Tender For Various And Maintenance Work In Honble Punjab And Haryana Hgih Court, Sector 1, Chandigarh. (Ch. To . Ar/Sr Court Room No. 1 To 9)
Tender Value
12.32 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
5 days left
EMD
24644
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Various And Maintenance Work In Honble Punjab And Haryana Hgih Court, Sector 1, Chandigarh. (Ch. To . Ar/Sr Court Room No. 1 To 9)
BOQ
| Sl. No. | Item Description |
| 1 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour Old work (one or more coats) |
| 2 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat |
| 3 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work DSR 13.99.1 |
| 4 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 5 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 6 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) |
| 7 | French spirit polishing : Two or more coats on new works including a coat of wood filler |
| 8 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 9 | 12 mm cement plaster of mix: 1:4(1 cement: 4 fine sand) |
| 10 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm |
| 11 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) 250x10 mm |
| 12 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm |
| 13 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm |
| 14 | Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Size 40 mm |
| 15 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
| 16 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 17 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 18 | Providing M.S. Piano hinges ISI marked IS: 3818 finished with nickel chromium plating grade I as per IS: 1068 and fixing with necessary screws etc., complete. Overall width 35 mm |
| 19 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm |
| 20 | Providing and laying vitrified floor tiles in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 21 | Providing and fixing 1mm thick mica (Formica, Kit, Archid or equivalent) of approved shade and quality on commercial surface fixed in position by means of fevicol and nails etc. (As per sample approved by Hon'ble Building Committee, Punjab and Haryana High Court, Chandigarh) complete in all respect to the entire satisfaction of Engineer in Charge. NS |
| 22 | Providing and fixing 4mm thick teak ply (ISI marked) with existing wooden members including the cost of nails, fevicols etc. complete in all respect to the entire satisfaction of Engineer-in-charge. |
| 23 | Providing and fixing 4 mm thick commercial ply (ISI marked) on the existing wooden members including the cost of nails, fevicols etc. including painting two coats of synthetic enamel paint over one coat of primer complete in all respect to the entire satisfaction of Engineer-in-charge. NS |
| 24 | Providing and fixing of plyboard consisting of 18 mm thick commercial ply(ISI marked) phenol bonded fixed with hard wood battens and guttles including the cost of necessary lipping screws, nails, fevicol complete in all respect and to the entire satisfaction of the Engineer in charge. N.S |
| 25 | Providing and fixing heavy duty telescopic channel for drawers 18\\" to be fixed with necessary screws complete in all respects and to the entire satisfaction of the Engineer in charge. |
| 26 | Providing and fixing 6mm thick commercial ply (ISI marked) on the existing wooden members including the cost of nails, fevicols etc. including painting two coats of synthetic enamel paint over one coat of primer complete in all respect to the entire satisfaction of Engineer-in-charge. |
| 27 | Providing and fixing of teak wood hanger duly spirit polish complete in all respect and to the entire satisfaction of Engineer-in-charge. (As per sample approved by Hon'ble Building Committee , Punjab and Haryana High Court, Chandigarh). |
| 28 | Providing and fixing 6mm thick fibre cement board, in ceiling / panelling, on the exisitng wooden frame, with the help of self drilling screws, including prepration of surface with cement base putty to provide smooth surface and painting with plastic emulsion, complete in all respects and to the entire satisfaction of the Engineer in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender