |
| 119 | RCC Hume Pipe 2000 mm long 150 mm dia with collars as required. |
| 120 | ILLUMINATION FIXTURE. |
| 121 | 8.5 Mtr long Steel tubular Swaged pole ( 410 - SP - 21 |
| 122 | 9 Mtrs. Long 410-SP-30 swaged type steel tubular pole with CI base plate & cap, double part ( Nuts & bolts type) working load 172 Kgs |
| 123 | LED Street light 45 Watt |
| 124 | LED Street light 90 Watt |
| 125 | FEEDER PILLARS: OUTDOOR TYPE CUBICLE CONFORMING TO IS:8623-1 |
| 126 | Main Feeder Panel: Cubicle design totally enclosed and water proof outdoor type floor mounted suitable for use in 440 V,400A main feeder pillar |
| 127 | Incomer : 1 No 400 A, MCCB, 50KA |
| 128 | Outgoing: 2 Nos. 200 A TPN MCCB & 4 Nos. 32 A TPN, MCB for individual service connections. |
| 129 | Sub-Main Feeder Panel: Cubicle design totally enclose.& water proof outdoor type floor mounted suitable for use in 440V 200 A as a sub-main feeder pillar: |
| 130 | Incomer: 1 No. 200 A, TPN MCCB |
| 131 | Outgoing: 3 Nos. 63 A TPN MCCB & 4 Nos. 32 A MCCB for individual service connections &8 Nos16 TPN for individual service connection. |
| 132 | 1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED |
| 133 | 2 Core x 10 sqmm |
| 134 | 3 Core x 16 sqmm |
| 135 | Polycarbonate junction box with bus bar arrangement and 6 Amp MCB (Street lights) |
| 136 | Miniature Circuit breakers (MCB) Single pole 240V 6 - 32 Amps 10KA |
| 137 | 1.5 sqmm. ISI marked FRLSH PVC insulated Single core industrial multistrand copper conductor voltage grade up to 1100 V. |
| 138 | 2.5 sqmm. ISI marked FRLSH PVC insulated Single core industrial multistrand copper conductor voltage grade up to 1100 V. |
| 139 | Painting of swaged poles |
| 140 | 1 ltr./pole red oxide |
| 141 | 1 ltr./Aluminium paint |
| 142 | SAFE EARTHING MODEL T-39 SHORT CURRENT 50KA RMS FOR 1 SEC(EHV) APPLICATION CONFORMING TO IS: 3043 |
| 143 | 80 mm diameter x 3 Mtrs. Electrode (Copper Bonded) & two bags backfill chemical compound. |
| 144 | ALUMINIUM THIMBLES SHORT BARREL CONFORMING TO IS:8309 |
| 145 | Aluminium thimble ring 70sqmm |
| 146 | Aluminium thimble ring 95sqmm |
| 147 | Aluminium thimble ring 120sqmm |
| 148 | Aluminium thimble ring 150sqmm |
| 149 | Aluminium thimble ring 185sqmm |
| 150 | Aluminium thimble ring 240sqmm |
| 151 | Aluminium thimble ring 300sqmm |
| 152 | Aluminium thimble ring 400sqmm |
| 153 | Electrically insulated 11KV mats in front of electrical control panel 1m x2.5mx8mm one side checkered finished |
| 154 | D.G. Set 62.5KVA including Mobile Vehicle |
| 155 | 12 mtrs long Mast Light with 6 way LED flood light including automatic control panel, complete set. |
| 156 | On load Changeover Switches Four pole (Side Handle) in sheet enclosure 100 amps / 415 V |
| 157 | Off load Changeover Switches (Side Handle) in sheet enclosure Four pole 400 amps 415 V |
| 158 | Excavation of 0.45*0.9*1.00m cable trench in mix soil & refilling with available excavated earth and providing cement concrete on the top of the trench. |
| 159 | Concreting of above switchyard light mounting with 1:4:8 mix ccm. |
| 160 | Placement of feeder 1.5 mx1mx0.2m in 1:3:6 cc plum pillar. |
| 161 | Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix. |
| 162 | Fencing for 200 KVA parapet mounted distribution sub-station of size 3x3 mtrs.constructed with 50x50x5mm M.S angle vertical props, 35x35x6mm M.S angle supports(double run), M.S wire mesh, 50x6mm M.S flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soling & flooring works in 1:4:8 cc. |
| 163 | Placement of 200 KVA Distribution Transformer on parapet of size 1.2x1.2x1mtrs. In 1:3:6 cc Mix including 12 mm thick cement plaster in 1:4 Mix. |
| 164 | CIRCUIT BREAKER |
| 165 | 72.5 KV ,3150 A, 31.5 KVA SF6 breakers complete with operating mechanism, including first filling of SF6gas complete with supporting structures, accessories, filling kit and terminal connectors. |
| 166 | CURRENT TRANSFORMEER |
| 167 | 72.5 kV Current Transformers 5 core (1 phase)100/50/1-1 A, 2 core 0.2 class ,31.5 kA with 120%extended current rating with marshalling boxes, terminal connectors etc. |
| 168 | VOLTAGE TRANSFORMER |
| 169 | 66 KV/√3,110/√3 volt, single phase voltage transformer of accuracy class 0.5 and burden of 200 VA with first filling of oil and complete with terminal connectors. |
| 170 | ISOLATOR |
| 171 | 3phase 1250 A, 31.5 kA with one earth switch (Double break Isolator with motor/manual operated) |
| 172 | 3phase 1250 A, 31.5 kA without earth switch Double break Isolator motor/manual operated |
| 173 | LIGHTINING ARRESTORS |
| 174 | 60 KV lighting arrestors complete with insulating phase, surge counters, terminal connectors complete as required. |
| 175 | CONTROL AND RELAY PANEL |
| 176 | 132KV and 66KV line (with A/R) with numerical distance protection relays and earth fault / over current relays complying to IEC 61850 Protocol with optical fibber ports sufficient DI/DO for scheme with additional 6 DI/DO for spare. All indicating meters/ multifunction meters shall be communicable type with 0.5 class accuracy. |
| 177 | BUS BAR EQUIPMENTS |
| 178 | Set of 66KV tension insulators string comprising of 7 nos B/S type disc insulator having minimum breaking strength 70KN including necessary hardware and fittings. |
| 179 | Post top insulators for busbar equipment. |
| 180 | ACSR PANTHER CONDUCTOR for Bus Bar. |
| 181 | Single Tension Fittings |
| 182 | Single Suspension 'I' Fittings |
| 183 | PG clamp for Panther to Panther (Dog to Dog) |
| 184 | T-connector for Panther to Panther (Dog to Dog) |
| 185 | L.A. Pad |
| 186 | Overhead Shielding wire of size 7/3.15 mm of 100 Kg.F/M (600*0.429) |
| 187 | Earthing lugs for ovderhead shielding wire |
| 188 | Earthing Clamps for overhead shielding wire |
| 189 | Earthing strain clamps for overhead shielding wire |
| 190 | Panther to 2IPS tube to 'L' type connector |
| 191 | 2''IPS tube to P.T pad |
| 192 | 2''IPS tube to B.P.I. connector |
| 193 | Panther to Panther B.P.I. connector |
| 194 | 2''IPS tube to straight connector to B.P.I. pad |
| 195 | 2''IPS tube to isolator connector |
| 196 | 2''IPS tube to C.T. connector |
| 197 | Isolator to Panther connector |
| 198 | 2''IPS tube to SF6 connector |
| 199 | T-connector for Panther to Panther (Dog to Dog) |
| 200 | SWITCHYARD STRUCTURE |
| 201 | Switchyard structure including base plate, base dias 'V' bolts, fixing arrangments, insulator strings, foundation bolts with nuts and lock nuts, nuts and bolts with counter sunk bolts, washers spacers, gusset plates, step bolts with standard nuts, lock nuts and stubs complete and all other accessories to complete the structure |
| 202 | Columns |
| 203 | Beams |
| 204 | SUPPORTING STRUCTURES |
| 205 | Three Phase isolator |
| 206 | Current Transformer |
| 207 | Voltage Transformer |
| 208 | Lightining Arrerstor |
| 209 | Post Insulators |
| 210 | COPPER CONTROL CABLES: ARMOURED |
| 211 | 12 Core x 1.5 sq.mm. |
| 212 | 4 Core x 2.5 sq.mm |
| 213 | 2 Core x 1.5 sq.mm. |
| 214 | 10 Core x 2.5 sq.mm |
| 215 | 12 Core x 2.5 sq.mm |
| 216 | 4 Core x 6 sq.mm |
| 217 | SUB STATION EARTHING |
| 218 | 40 mm MS rod for main earth mat |
| 219 | 75x12 mm G.I Flats for risers for equipments, columns and structures |
| 220 | 50x6 mm G.I flats for risers for all other equipments etc. |
| 221 | Materials for Earthing pits with supply of all earthing materials includingbase plate. |
| 222 | 11 Mtrs. Long steel latticed structure of 65x65x6mm complete with nuts and bolts confirming to specification of design details No. 1/L/FT/E&PD/11Mtrs. |
| 223 | M.S Channel ISLC75 ( 75x40x6mm) SAIL Brand conforming to IS: 808 |
| 224 | M.S Channel ISLC 100(100x50x6.4mm) SAIL Brand conforming to IS: 808 |
| 225 | M.S Flat 50x6 mm SAIL Brand conforming to IS: 808 |
| 226 | M.S Bolts with Nut 16x200 / 250 mm conforming to IS: 1364 |
| 227 | M.S Bolts with Nut 16x165 mm conforming to IS: 1364 |
| 228 | M.S Bolts with Nut 16x90 mm conforming to IS: 1364 |
| 229 | Back Clamps 75 x 8 mm flat |
| 230 | 11 KV Disc Insulator70 KN T/C Type (Porcelain/Polymer) |
| 231 | COMPLETE HARDWARE FITTINGS FOR 11 KV DISC INSULATOR T/C TYPE SUITABLE FOR :- |
| 232 | Dog Conductor |
| 233 | 11 KV Pin Insulator with G.I Pin & fittings as required (Porcelain/Polymer) |
| 234 | G.I.guy assembly complete 7/12 SWG GI stay wire, 140x85mm HT Guy Insulator, 16 mm. dia stay rod, 1.8 mtrs. Long with bow thimble, turn buckle and 300x300x6mm anchor plate. |
| 235 | DOG Conductor 100 sqm, 6/4.72+7/1.57 |
| 236 | SAFE EARTHING MODEL T-19 SHORT CURRENT 20KA RMS FOR 1 SEC(LV / MV) APPLICATION :- |
| 237 | 50 mm diameter x 2 mtrs. Electrode (Copper bonded) & One bag backfill chemical compound. |
| 238 | No. 8 SWG G.I. wire for continuous earth wire. |
| 239 | 11 KV, 3 Pole 400amp, Air Break G.O.S tilting type, three insulator per phase, complete with all fittings conforming to IS:9920 & IS: 9921 (Porcelain/Polymer) |
| 240 | 9 KV,5 KA Single pole unit Metal Oxide Gapless Surge Arrestor for 11 KV, 50 c/s solidly earthed neutral system conforming to IS:3070 (Part 3) |
| 241 | 11000 volts danger plate. |
| 242 | 11 KV, 3 Pole, 400 amp. D.O.F Unit complete with all accessories conforming to IS: 9385 (Porcelain/Polymer) |
| 243 | Barbed wire for anti climbing device @ 2kg/pole. |
| 244 | Red Oxide Metal Primer (Nerolac or Equivalent) |
| 245 | Aluminium Paint (Nerolac or Equivalent) |
| 246 | Concreting of 11Mtrs Lattice Structure / Swaged STP in 1:4:8 cc in 0.9x0.9x2.05mtrs cement plaster of parapet in 1:4 mix. |
| 247 | Concerting of guy assembly in 1:4:8 cc in 0.40x0.40x1.05 mtrs. pit. |
| 248 | 11 Mtrs.long steel latticed structure of 65x65x6mm complete with nuts and bolts confirming to specification of design details No. 1/L/FT/E&PD/11Mtrs. |
| 249 | 9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs. |
| 250 | 11 KV Disc Insulator90 KN T/C Type (Polymer) |
| 251 | Complete hardware fittings for 11KV disc insulator T&C type confirming IS:731 suitable for Dog conductor. |
| 252 | 11 KV Pin Insulator with G.I Pin & fittings as required (Polymer) |
| 253 | M.S Channel ISLC75 ( 75x40x6mm) SAIL Brand conforming to IS: 808 |
| 254 | Back Clamps 75 x 8 mm flat |
| 255 | M.S Nuts & Bolts 12mm diax 100mm full thread conforming to IS: 1364. |
| 256 | A.C.S.R DOG Conductor 100 sqm, 6/4.72+7/1.57 |
| 257 | A.C.S.R WEASEL Conductor 30 sqmm, 6/2.59+1/2.59 |
| 258 | Guy assembly complete with 7/10 SWG GI Stay wire, 140X85 mm HT Guy insulator, 18mm dia stay rod 1.8 mtrs long with bow thimble, turn buckle and 300X300X6 mm anchor plate. |
| 259 | Painting of pole with Red oxde paints. |
| 260 | Painting of pole with Alumnium paints. |
| 261 | Parallel groove clamp suitable for Weasel conductor. |
| 262 | Danger board 11000volt. |
| 263 | Barbed wire |
| 264 | 11 KV 50 Sq.mm Covered Conductor (AAAC) |
| 265 | 11 KV Class Polymeric Pin Insulator with GI Pin, Nuts & Bolts. |
| 266 | Metalic Ties (Top / Side) for 11 KV Class Polymeric Insulator. |
| 267 | 11 KV Polymeric Tension Insulator, 70 KN with Clamps, Nuts & Bolts. |
| 268 | 11 KV Class Polymeric Tension Hardware with Clamps, Nuts & Bolts. |
| 269 | Insulating Piercing Connector. |
| 270 | 11 KV Tension Mid Span Jointing Kit for Covered Conductor. |
| 271 | 11 KV Termination Kit for Covered Conductor |
| 272 | Safe earthing model T-19 short time current 50 KA rms for 1 sec.with 50 mm dia x 2mtrs. Copper bonded Electrode & one bags backfill chemical compound. Conforming to IS:3043. |
| 273 | G.I Wire 8 SWG continuous earthwire. |
| 274 | Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix. |
| 275 | Concretng of 11mtr pole in 1:4:8 cc in 0.9x0.9x2.05 mtrs pit, construction of paraper 0.61x0.61x0.153mtrs in 1:3:6 cc i/c 12mm cement plaster of paraper in 1:4 mix. |
| 276 | Concreting of HT Guy assembly in 1:4:8cc in 0.40X0.40X1.05 mtrs pit. |
| 277 | 11 KV AERIAL BUNCHED CABLE (ABC) 3x50 + 1x70 sqmm |
| 278 | 9 Mtrs. Long 410-SP-33 swaged type steel tubular pole with CI base plate & cap, double part ( Nuts & bolts type) working load 245 Kgs. |
| 279 | AB Cable hanging clamps / tension clamps (Galvanized) |
| 280 | 11 KV Suspension Clamp with attachment for AB Cable |
| 281 | J-Hook for laying of 11 KV AB cable |
| 282 | J-Hook Clamp for laying of 11 KV AB cable |
| 283 | Straight through Joint kit suitable for 95 - 120 sqmm |
| 284 | T-Jointing kit for 95 -120 sqmm |
| 285 | Termination kit for 95 - 120 sqmm |
| 286 | Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate |
| 287 | T-19 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound. |
| 288 | Earthing Coil of 115 turns of 50 mm dia and 2.5 Mtr lead of 40 mm GI wire etc., as required. |
| 289 | 11 KV Caution Board |
| 290 | Red Oxide Metal Primer conforming to IS: 2074 (1.5/pole) |
| 291 | Aluminium paint @ 1.0 ltr / pole |
| 292 | Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix. |
| 293 | Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit. |
| 294 | Self supporting galvanised towers complete with stub/template/bolts and nuts. |
| 295 | Large angle angle Tension towers |
| 296 | Superstructure |
| 297 | 3 mtrs. Extns. |
| 298 | 6 mtrs. Extns. |
| 299 | 9 mtrs. Extns. |
| 300 | Stub and cleat set for normal structure +3, +6 and +9 mtrs. for large angle tower. |
| 301 | Stub setting templates for use with +3, +6 and 9m extn |
| 302 | For large angle Tension tower. |
| 303 | Number plates, with bolts, nut and washers set. |
| 304 | Danger plates with bolts, nuts and washers. |
| 305 | Phase plates with bolts, nuts and washers. |
| 306 | Anti-climbing devices : |
| 307 | For large angle tension tower. |
| 308 | Earthing of tower : |
| 309 | 80 mm diameter x 3 Mtrs. Electrode (Copper Bonded) & two bags backfill chemical compound. |
| 310 | ACSR Dog conductor 6/4.72 sq. mm. Al. 7/1.57 mm steel with sang. |
| 311 | 7/3.15 mm steel, 100 Kg/sq mm quality galvanised steel standard. guard wire. |
| 312 | Conductor accessories : |
| 313 | Mid span compression joint |
| 314 | Repair sleeve |
| 315 | Vibration dampers. |
| 316 | Arching horns. |
| 317 | P.G.Clamp |
| 318 | Ground wire accessories : |
| 319 | Mid span compression joint |
| 320 | Tension clamps. |
| 321 | Bonding pieces. |
| 322 | Single tension insulator strings |
| 323 | Long Rod Polymer Insulator 70 KN of light weight |
| 324 | Preparatory Works |
| 325 | Site levelling, Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 326 | Setting of stubs excluding cost of excavation and concreting: |
| 327 | For Large Angle Tension tower. |
| 328 | Excavation |
| 329 | Excavation work by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m. |
| 330 | Normal Dry Soil (46%) as per SPWD Norms |
| 331 | Soft Rock (27%) as per SPWD Norms |
| 332 | Hard Rock (27%) as per SPWD Norms |
| 333 | CONCRETING |
| 334 | Providing and Laying in position specified grade of reinforced cement concrete 1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge) excluding the cost of form work, finishing & reinforcement. |
| 335 | Providing and Laying in cement concrete in 1:3:6 mix (1 cement, 3 clean coarse sand, 6 stone aggragrate of 40 mm and down size) including compacting & curing etc all complete. |
| 336 | Supplying, bending and placing in position mild steel including straightening, cutting, bending and placing in position including binding wire complete. |
| 337 | Benching |
| 338 | Excavation work by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m. upto 50 meters. |
| 339 | Revetment Work |
| 340 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual Means) |
| 341 | Providing and Laying in position cement concrete of specified grade 1:2:4 mix (1 cement, 2 coarse sand, 4 graded stone aggregate of 20mm & down size) including compacting curing etc all complete. |
| 342 | Providing and Laying hand packed stone filing in building works with clean hard selected stones, all compl |
| 343 | Mansory Work |
| 344 | Providing and Laying Plum concrete in 1:4:8 c.c. (1cement, 4 coarse sand, 8 clean hard graded stone chips of 40 mm down nominal gauge) with 70% clean hard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction of Engineer in Charge. |
| 345 | Providing and laying Hand Packed wall with clean hard selected stone including centering aligning and slopes/curves etc, complete as per the direction of Engineer in Charge . |
| 346 | Consumption for stock materials |
| 347 | Loading and Unloading of Cementor Steel by manual means and stacking |
| 348 | Cost of Haulage excluding loading and Unloading a Katcha Track and Track in River Bed/Nallan Bed. |
| 349 | Headload of stock materials. |
| 350 | Consumption for non-stock materials |
| 351 | Loading and Unloading |
| 352 | Cost of Haulage excluding loading and Unloading a Katcha Track and Track in River Bed/Nallan Bed. |
| 353 | Headload of non-stock materials. |
| 354 | STONE |
| 355 | Loading and Unloading |
| 356 | Cost of Haulage excluding loading and Unloading a Katcha Track and Track in River Bed/Nallan Bed. |
| 357 | Headload of non-stock materials. |
| 358 | Check Survey, Tower Spotting and Pit marking at site |
| 359 | Preliminary alignment profile, tower spotting check survey, prepartion of tower schedule, pegging of tower centre and pit marking. |
| 360 | Clearing of Bushes, Tree Branches, crops Bamboos, etc, wherever encountered during stringing of the transmission or regular maintenance of the Tr. Line including transportation charges for Thick jungle. |
| 361 | Electrical Total Amount |
| 362 | CONSTRUCTION OF, 66/11 KV SUB STATION AT NAMTHANG SOUTH SIKKIM. ( STRUCTURAL FOUNDATION OF ELECTRICAL EQUIPMENTS ) |
| 363 | Earth work excavation in foundation trenches i/c throwing of spoils and stacking of useful materials for 1.5 m lift and 30 m lead form work site all complete. |
| 364 | All kinds of soil Soil 50% |
| 365 | Hard rock 50% |
| 366 | Providing and laying hand packed stone soling with clean hard selected stones all complete. |
| 367 | Providing and laying cement concrete M – 10 grade (1:3:6 mix) ( 1 cement, 3 clean coarse sand, 6 clean hard graded stone chips in 20 mm and down gauge) i/c centering, shuttering, curing etc. all complete. |
| 368 | Providing and laying cement concrete M – 15 grade (1:2:4 mix) i/c centering, shuttering, curing etc all complete. |
| 369 | Providing and laying Reinforced cement concrete M- 15 grade (1:2:4 mix) ( 1 cement, 2 clean coarse sand, 4 clean hard graded stone chips in 20 mm and down gauge) in all RCC members including centring, shuttering, compacting, curing etc. all complete. |
| 370 | S/B/B and placing in position of Tor Steel Reinforcement as per the design, specification and direction of Engineer in- charge including the cost of binding wire all complete. |
| 371 | Providing, fixing and removing form work for casting RCC items as indicated above: |
| 372 | Procuring, sizing ang laying of M.S angle of size 65 x 65 x 6 mm |
| 373 | Providing box drain of 45 cm x 30 cm of internal dimension and side wall thickness of 23 cm and 30 cm with standard specification and design including providing and laying guard stone as per direction of Engineer-in charge.all complete. |
| 374 | Provision for disposal of excavated soil to some suitable place,etc. all complete.(15km-20km) |
| 375 | Carriage of Stock materials (20km-30km) |
| 376 | Carriage of non stock materials(10Km-15Km) |
| 377 | Carriage of non stock materials(20Km-30Km) |
| 378 | Estimate for the construction of 66/11 KV. Control room at Namthang,South Sikkim. |
| 379 | Excavation in foundation trenches in mixed soil,i/c throwing of spoils within 1.5m left and 30m land from worksite. |
| 380 | Providing&laying handpacked stone soling in building works clean hard selected stones |
| 381 | Providing & laying1:3:6 (20mm and down) cement concrete mix in foundation i/c compacting, curing etc. all complete. |
| 382 | Providing and laying coarsed rubbed stone masonary in 1:4:8 c.c.m ( 1 cement, 4 clean coarse sand & 8 in 1:4:8 c.c.m ( 1 cement, 4 clean coarse sand & 8 down) i/c bond stone, through stone and curing etc, down) i/c bond stone, through stone and curing etc, all complete. |
| 383 | Providing/laying mixed filling inside plinth in 23cm layers consolidated to 15cm i/cwatering, ramming etc all complete . |
| 384 | Providing 25mm thick D.P.C in 1:2:4 mix with water proofing compound 01.5 kg/bag of cement i/c necessary framework, curing etc. |
| 385 | Providing & laying in position1:2:4 mix R.C.C work excluding the cost of form work, finishing & reinforcement but I/c curring etc all complete. |
| 386 | Providing, fixing & removing form work for R.C.C work 70% on the cost of vide item no:7 |
| 387 | S/B/B and placing in position tor steel reinforcement in all R.C.C work i/c cost of binding wires all complete.Vide item no. 7 |
| 388 | 90% for Steel |
| 389 | 1% for mild Steel |
| 390 | Providing and laying first class brick work in one brick thick in super structure of standard size bricks with 1:5 cement mortar(1 cement and 5 clean coarse sand) i/c carriage of bricks upto worksite, curing etc.all complete. |
| 391 | Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 course sand) including carriage of bricks up to work site, curing etc all complete. |
| 392 | Providing and Laying 12mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc. 1:3 mix. All complete |
| 393 | Providing fitting fixing dressed sal wood all type of frames and trusses all complete. |
| 394 | Providing and fixing 12mm thick 100mm wide pelmets with (25mm dia) curtain rods & brackets i/c fixing with (25mmx3mm) M.S flat 10 cm long plugs etc. |
| 395 | P/P/F 35mm thick flush doors shutters, solid block hard core construction with frame 1st class hardwood with well matched 3mm teakply decorative type on both facesfaces of shutters I/c hinges with screws complete. |
| 396 | P/F/F in position of steel section windows of 30mmx30mmx4mm size with 4mm thick glass panes i/c all other accessories etc all complete. |
| 397 | Providing and Laying white or colored glazed vitrified tiles Pearl (white, marvel Atlanta, jet black etc or equivalent) in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 398 | Providing and laying 25 mm thick kota stone slab flloring over 20mm thick base of 1:4 C.M base laid and jointed with grey slurry mixed with pigment to match the shade of the slab i/c rubbing, work polishing etc. all complete. |
| 399 | Providing and laying plum concrete in 1:2:4 cement concrete( 1 cement, 2 clean coarse sand, 4 hard clean graded stone chip of 20mm to 25mm nominal gauge) 50% clear hard stone of sizes not exceeding 15 cm i/c shuttering, compacting and curing, all complete |
| 400 | Providing and laying white or coloured glazed tiles or ceramic tiles in flooring, treads of steps landing etc laid on a bed of 15 mm, 1:3 cement mortar (1 cement 3 clean coarse sand) |
| 401 | Providing & laying1:1.5:3 cement concrete mix i/c compacting, curing etc. all complete.Slab |
| 402 | Providing adnd laying 23cmx23cm internal dimension 'U' shaped drain of standard design and specification all complete. |
| 403 | Providing hold fast of (40mmx5mm) flat iron including fixing to frame with 10mm dia. Bolts, nuts & wodden plugs and embedding in CC 1:3:6 (1 cement, 3 coarse sand, 6 graded stone aggregate 20mm nominal size) block of size (30x10x15)cm. |
| 404 | Providing & distempering with oil bond washable arcylic distemper on new surface of approved brand & manufacture to give even shade I/c preparation of surface etc complete.Vide Item No.(11). |
| 405 | Providing and washing with three or more coats of snowcem, durocem, cemcote etc. of approved quality and manufacture on exterior walls to give an even shade i/c preparation of surface on new surface.Vide Item No(11). |
| 406 | Painting with Aluminium paint two or more coats on new surface to give an even shade I/c cleaning and preparing the surface complete.Vide Item No (15) |
| 407 | Providing & painting with ready mixed paint of approved quality & shade with two or more coats to give an even and smooth shade I/c clearing the surface complete on new surface.Vide Item No(12) |
| 408 | Providing & applying priming coat with ready mixed pink on wood work I/c preparation of the surface by thoroughly cleaning & sand papering etc complete. Vide Item No(12) |
| 409 | Providing and mixing water proof compound with 1:1:5:3 mix roof slab Vide item No.(20) |
| 410 | S/F/F in position steel collapseable gate of 20mm/5mm flat iron all complete. |
| 411 | Provision for disposal of excavated soils and debris and spoils accumulated during construction to some suitable place by mechanical means. |
| 412 | SEPTIC TANK |
| 413 | Clearing of debris and removal of lugs. |
| 414 | Excavation work by mechanical means (Hydraulic Excavator)/manual means in foundation trenches or drains exceeding 30cm depth, 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m. |
| 415 | Filling inside plinth in building works with 23cm layers, consolidated to 15cm including watering, ramming etc, all complete |
| 416 | Excavated Quantity |
| 417 | Providing and Laying first class brick work in one brick thick in superstructure of standard size bricks with 1:5 cement mortar (1cement and 5 clean coarse sand) as per the direction of Engineer in Charge including curing etc all complete. |
| 418 | Providing and Laying 12mm thick cement plaster of specified mix with Recom 3S having a fiber length of 4.8 mm(100gm/bag of ce,ent)in single coat including finishing even and smooth and curing complete (1:4)mix Baffle wall |
| 419 | Providing and Laying 12mm thick cement plaster of specified mix with Recorn 3S having a fiber length of 4.8 mm ( 100 gm /bag of cement) in single coat including finishing even and smooth and curing complete. (1:4) Mix Baffle wall: |
| 420 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual means) |
| 421 | Septic tank |
| 422 | Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:3:6 mix. |
| 423 | Septic tank raft |
| 424 | Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge) |
| 425 | Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:3:6 mix. |
| 426 | Foundation, footings, base of column etc for mass concrete. |
| 427 | Form work |
| 428 | Baffle wall beam |
| 429 | Form work for wall |
| 430 | RCC wall |
| 431 | Form work for slab |
| 432 | Supplying, bending and placing in position of Tor steel reinforcement in all R.C.C works i/c cost of binding wires all complete. Vide Item No( viii) |
| 433 | Carriage of stock materials :(20km but within 30km) |
| 434 | Carriage of stock materials :(20km but within 30km) |
| 435 | Carriage of non-stock materials(10-15 km) |
| 436 | Internal water supply & sanitation |
| 437 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 438 | 20 mm nominal outer dia Pipes |
| 439 | 32 mm nominal outer dia Pipes |
| 440 | Fittings |
| 441 | Providing, Fitting and fixing Chromium plated fittings ofapproved quality and size complete: (ESCO ORIGINAL) |
| 442 | BIB COCK 15 MM DIA |
| 443 | STOP COCK 15 MM DIA (CONCEALED WORKS) |
| 444 | Providing, Fitting and fixing brass fittings of approved quality and size complete: |
| 445 | GATE WAY VALVE 15MM DIA |
| 446 | Providing and placing on terrace high density polyethylene water storage tank with man hole lid and suitable locking arrangement including making holes for inlet, out let and ball cock including testing etc. all complete: (Sintex or equivalent) |
| 447 | Providing, fitting and fixing white vitreous china pedestal (European type) water closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials, including Providing and painting and making good the wall and floors as required all complete: W.C. pan European One pice (Ivory) CAT NO 92008 |
| 448 | Providing, fitting and fixing. white vitreous white china wash flat back basin with CI brackets, painted, 15mm CP brass pillar taps,CP brass chain with rubber plug, 32mm CP brass waste pipe,lead or PVC connection 32mm dia CP brass cap and unions, complete including cutting and making good the walls wherever required. HINDWARE.One wash basin with one pillar cock.(63 cm x 45 cm) |
| 449 | P/F stain less steel kitchen sink with CI brackets, CP brass chain with rubber plug 40mm CP brass waste, CP brass tap etc complete i/c the fittings, cuttings and making good the wall wherever required.610 x 450 x 200 mm |
| 450 | Providing and fitting chromium plated toilet paper holder including the making holes and fixed to timber cleats with CP screws washer etc. all complete:. |
| 451 | Providing, fitting and fixing Beveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete. |
| 452 | Providing and fitting Porcelain soap tray all complete. |
| 453 | Providing, fitting and fixing towel rail of chromium plated brass complete with brackets fixed to the timber cleats, CP brass screws complete.740 x 20 mm |
| 454 | Providing, fitting and fixing soil, waste and vent pipes including testing etc complete.200 mm dia. PRINCE / SUPREME soil Pipe or equivalent soil pipe |
| 455 | Providing and placing Galvanized Steel Water Tank as per IS 804 Specification of different capacities and sixes with all accessories and jointing compound materials and Galvanized steel decking, all complete:3.75x1.25x1.25 |
| 456 | Provision for office furniture |
| 457 | Executive Chairs |
| 458 | Boardroom Chairs: |
| 459 | Standard Office Desks |
| 460 | Lobby Sofas |
| 461 | Lounge Chair |
| 462 | Filing Cabinets |
| 463 | Computer Table |
| 464 | Almirah |
| 465 | Bed (steel/wood) |
| 466 | Matress |
| 467 | Preliminary survey,benching,jungle clearance,tree cutting,Monitoring etc. |
| 468 | Estimate for site levelling and providing protective works for 66/11 KV sub-station/Control Room at Namthag,South Sikkim |
| 469 | Provision for jungle clearence, uprooting and cutting of trees and bushes i/c throwing of spoils for all leads and lifts, all complete. |
| 470 | Hill cutting in mixed soil i/c throwing of spoils for all leads and lifts, all complete. |
| 471 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 472 | Providing and laying coarse rubble stone masonry in 1:4:8 cement concrete in (1cement, 4 clean coarse sand, 8 hard clean graded stone chips) of 21mm- 25mm nominal guage i/c curing etc. all complete. |
| 473 | Retaining wall |
| 474 | Providing and laying hand packed stone soling in building works with clean hard selected stones. |
| 475 | Provision for yard development i/c footpath,railing flowerbeds etc. of control room and class III & IV quarters etc all complete. |
| 476 | Carriage of stock materials |
| 477 | Loading and unloading of stone chips and Stone by manual means and stacking |
| 478 | Cost of Haulage Excluding Loading and Unloading |
| 479 | Head load for Stock Materials for 100 m |
| 480 | Carriage of non-stock materials |
| 481 | Loading and unloading of stone chips and Stone by manual means and stacking |
| 482 | Cost of Haulage Excluding Loading and Unloading,For Surfaced Road |
| 483 | Head load for Stock Materials for 100 m |
| 484 | Carriage of non-stock materials(10km-15 Km) |
| 485 | Loading and unloading of stone chips and Stone by manual means and stacking |
| 486 | Cost of Haulage Excluding Loading and Unloading |
| 487 | Head load for Stock Materials for 100 m |
| 488 | ESTIMATE FOR CONSTRUCTION OF RCC BUILDING (CLASS II QUARTER) AT NAMTHANG SOUTH SIKKIM |
| 489 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 490 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones all complete. |
| 491 | Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. In 1:3:6 mix |
| 492 | Providing and Laying Plum concrete in 1:2:4 c.c. (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) with 70% clean hard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction of Engineer in Charge. |
| 493 | Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge) |
| 494 | Supplying, bending and placing in position tor steel reinforcement in all R.C.C works including cost of binding wires, all complete. |
| 495 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber) |
| 496 | Foundation, footings, base of column etc for mass concrete. |
| 497 | Beam, lintels, girders, brersumers and cantilevers. |
| 498 | Floor slab, roof slab, landing, balcony and access platform. |
| 499 | Square columns |
| 500 | Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 coarse sand) as per the direction of Engineer in Charge including curing etc all complete. |
| 501 | Providing, fitting and fixing of dressed sal timber in all types of frames complete(locally available). |
| 502 | Providing fitting and fixing in position of fully paneled shutters in windows and doors of champ timber or equivalent including steel butt hinges screws 12mm thick panels etc complete.(30mm thick panel door). |
| 503 | Providing fitting and fixing water proof flush doors shutters, solid block hard core construction with frame of 1st class hard timber, with well matched 3mm commercial ply (both faces) including hinges with screws complete. 30 mm |
| 504 | P/F/F in position of fully glazed shutters in windows and doors of champ wood or equivalent including steel butt hinges, screws, 3mm glass panes of modi guard or equivalent etc complete.(30mm) |
| 505 | Providing and Laying 15mm thick cement plaster in 1:3 mix i/c finishing even and smooth and curing etc. all complete. |
| 506 | Providing and Laying white or colored glazed vitrified tiles Pearl (white, marvel Atlanta, jet black etc or equivalent) in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 507 | Providing and Laying white or colored glazed tiles anti skid ( elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalent in flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 508 | Providing and Laying white or colored glazed tiles of size 200mm x 300mm of plain/normal prints colours (white, grey, ivory, platinum, cream, glacier white, summers and, beach, wood duro, melody, or equivalent) in skirting, risers of steps and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry |
| 509 | Providing and Laying flooring with granite marble stone slabs 20mm thick granite stone slabs flooring of size not less than 1.0 sqm of 20mm thick laid over 20mm(average)1:4cm thick bare laid cement concrete and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete. |
| 510 | Providing U shaped drain of 23cm (ht) x 23 cm (width) of internal dimension with 1:2:4 Plum concrete (40mm & down) side wall thickness of 23 cm on both side with 1:3:6 (20 mm & down) base concrete of thickness of 15 cm with standard specification over 15 cm stone soling including 1:3 cement plaster with neat cement polishing & rounding of junction, as per the direction of the Engineer in Charge. |
| 511 | White washes three or more coats with white lime to give an even shade including cleaning the surface to remove dirt, dust, mortar drop etc on new surface complete. |
| 512 | Providing and Providing and painting with plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete. |
| 513 | Cost of Haulage Excluding Loading and Unloading in surfaced roads for 10 km |
| 514 | Loading and Unloading of Cement or Steel by Manual means and stacking |
| 515 | Cost of Haulage Excluding Loading and Unloading in surfaced roads for 10 km |
| 516 | Cost of Haulage Excluding Loading and Unloading in surfaced roads for 10 km |
| 517 | Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum |
| 518 | Stone |
| 519 | Water Supply and Sanitation |
| 520 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 521 | 15 mm nominal outer dia Pipes |
| 522 | 25 mm nominal outer dia Pipes |
| 523 | Fittings |
| 524 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) |
| 525 | BIB COCK 15 MM DIA |
| 526 | STOP COCK 15 MM DIA (CONCEALED WORKS) |
| 527 | Providing, Fitting and fixing brass fittings of approved quality and size complete: |
| 528 | GATE WAY VALVE 15MM DIA |
| 529 | Providing and placing on terrace high density polyethylene water storage tank with man hole lid and suitable locking arrangement including making holes for inlet, out let and ball cock including testing etc. all complete: (Sintex or equivalent) |
| 530 | Providing, fitting and fixing white vitreous china pedestal (European type) water closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials, including Providing and painting and making good the wall and floors as required all complete: W.C. pan European One pice (Ivory) CAT NO 92008 |
| 531 | Providing, fitting and fixing. white vitreous white china wash flat back basin with CI brackets, painted, 15mm CP brass pillar taps,CP brass chain with rubber plug, 32mm CP brass waste pipe,lead or PVC connection 32mm dia CP brass cap and unions, complete including cutting and making good the walls wherever required. HINDWARE.One wash basin with one pillar cock.(63 cm x 45 cm) |
| 532 | P/F stain less steel kitchen sink with CI brackets, CP brass chain with rubber plug 40mm CP brass waste, CP brass tap etc complete i/c the fittings, cuttings and making good the wall wherever required.610 x 450 x 200 mm |
| 533 | Providing and fitting chromium plated toilet paper holder including the making holes and fixed to timber cleats with CP screws washer etc. all complete:. |
| 534 | Providing, fitting and fixing Beveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete. |
| 535 | Providing and fitting Porcelain soap tray all complete. |
| 536 | Providing, fitting and fixing towel rail of chromium plated brass complete with brackets fixed to the timber cleats, CP brass screws complete.740 x 20 mm |
| 537 | Providing, fitting and fixing soil, waste and vent pipes including testing etc complete.200 mm dia. PRINCE / SUPREME soil Pipe or equivalent soil pipe |
| 538 | Estimate for providing switchyard fencing of power complex at Namthang,South Sikkim. |
| 539 | Earthwork in excavation in all kinds of soils in foundation trenches i/c dressing of all sides, watering i/c disposal of excavated earth upto 30m lead etc. all comp. |
| 540 | Providing&laying hand packed stone soling with clean hard selected stone etc. all comp. |
| 541 | Providing&laying in position cement concrete in 1:2:4 mix i/c compacting,curing etc. all complete. |
| 542 | Supplying,fabricating,fixing pointing and erceting of M.S. angle of size 50x50x6mm. |
| 543 | Supplying,fixing,fabricating of m.s. flats of size 50x6mm. |
| 544 | Brick Work in half brick thick with 1:4 cement mortar |
| 545 | Providing and Laying 15mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete. |
| 546 | Carriage of stock materials (20km-30km) |
| 547 | Loading and unloading of cement by manual means and stacking |
| 548 | For Surfaced Road |
| 549 | Head load for Stock Materials for 100 m |
| 550 | Carriage of non-stock materials (30km-40km) |
| 551 | Sand: |
| 552 | Cost of Haulage Excluding Loading and Unloading,For Surfaced Road |
| 553 | Head load for Non Stock Materials for 100 m |
| 554 | Carriage of non-stock materials (20km-30km) |
| 555 | Stone |
| 556 | Cost of Haulage Excluding Loading and Unloading,For Surfaced Road |
| 557 | Head load for Non Stock Materials for 100 m |
| 558 | For 42+50 ; 2(42+50) |
| 559 | Supplying,providing ,fabricating and erection of expended metal for fencing. |
| 560 | Provision for construction of steel gate for entrance to switchyard 5mx2m with appropiate size of m.s. angles and flats and channels etc. all complete. |
| 561 | ESTIMATE FOR CONSTRUCTION OF SEPTIC TANK FOR CLASS II QUARTER |
| 562 | Clearing of debris, removal of all damaged structural surfaces, and dumping of all debris to designated dumping sites, all complete |
| 563 | Excavation work by mechanical means (Hydraulic Excavator)/manual means in foundation trenches or drains exceeding 30cm depth, 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m. |
| 564 | Filling inside plinth in building works with 23cm layers, consolidated to 15cm including watering, ramming etc, all complete |
| 565 | Providing and Laying first class brick work in one brick thick in superstructure of standard size bricks with 1:5 cement mortar (1cement and 5 clean coarse sand) as per the direction of Engineer in Charge including curing etc all complete. |
| 566 | Providing and Laying 12mm thick cement plaster of specified mix with Recorn 3S having a fiber length of 4.8 mm ( 100 gm /bag of cement) in single coat including finishing even and smooth and curing complete. (1:4) Mix |
| 567 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual means) |
| 568 | Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:3:6 mix. Septic tank Raft |
| 569 | Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge) |
| 570 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with imported timber from outside the state) |
| 571 | Foundation, footings, base of column etc for mass concrete. |
| 572 | Form work for beam, lintels, girders, brersumers & cantilevers.(Baffle Wall Beam) |
| 573 | Form work for Wall ,RCC Wall |
| 574 | Form work for Floor slab, roof slab, landing, balcony and access platform. (Slab) |
| 575 | Supplying, bending and placing in position of Tor steel reinforcement in all R.C.C works i/c cost of binding wires all complete. |
| 576 | Haulage for stock material via surface Road for the distance of 40km excluding loading and unloading all complete. |
| 577 | Loading and unloading of cement & steel by manual means and stacking,Vide Item No 10 |
| 578 | Cost of Haulage Excluding Loading and Unloading |
| 579 | For 20 km Surfaced rd |
| 580 | Haulage for stock material via surface Road for the distance of 40km excluding loading and unloading all complete. |
| 581 | DENSITY |
| 582 | Loading and unloading of non stock material by manual means and staking |
| 583 | Cost of haulage excluding loading and unloading |
| 584 | For 20 km |
| 585 | Haulage for stock material via surface Road for the distance of 40km excluding loading and unloading all complete. |
| 586 | Stone Boulder,vide item no. 5 |
| 587 | DENSITY |
| 588 | Loading and unloading of non stock material by manual means and staking |
| 589 | Cost of haulage excluding loading and unloading,For 20 km |
| 590 | ESTIMATE FOR CONSTRUCTION OF OFFICE BUILDING ABOVE EXISTING QUARTER ABOVE EXISTING QUARTER AT NAMTHANG SOUTH SIKKIM |
| 591 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber) for square columns(rectangular) |
| 592 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber) for beams, lintels griders bresumers and cantilevers. |
| 593 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber) for floor slab roof slab landing balony and access platform. |
| 594 | Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge) |
| 595 | Supplying, bending and placing in position tor steel reinforcement in all R.C.C works including cost of binding wires, all complete. |
| 596 | Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 coarse sand) including carriage of bricks up to work site, curing etc all complete. |
| 597 | Providing and Laying 12mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc. all complete.1:3 mix |
| 598 | Providing and Laying white or colored glazed vitrified tiles of Orient/Somani or equvalent colour in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 599 | Providing and Laying white or colored glazed vitrified tiles of Orient/Somani or equvalent colour in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 600 | Providing and Laying white or colored glazed tiles anti skid ( elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalent in flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 601 | Providing and Laying white or colored glazed vitrified tiles of Orient/Somani or equvalent colour in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 602 | Providing, fitting and fixing of dressed sal timber in all types of frames complete. |
| 603 | Providing fitting and fixing in position of fully paneled shutters in windows and doors of champ timber or equivalent including steel butt hinges screws 12mm thick panels etc complete.(32mm thick panel door). |
| 604 | Providing hold fast of (40mmx5mm) flat iron including fixing to frame with 10mm dia. Bolts, nuts & timber plugs and embedding in CC 1:3:6 (1 cement, 3 coarse sand, 6 graded stone aggregate 20mm nominal size) block of size (30x10x15)cm.as per the diretion of Engineer- in- Charge all complete. |
| 605 | Providing fitting and fixing sliding door bolts with nuts and screws etc all omplete. Brass(Bright finish) |
| 606 | Providing fitting and fixing Tower Bolts 300mm x 10mm (barrel type) with nuts and screws etc all complete. Brass (Bright finish) |
| 607 | Providing fitting and fixing handles 125mm size with necessary screws etc all complete. Brass(Bright finish) |
| 608 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)Casement window double panels with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash /mullion 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.50 sqm). |
| 609 | Providing and laying plaster of paris putty of 2mm thick over lastered surface to prepare the surface even and smooth all complete. |
| 610 | Providing and distempering with oil bound washable acrylic distemper two or more coats of approved brand or manufacture over a coat of cement primer to give an even shade on new surface including preparation of surface etc complete. |
| 611 | Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt,dust etc and sand papering and filling the scratches complete on New surface. |
| 612 | Providing, fitting and fixing white vitreous china pedestal (European type) water closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials, including Providing and painting and making good the wall and floors as required all complete: W.C. pan European One pice (Ivory) CAT NO 92008 |
| 613 | Providing, fitting and fixing white vitreous china flat back or wall corner type lipped front urinal basin of size 440x315x325 mm with 5 ltr automatic flushing cistern with C.I. brackets, GI flush pipe and spreaders with brass unions and G.I. clamps including cutting and making good the walls and floors as required all complete:Range of 1 Urinal basin. |
| 614 | Providing, fitting and fixing. white vitreous china wash angle back basin with CI brackets, painted, 15mm CP brass pillar taps, CP brass chain with rubber plug, 32mm CP brass waste pipe, lead or PVC connection 32mm dia CP 'brass cap and unions, brass stop cock, complete including cutting and making good the walls wherever required.One wash basin with one pillar cock 35 cm x 35 cm |
| 615 | Providing and fitting chromium plated toilet paper holder including the making holes and fixed to timber cleats with CPscrews washer etc. all complete:. |
| 616 | Providing, fitting and fixing Beveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete. |
| 617 | Providing and fitting Porcelain soap tray all complete |
| 618 | Providing, fitting and fixing soil, waste and vent pipes includingtesting etc complete.200 mm dia. PRINCE / SUPREME or equivalent soil pipe |
| 619 | Providing, fitting and fixing soil, waste and vent pipes including testing etc complete.160 mm dia. PRINCE / SUPREME or equivalent soil pipe |
| 620 | Providing, Fitting and fixing PVC 32mm dia pipe complete with GI fittings and clamps including cuttings and making good the walls etc. on wall for wash basin connector to main line |
| 621 | Fittings |
| 622 | Providing and placing on terrace high density polyethylene water storage tank with man hole lid and suitable locking arrangement including making holes for inlet, out let and ball cock including testing etc. all complete: (Sintex or equivalent)2000 LITERS CAPACITY |
| 623 | Box Drain |
| 624 | Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 50 metres |
| 625 | Providing box drain of 30 cm (ht) x 45 cm (width) internal dimension with 1:2:4 Plum concrete (20mm & down) in side walls thickness of 23 cm (hill side) and 30 cm (road side) and 1:3:6 (20 mm & down) base concrete of thickness of 15 cm with standard specification over 15 cm stone soling including providing & laying guard stones complete, as per the direction of the Engineer in Charge. |
| 626 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber)Floor slab, roof lab, landing, balcony and access platform. |
| 627 | Supplying, bending and placing in position tor steel reinforcement in all R.C.C works including cost of binding wires, all complete. |
| 628 | Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge) |
| 629 | THEORITICAL CONSUMPTION OF |
| 630 | CEMENT |
| 631 | STONE |
| 632 | STEEL |
| 633 | Loading and unloading of cement steel by manual means and stacking |
| 634 | Carriage of cement steel within 30 km |
| 635 | Loading and unloading of sand by manual means |
| 636 | Carriage of sand within 40km |
| 637 | Loading and unloading of 20mm by manual means |
| 638 | Carriage of 20mm within 40km |
| 639 | Add furniture and furnishing |
| 640 | Executive Chairs |
| 641 | Boardroom Chairs: |
| 642 | Standard Office Desks |
| 643 | Lobby Sofas |
| 644 | Lounge Chair |
| 645 | Filing Cabinets |
| 646 | Computer Table |
| 647 | Almirah |
| 648 | INTERNAL ELECTRIFICATION OF 66/11 KV SUB-STATION CONTROL ROOM BUILDING,CLASS II QUARTER AND OFFICE BUILING AT NAMTHANG SOUTH SIKKIM. |
| 649 | WIRING WITH PVC INSULATED (FRLSH) SINGLE CORE MULTISTANT COPPER CONDUCTOR VOLTAGE GRADE UPTO 1100V IN MS SURFACE CONDUIT PIPE. |
| 650 | Wiring for light/Fan/Call bell & 6 A plug point with 2 x 1.5 sqmm FRLSH PVC insulated copper conductor single core cable in surface 19mm dia MS conduit pipe and earthing the point with 1x1.5 sqmm FRLSH PVC insulated copper conductor single core cable as required. |
| 651 | Wiring for 16 A plug point with 2x2.5 sqmm FRLSH PVC insulated copper conductor single core cable in 19mm dia MS surface conduit pipe and earthing the point with1x 2.5 sqmm FRLSH PVC insulated copper conductor single core cable as required. |
| 652 | Wiring for sub-main with 2x6.0 sqmm FRLSH PVC insulated copper conductor single core cable in 25mm dia MS surface conduit pipe and earthing the point with 1x6.0 sqmm FRLSH PVC insulated copper conductor single core cable as required. |
| 653 | Supplying & fixing Conduit inspection bend 1/2\\",3/4 & 1\\" |
| 654 | Supplying & fixing Conduit inspection Tee 1/2\\",3/4\\" & 1\\" |
| 655 | Supplying & fixing Conduit inspection round 1/2\\",3/4\\" & 1\\" (1, 2,3 & 4 way) |
| 656 | SWITCH, SOCKET AND ACCESSORIES MODULAR TYPE (PREMIUM) |
| 657 | Supplying & fixing 06 amps 1 way FT switch on white moduler plate and metal flux box including connection etc. as required. |
| 658 | 1 no. 06 amps FT switch with 1 no white 1 moduler plate and 1 moduler metal flux box. |
| 659 | 2 no. 06 amps FT switch with 1 no white 2 moduler plate and 2 moduler metal flux box. |
| 660 | 3 no. 06 amps FT switch with 1 no white 3 moduler plate and 3 moduler metal flux box. |
| 661 | 4 no. 06 amps FT switch with 1 no white 4 moduler plate and 4 moduler metal flux box. |
| 662 | 6 no. 06 amps FT switch with 1 no white 6 moduler plate and 6 moduler metal flux box. |
| 663 | 8 no. 06 amps FT switch with 1 no white 8 moduler plate and 8 moduler metal flux box. |
| 664 | Supplying & fixing 1 no. 06 amps socket with 1no. 06 amps switch, 1 no. 3 module white plate & 1 no. 3 module metal flux box) including connection etc. as required. |
| 665 | Supplying & fixing 1 no. 16 amps socket, & 16 amps switch, white plate (4 module) & Metal flux box (4 module) including connection etc. as required. |
| 666 | Supplying & fixing 1 no. fan step regulator 120 watts, 1 no. white plate (2 module) and 1 no. (2 module) metal flux box including connection etc. as required. |
| 667 | Supplying & fixing 1 no. 2 way switch with 1 no 1module white plate & 1 no 1 module metal flux box including connection etc. as required. |
| 668 | LIGHT FITTING & ACCESSORIES |
| 669 | Supplying & fixing LED tube light fitting 22 watts 4 ft including connection etc. as required.. |
| 670 | Supplying & fixing surface LED fitting 12 watts including connection etc. as required. |
| 671 | Supplying & fixing Angle/Batten holder with 9 watts LED lamp including connection etc. as required. |
| 672 | Supplying & fixing wall lamp fitting (Decorative) with LED lamp including connection etc. as required. |
| 673 | Supplying, Installation, testing & commissioning of Ceiling Fan 1200mm with complete accessories including connection as required. |
| 674 | Supplying, Installation, testing & commissioning of ventilating fan 250mm including connection as required. |
| 675 | Supplying & fixing Calling bell (Ding-Dong) with 100mm x 150mm sunmica box including connection etc. as required. |
| 676 | Supplying, Installation ,testing & commissioning of storage water heater including connection as required. |
| 677 | 25 ltr capacity |
| 678 | DISTRIBUTION SYSTEM, SERVICE CONNECTION & EARTHING |
| 679 | Supplying, installation, testing & commissioning of Main switch fuse units |
| 680 | Triple pole & neutral 100 amps / 415 V |
| 681 | Supplying, installation, testing & commissioning of Copper Bus-bar chamber |
| 682 | 4 pole 063 Amps |
| 683 | Supplying, installation, testing & commissioning of Miniature circuit breaker |
| 684 | Double pole 40 amps. |
| 685 | Single pole 6 Amp |
| 686 | Single pole 16 Amp. |
| 687 | Supplying & installation of MCB distribution board Double Door/Single door |
| 688 | 8 ways SPN (Double door) |
| 689 | Providing, laying, testing & commissioning of 1.1 KV grade PVC insulated aluminium armoured conductor cable on surface of the wall of building with required size of aluminium shadle and screw etc. as required. |
| 690 | 3.5 core 35 sqmm |
| 691 | Surge Protection Device: SPD 40KA 3P + N, (Type 2 SPDs ) 2 Mod |
| 692 | Providing & earthing with 2 mtr. Long safe earthing with T-19 electrode & 1 bag back fill chemical compound |
| 693 | ProvIding & laying of G.I. strips 25mm X 5mm looping earth from earth electrode to main distribution system of the building Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender