Health and Family Welfare Government Departments Closing in 6 days TDR #58580888

Tender For Renovation Of Vacant House No. 2202, 2184, 2196 And Occupied House No. 2232 (Type-11Jc) (Total 04 No Houses) Sector-19, Chandigarh (Ibm Scheme No. W4/2026/26652)

Issued by Government Departments · Chandigarh, Chandigarh
Tender Value
3.81 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
6 days left
EMD
7633
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Renovation Of Vacant House No. 2202, 2184, 2196 And Occupied House No. 2232 (Type-11Jc) (Total 04 No Houses) Sector-19, Chandigarh (Ibm Scheme No. W4/2026/26652)

BOQ

Name of Work:- Renovation of Vacant House No. 2202, 2184, 2196 and Occupied House No. 2232 (Type-11JC) (Total 04 No Houses) Sector-19, Chandigarh (IBM Scheme No. W4/2026/26652)
Sl. No. Item Description
1Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :DSR 2.10
2Pipes, cables etc, not exceeding 80 mm dia DSR 2.10.1.1
3Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : DSR 17.3
4W.C. pan with ISI marked white solid plastic seat and lid. DSR 17.3.1
5Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P.brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : DSR 17.7
6White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps DSR 17.7.3
7Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : DSR 17.10
8Kitchen sink without drain board
9610x460 mm bowl depth 200 mm DSR 17.10.2.2
10Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. DSR 17.16 A
11Providing &fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. DSR 17.28
12Semi rigid pipe17.28.1.1
13Providing and fixing soil, waste and vent pipes :DSR 17.35
1475 mm diameter : DSR 17.35. DSR 17.35.2.2
15Providing & fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :DSR 17.60
16100 mm inlet and 75 mm outlet DSR 17.60.2.1
17Providing &fixing G.I.pipes complete with G.I. fittings , clamps, i/c cutting and making good the walls etc. DSR 18.10
1815 mm dia nominal bore DSR 18.10.1
1920 mm dia nominal bore DSR 18.10.2
20Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall DSR 18.11
2115 mm dia nominal bore DSR 18.11.1
2220 mm dia nominal bore DSR 18.11.2
23Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : DSR 18.17
2420 mm nominal bore DSR 18.17.1A
2515 mm nominal boreNSR
26Providing & fixing uplasticised PVC connection pipe with brass unions : DSR 18.21
2745 cm length DSR 18.21.2
2815 mm nominal bore DSR 18.21.2.1
29Providing & fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) DSR 18.46
3015 mm nominal bore DSR 18.46.1
3120 mm nominal bore DSR 18.46.2
32Providing &placing on terrace (at all floor levels) polyethylene water storage tank, ISI 12701 marked,with cover and suitable locking arrangement and making necessary holes forinlet,outlet and overflow pipes but without fittings and the base support for tank.[500 ltr] DSR 18.48
33Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :DSR 18.49
3415 mm nominal bore DSR 18.49.1
35Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. DSR 18.51
3615 mm nominal bore DSR 18.51.1
37Providing and fixing C.P.brass stop cock (concealed) of standard design and of approved make conforming to DSR18.52
3815 mm nominal bore. DSR 18.52.1
39Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming DSR 18.53
4015mm nominal bore DSR 18.53.1
41Providing and fixing PTMT Ball cock of approved quality, colour and make complete DSR 18.62
4220 mm nominal bore, DSR 18.62.2
43Providing and fixing of Extension nippple upto 1-1/2\\" length DSR 18.53A
44Cutting holes up to 30x30 cm in walls including making good the same:DSR 18.76.
45With common burnt clay F.P.S. (non modular) bricks
46Cutting holes up to15x15cm in R.C.C. floors and roofs for passing drain pipe etc.and repairing the hole after insertion of drain pipe etc.with cement concrete 1:2:4 (1cement: 2 coarse sand:4graded stone aggregate20mm nominal size) including finishing complete so as to make it leak proof. DSR 18.77.
47Providing and fixing of CP Brass/SS/ABS overhead shower with swiveling Joint , 125mm dia (min) with C.P Brass/ S.S Shower Arm and flange to the satsifaction of EIC of approved make ESSCO Model No. 536A & 542A or equialent Model of CERA /Kerovit/ Jal
48Providing and fixing of CP Brass/SS Towel Ring with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36524 Warna or equialent Model of CERA /Kerovit/ ESSCO
49Providing and fixing of CP Brass/SS/ABS Soap Tray made of Plastic including glass bowl of approved make Jal Model No. 36540 or equialent Model of CERA /Kerovit/ ESSCO
50Providing and fixing of CP Brass/SS Towel Rail 600mm of with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36520 Warna or equialent Model of CERA /Kerovit/ ESSCO
51Providing & fixing of C.P Cup heavy duty of approved make
52Prov.& fixing of looking Glass with PVC Beeding with Plastic hard board or with Stods complete all respect of approved make
53Providing& Fixing of Drip Seal joints complete in all respect
5475 mm
55Providing and fixing GI Tank Nipple 20 mm dia complete
56Dismantling of Old material, not reuseable, including GI / HCI Pipe & Specials, Faucets, Ceramic Fixtures, PVC tanks & allied items and disposal of malba including that of chase from site to a approved dumping site complete.
57Providing and fixing of C.P. Nozzle Tap for Gardening
58Conversion for OWC to EWC with 4\\" C.I.H.R bend, 4\\" PVC collar 1 No 4\\" PVC pipe of 4kg pressure upto 1'-6\\" long including dismantling of OWC pan and floor and repair of flooring to its original complete in all respect . Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58580888
AUTHORITY Government Departments
TENDER VALUE 3.81 Lakhs
LAST DATE 27-11-2026
Authority
Authority Name Public Health Department.
Work Description Tender for Renovation Of Vacant House No. 2202, 2184, 2196 And Occupied House No. 2232 (Type-11Jc) (Total 04 No Houses) Sector-19, Chandigarh (Ibm Scheme No. W4/2026/26652)
Basic Detail
Tender No PH3/2026/539
Bidding Type Tender
Location
City Chandigarh
State Chandigarh
Key Dates
Publish Date 17 Nov 2026
Submission Date 27 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 3.81 Lakhs
Tender Fee Ref. Documents
EMD 7633
Exemption Not Available
Document List
a9e83378-fa9c-48d1-b6fb-781f008b5e67.html
BOQ_119298.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
html

a9e83378-fa9c-48d1-b6fb-781f008b5e67.html

xls

BOQ_119298.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender