Power Government Departments Closing in 7 days TDR #58580047

Tender For Providing And Erecting Curved Steel-Framed Tensile Fabric Canopy And Illuminated Acp Signage Board At Main Gate Entrance, Amd Complex, Scr, Cherlapally, Hyderabad.

Issued by Government Departments · Medchal Malkajgiri, Telangana
Tender Value
11.58 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
7 days left
EMD
23172
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Medchal Malkajgiri → Telangana
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Providing And Erecting Curved Steel-Framed Tensile Fabric Canopy And Illuminated Acp Signage Board At Main Gate Entrance, Amd Complex, Scr, Cherlapally, Hyderabad.

BOQ

Name of Work:- Providing and Erecting Curved Steel-Framed Tensile Fabric Canopy and Illuminated ACP Signage Board at Main Gate Entrance, AMD Complex, SCR, Cherlapally, Hyderabad.
Sl. No. Item Description
1Notes:1.All work should be done without damaging the existing infrastructure. 2. No Debris/Waste materials shall be left over during the work.3. The contractor has to be clean the site after the complertion of work and handover as satisfection of Engineer-in-Charge.4. Before quoting, the Bidder shall visit the site and make himself familiar with the site nature, conditions and Quantum/ scope of work involved. Site inspection and uploading of report is mandatory. The bidder shall upload the site inspection report duly signed by departmental representative and Bidder. Without the site inspection report, the bid will be summarily rejected.5. The rates quoted shall include cost of all materials, labour, ladders, transportation, hoisting, tools, tackles and installation including all taxes (except EPF and ESI) and other charges if any. No extra payment over and above the rate quoted shall be made to the contractor in this respect.6. The Workers employed for the work still strictly follow all safety measures as stated in safety code of this tender and also as per DAE safety code.
27. The contractor shall adhere to the provisions of applicable labour laws such as Contract Labour (Regulation and Abolition) Act,1970. Minimum Wages Act, 1948, Employee State Insurance Act. Equal Remuneration Act, 1970 and rules made there under.8. Contractor has to pay minimum wages, EPF and ESI to the manpower deployed for the work as per state/ Central Government orders issued from time to time. The actual amount paid towards EPF and ESI shall be reimbursed to him by the department after satisfying that it has been actually and genuinely paid by the contractor The Bidder should not consider EPF and ESI in his rates.
3Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out, refilling and disposal of excavated earth lead upto 150 m and for all lift, as directed by Engineer-in-charge.
4Providing and laying in position cement concrete of M10 grade excluding the cost of centering and shuttering. 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
5Providing and laying in position M20 grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
6Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
7Centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete.
8Providing, Designing, Fabricating, Supplying, Transporting and Erecting Steel Framed Tensile Fabric Canopy of overall size 13.0 m × 7.5 m, height upto 6.0 m at Main Gate, AMD Complex, SCR, Cherlapally, Hyderabad, comprising structural steel tubular columns, rafters, purlins, bracings, stiffeners, gusset plates, cleats, connection plates and all associated structural members fabricated from approved quality MS tubular sections (CHS/SHS/RHS) conforming to relevant IS specifications, complete with base plates, anchor/foundation bolts, templates, stiffeners, sleeves, welding electrodes, nuts, bolts, washers, turnbuckles, fork terminals, swaged end fittings, tensioning devices, clamps, cable assemblies, aluminum fixing profiles (where required), and all other accessories necessary for complete installation.The work shall include structural analysis, design and preparation of detailed shop drawings, fabrication drawings and
9erection drawings using STAAD Pro or equivalent approved structural analysis software, considering dead load, live load, wind load and other applicable loads in accordance with relevant Indian Standards, and obtaining certification/approval of the structural design from a qualified Structural Engineer.The scope shall further include cutting, bending, rolling, drilling, welding, grinding, surface preparation, fabrication and workshop assembly of all structural steel members; loading, unloading, transportation to site, stacking, handling, lifting, hoisting, erection, alignment, plumbing, bolting, welding and commissioning of the complete structure.The steel structure shall be provided with approved anti-corrosive treatment comprising one coat zinc/red oxide/metal primer and two coats synthetic enamel paint of approved shade, including all surface preparation, cleaning, grinding and finishing complete.
10The work shall also include supply and installation of approved PVDF-coated Tensile Membrane Fabric (minimum 650 GSM or higher approved equivalent) with pattern development, computer-aided patterning, cutting, welding, stitching, edge reinforcement, clamping arrangement, tensioning, fine tuning and fixing over the structural frame, complete with all hardware and accessories required for a fully functional tensile canopy.The item rate shall include all labour, tools and plants, lifting equipment, temporary staging, scaffolding, cranes, welding equipment, consumables, transportation, insurance, testing, commissioning and all incidental charges required for completion of the work in all respects. The RCC footings, excavation, PCC, RCC, reinforcement and civil foundation works shall be measured and paid separately under relevant civil engineering items.
11The completed canopy shall be capable of safely resisting all design loads and wind loads as per relevant IS Codes and shall be handed over in complete working condition.
12Providing, fabricating, supplying, transporting, erecting, testing and commissioning of a premium quality outdoor illuminated ACP signage board of approximate size 20'-0\\" × 8'-0\\", comprising a heavy-duty supporting framework fabricated from MS square and rectangular hollow sections of suitable sizes complete with cutting, welding, grinding, anti-corrosive zinc-rich primer and enamel paint finish, anchor fasteners, base plates, chemical anchoring and all necessary accessories, clad with minium 3 mm thick exterior grade ACP sheets in approved colour, fixed over aluminium sub-frame complete with trims, rivets, adhesives and weatherproof sealants; the signage shall consist of 3 mm thick acrylic-faced aluminium channel letters with aluminium coil returns of 40–100 mm depth, CNC router and laser-cut precision fabrication, comprising the main “AMD” title in Hindi, English, Telugu, Other texts and
13Logos, all illuminated with high-brightness, energy-efficient IP65 waterproof LED modules, powered through IP67 waterproof surge-protected LED drivers/power supplies, complete with FRLS copper wiring, conduits, junction boxes, cable glands, MCB protection, earthing arrangement and all internal electrical connections; the entire signage system shall be fully waterproof, dustproof, UV-resistant, corrosion-resistant and suitable for continuous outdoor operation under all weather conditions, with all joints sealed using exterior-grade UV-resistant silicone sealants, including transportation, erection, alignment, fixing, testing and commissioning of the complete system. The work shall be executed as a complete turnkey installation including all materials, labour, tools, lifting arrangements, consumables and incidental items required for satisfactory completion, and shall be covered by a minimum 2-year
14comprehensive warranty against defects in ACP cladding, aluminium channel letters, LED modules, LED drivers, electrical components, waterproofing, illumination performance, with free replacement and rectification of defective components during the warranty period. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58580047
AUTHORITY Government Departments
TENDER VALUE 11.58 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Atomic Minerals Directorate For Exploration And Research
Work Description Tender for Providing And Erecting Curved Steel-Framed Tensile Fabric Canopy And Illuminated Acp Signage Board At Main Gate Entrance, Amd Complex, Scr, Cherlapally, Hyderabad.
Basic Detail
Tender No AMD/CESG/ET-157/2026-27
Bidding Type Tender
Location
City Medchal Malkajgiri
State Telangana
Key Dates
Publish Date 17 Nov 2026
Submission Date 26 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 11.58 Lakhs
Tender Fee Ref. Documents
EMD 23172
Exemption Not Available
Document List
2710d050-1712-46fc-8584-4f5208d9a47f.html
BOQ_982195.xls
GCC.pdf
Preamble.pdf
specificationcivilworks.pdf
Techforms.pdf
Tendernotice_1.pdf
Tendernotice_2.pdf
Undertakings.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 7 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 8 days

Tender Documents

Download All (ZIP) ↓
html

2710d050-1712-46fc-8584-4f5208d9a47f.html

xls

BOQ_982195.xls

pdf

GCC.pdf

pdf

Preamble.pdf

pdf

specificationcivilworks.pdf

pdf

Techforms.pdf

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

pdf

Undertakings.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender