Tender For Renovation Of House No. 2323 And Vacant House No. 2327B, 1356B, Type-Ii (New) (03 Nos. Houses), Sector-19, Chandigarh (Ibm No. W4/2026/26301)
Tender Value
2.54 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
6 days left
EMD
5080
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of House No. 2323 And Vacant House No. 2327B, 1356B, Type-Ii (New) (03 Nos. Houses), Sector-19, Chandigarh (Ibm No. W4/2026/26301)
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : DSR 17.3 |
| 2 | W.C. pan with ISI marked white solid plastic seat and lid: DSR 17.3.1 |
| 3 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: DSR 17.7 |
| 4 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps: DSR 17.7.3 |
| 5 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : DSR 17.10 |
| 6 | Kitchen sink without drain board DSR 17.10.2 |
| 7 | 610x460 mm bowl depth 200 mm.DSR 17.10.2.2 |
| 8 | Providing and fixing 8 mm dia C.P./ S.S. Jet with flexible tube upto1 Mtr long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. DSR 17.16.A |
| 9 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.DSR 17.28 |
| 10 | Semi rigid pipe: DSR 17.28.1 |
| 11 | 32 mm dia DSR 17.28.1.1 |
| 12 | Providing and fixing soil, waste and vent pipes : DSR 17.35 |
| 13 | 75 mm diameter : DSR 17.35.2 |
| 14 | Centrifugally cast (spun) iron socketed pipe as per IS: 3989: DSR 17.35.2.2 |
| 15 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : DSR 17.60 |
| 16 | 100 mm inlet and 75 mm outlet: DSR 17.60.2 |
| 17 | Sand cast iron S&S as per IS - 3989: DSR 17.60.2.1 |
| 18 | Providing &fixing G.I.pipes complete with G.I. fittings , clamps, i/c cutting and making good the walls etc. DSR 18.10 |
| 19 | 15 mm dia nominal bore DSR 18.10.1 |
| 20 | 20 mm dia nominal bore DSR 18.10.2 |
| 21 | 32 mm dia nominal bore DSR 18.10.4 |
| 22 | Providing and fixing of Gun-Metal Peat Valve, complete in all respect DSR 18.17A |
| 23 | size 20mm i/d DSR 18.17.1A |
| 24 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : DSR 18.18 |
| 25 | 20 mm nominal bore DSR 18.18.2 |
| 26 | Providing & fixing uplasticised PVC connection pipe with brass unions : DSR 18.21 |
| 27 | 45 cm length DSR 18.21.2 |
| 28 | 15 mm nominal bore DSR 18.21.2.1 |
| 29 | Providing & fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) DSR 18.46 |
| 30 | 20 mm nominal bore DSR 18.46.2 |
| 31 | Providing & placing on terrace (at all floor levels) polyethylene water storage tank, ISI 12701 marked,with cover and suitable locking arrangement and making necessary holes forinlet,outlet and overflow pipes but without fittings and the base support for tank.[500 ltr] DSR 18.48 |
| 32 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :DSR 18.49 |
| 33 | 15 mm nominal bore DSR 18.49.1 |
| 34 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. DSR 18.51 |
| 35 | 15 mm nominal bore DSR 18.51.1 |
| 36 | Providing and fixing C.P.brass stop cock (concealed) of standard design and of approved make conforming to DSR18.52 |
| 37 | 15 mm nominal bore. DSR 18.52.1 |
| 38 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming DSR 18.53 |
| 39 | 15mm nominal bore DSR 18.53.1 |
| 40 | Providing and fixing of Extension nipple upto 1-1/2\\" length DSR 18.53A |
| 41 | Cutting holes up to 30x30 cm in walls including making good the same:DSR 18.76. |
| 42 | With common burnt clay F.P.S. (non modular) bricks |
| 43 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. DSR 18.78 |
| 44 | Providing and fixing of C.P. Steel Grating Heavy (With hole without hole) 100 mm dia, of approved make |
| 45 | Providing and fixing of CP Brass/SS/ABS overhead shower with swiveling Joint , 125mm dia (min) with C.P Brass/ S.S Shower Arm and flange to the satsifaction of EIC of approved make ESSCO Model No. 536A & 542A or equialent Model of CERA /Kerovit/ Jal |
| 46 | Providing and fixing of CP Brass/SS Towel Ring with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36524 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 47 | Providing and fixing of CP Brass/SS Towel Rail 600mm of with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36520 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 48 | Providing and fixing of CP Brass/SS/ABS Soap Tray made of Plastic including glass bowl of approved make Jal Model No. 36540 or equialent Model of CERA /Kerovit/ ESSCO |
| 49 | Providing and fixing of C.P. brass Cup ( Heavy Duty ) of approved make |
| 50 | Providing and fixing of Looking glass mirror 5mm thick of approved make with PVC beading 1-1/4\\"x3/4\\" with plastic Hard Board duly fixed on wall with screw/nuts/clips/rod plug |
| 51 | Providing and fixing Tank Nipple complete in all respect |
| 52 | 20 mm dia |
| 53 | Providing drip seal joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : |
| 54 | 75 mm |
| 55 | Supplying and fixing in position pre-cast RCC/SFRC Cover with frame of quality MD-10 and size 450mm |
| 56 | Dismantling of Old material, not reuseable, including GI / HCI Pipe & Specials, Faucets, Ceramic Fixtures, PVC tanks & allied items and disposal of malba including that of chase from site to a approved dumping site complete. |
| 57 | Providing and fixing GI Elbow 32 mm x 80mm approved make or equivalent model of approved make to the satisfaction of EIC |
| 58 | Providing and fixing of Gun metal peat valve ISI Marked |
| 59 | 15 mm dia nominal bore |
| 60 | Supplying and fixing of RCC/SFRC Cover with frame for Gully Trap Complete of Approved make Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender