Tender For Upgradation Of Phc Building At Duduka Under Ama Hospital
Tender Value
54.07 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
9 days left
EMD
54070
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Balangir → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Phc Building At Duduka Under Ama Hospital
BOQ
| Sl. No. | Item Description |
| 1 | Colouring- Wall painting two coat with any approved weather coat paint including cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C. |
| 2 | Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint etc complete. |
| 3 | Painting two coats with approved enamel paints of approved colour, shade over a coat of primer including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour etc, complete as per specification & direction of E.I.C. |
| 4 | Repair- Providing, fitting and fixing of Al door with anodized Al. door section of 9202 as vertical member, 9201 as top and 9200 as middle and bottom member with frame section No.9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle no. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges , etc. complete as per direction of the Engineer-in-charge (Top half glass & bottom half of Board) A) Cost of Al. Frame |
| 5 | B) Cost of 12mm thick prelaminated board including wastages |
| 6 | C) Cost of 5mm thick Black Glass including wastages |
| 7 | Supplying Fitting, fixing up aluminium framed window made up aluminium section 9778 as window frame, section 4095, 4096 and 9777, 3994 as shutter frame with aluminium jali as panel fitted with rubber beading including locking arrangement including all fitting including cost of all materials, all taxes, labour, T&P excluding cost of glass etc. complete as per direction of the Engineer-in-charge A) Cost of Al. Frame |
| 8 | B) Cost of Fixing of Mosquito net including cost and labour |
| 9 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of all labour etc. complete in all respect. |
| 10 | R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. |
| 11 | Straightening, cutting, bending bent up or coiled rods, including cranking, hooking, welding or jointing the M.S. rods or tor confirming to I.S. 432 (Plain) and 1785 (Tor) steel and binding, tying the grills, hoisting, lowering and placing in proper position required for R.C.C. works including cost, conveyance and taxes of M.S. rods or tor steel and binding wires of 18 to 20 gauge and cost of all labour etc.complete in all respect. |
| 12 | Supplying, fitting & fixing of Granite Tiles of minimum Above 0.40 sqm. (20mm thick) of approved make in floors laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-charge |
| 13 | Supplying, fitting & fixing of 30cm x 20cm/20cm x 20cm special plain/printed series Ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 in dadoes, skirting and risers of steps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge |
| 14 | Providing fitting fixing of false ceiling with Aluminium anodised T section No.3215 with 2'0\\" center to center, L section No.1705 on 4 walls to be fixed by means of steel screw and P.V.C. plug and the Aluminium grid 2'0\\"x2'0\\" with water proof Gypsum board suspended from ceiling including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge |
| 15 | Supplying,fitting,fixing up Wardrobe made up 18mm WPC of Crystal thermotech limited(Crystal Hybrido) covered with 1mm Laminate((Sunmica) including Cromium coated handel 75mm with 125x25mm/100 mm with 150x25 mm including all fitting including cost of Materials all taxes labour T&P etc. complete as per direction of Engineer-in-charge |
| 16 | BMW- Earth work in excavation in hard soil or gravelly soil including dressing and levelling the bed |
| 17 | Sand filling as per approved drawing and technical specifications as per Section 2100 of MoRT&H Specifications for Road & Bridge works (4th Revision). |
| 18 | Plain cement concrete (1:4:8) nominal mix in foundation as per Drawing and Technical Specification |
| 19 | Providing ,laying of Cement concrete (1:2:4) using 12mm size CBHG chips including watering & curing, cost & conveyence, royalties & taxes etc complete. |
| 20 | Fly ash brick masonry in cement mortar (1:6) using 23 Cm. x 11 Cm. x 8 Cm. size fly ash bricks having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % in foundation and plinth |
| 21 | RCC work in M20 using 20mm & down graded CBHG chips including all cost, conveyance, taxes, royalties, watering & curing and labour with T&P as required for the work etc complete. |
| 22 | (B) Column |
| 23 | (C) Plinth beam |
| 24 | (D) Lintel Bend |
| 25 | (e) Chajja |
| 26 | (F) Wall Beam |
| 27 | (G) Roof slab |
| 28 | Fly ash brick masonry in cement mortar (1:6) using 23 Cm. x 11 Cm. x 8 Cm. size fly ash bricks having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % in Superstructure |
| 29 | 2.5 cm thick grading concrete (1:2:2) on roof slab with 6.7mm & down grades size hard granite crusher broken chips on new work in Ground Floor |
| 30 | Providing ,straighting,cutting,bending,binding of MS tor bar including tying the grills & placing in proper position including cost of 18 to 20 gauge binding wires & MS rod with all labour, T&P etc.complete. |
| 31 | 12mm th. Cement plaster [1:6] over brick /stone masonary including watering curring cost conveyance taxes and royality etc. complete. |
| 32 | 16mm th. Cement plaster [1:6] over brick masonary including watering curring cost conveyance taxes and royality etc. complete. |
| 33 | 6 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment. in Ground Floor |
| 34 | 2.5 cm thick AS Flooring (1:2:4) with 12mm & down grades size hard granite crusher broken chips on new work in Ground Floor |
| 35 | Providing , fitting and fixing of MS Grill for window including cost conveyance taxes etc of approved design as directed by the Department |
| 36 | Priming 1 coat with wall primer water bond cement primer including all labour, materials etc. complete. |
| 37 | Painting two coats with any approved colour of weather seal coat over a coat of Water Bound Wall cement Primer to out side surface |
| 38 | Wall Painting two coats with approved Plastic Emulsion Paint over a coat of Water Bound Wall cement Primer on Plastered Surfacein Ground Floor |
| 39 | Priming one coat with any approved primmer (To Receive Enamel paint) including cost of primmer & labour to give an even shade excluding cost of primer. (As per A.R. 93/1) |
| 40 | Painting two coats to steel work with any approved enamale paint over a coat of primring including cost,conveyance, taxes and labour with T&P etc. complete. |
| 41 | Compound wall- Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lift. complete as directed by the E.I.C.(As Per AR Page No.-1, Item No.-1) |
| 42 | Supplying & filling of foundation with course sand well watered and rammed including cost, cost of all labour, carriage, royalty complete in all respect. (As Per A/R Page No-1, Item No-2) |
| 43 | Plain cement concrete (1:4:8) nominal mix in foundation as per Drawing and Technical Specification |
| 44 | Cement Concrete (1:2:4) using 12mm size hard granite C.B. chips approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C. |
| 45 | R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. A)COLOUM BASE FOOTING |
| 46 | B)COLUMN SUPER STRUCTURE |
| 47 | C) PLINTH BAND |
| 48 | D)FLOOR BEAM |
| 49 | Straightening, cutting, bending bent up or coiled rods, including cranking, hooking, welding or jointing the M.S. rods or tor confirming to I.S. 432 (Plain) and 1785 (Tor) steel and binding, tying the grills, hoisting, lowering and placing in proper position required for R.C.C. works including cost, conveyance and taxes of M.S. rods or tor steel and binding wires of 18 to 20 gauge and cost of all labour etc.complete in all respect. |
| 50 | Brick work with Flyash Bricks 23cm x 11cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Foundation and Plinth including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
| 51 | Brick work with Flyash Bricks 23cm x 11cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Super Structure including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
| 52 | 12mm thick C.P.(1:6) on brick masonary to the smooth surface including watering, curing, cost, carriage, royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
| 53 | Priming 1 coat with wall primer water bond cement primer including all labour, materials etc. complete. |
| 54 | Wall painting two coat with any approved weather coat paint including cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C. |
| 55 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of all labour etc. complete in all respect. |
| 56 | Hoisting joists and trusses and placing in position including the cost of all materials,cost of all labour,conveyance,loading,unloading,T&P etc. all complete as per direction of EIC. |
| 57 | Priming one coat with approved Red Oxide Primer on Steel work in Ground Floor |
| 58 | Painting two coats with approved Enamel Paint on wood work and Steel work in Ground Floor |
| 59 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 mtr openable length ,having 50 nos rounds per 6 mtr length,upto 3 m height of wall with exiting angle iron Y shaped placed 2.4 m or 3 m apart and with 9 horizontal R.B.T reinforced barbed wire,stud tied with G.I. staple and G.I clip to retain horizontal including necessary bolts or G.I. barbed wire tied to anglr iron,all complete as per fencing |
| 60 | Paved internal area- Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lift. complete as directed by the E.I.C.(As Per AR Page No.-1, Item No.-1) |
| 61 | Sand filling as per approved drawing and technical specifications as per Section 2100 of MoRT&H Specifications for Road & Bridge works (4th Revision). |
| 62 | Construction of Granular Sub-base by providing coarsed graded materials,spreading in uniform layer by mortar grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the density, complete as per Clause - 401. |
| 63 | Supplying and fixing of Pre cast kerb stone of size 300mmx300mmx150mm of M30 grade of approved make,design,colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018 |
| 64 | Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP - 63:2018. |
| 65 | Garden- Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lift. complete as directed by the E.I.C.(As Per AR Page No.-1, Item No.-1) |
| 66 | Supplying & filling of foundation with course sand well watered and rammed including cost, cost of all labour, carriage, royalty complete in all respect. (As Per A/R Page No-1, Item No-2) |
| 67 | Cement Concrete (1:3:6) using 40mm size hard granite C.B. metal approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C. |
| 68 | Cement Concrete (1:2:4) using 12mm size hard granite C.B. chips approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C. |
| 69 | Brick work with Flyash Bricks 23cm x 11cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Super Structure including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
| 70 | 12mm thick C.P.(1:6) on brick masonary to the smooth surface including watering, curing, cost, carriage, royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
| 71 | Priming 1 coat with wall primer water bond cement primer including all labour, materials etc. complete. |
| 72 | Wall painting two coat with any approved weather coat paint including cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C. |
| 73 | Providing,fixing of Garden chair(Cement Made) |
| 74 | Providing,fixing of rose Plant |
| 75 | Parking- Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lift. complete as directed by the E.I.C.(As Per AR Page No.-1, Item No.-1) |
| 76 | Supplying & filling of foundation with course sand well watered and rammed including cost, cost of all labour, carriage, royalty complete in all respect. (As Per A/R Page No-1, Item No-2) |
| 77 | Cement Concrete (1:3:6) using 40mm size hard granite C.B. metal approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C. |
| 78 | Cement Concrete (1:2:4) using 12mm size hard granite C.B. chips approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C. |
| 79 | Hoisting joists and trusses and placing in position including the cost of all materials,cost of all labour,conveyance,loading,unloading,T&P etc. all complete as per direction of EIC. |
| 80 | Supplying and fixing Colour G.C.I sheeet on roof drilling hole in wind ties including fixing of ridges valley wind ties etc excluding cost of fittings |
| 81 | Supplying, fitting & fixing of Vitrified Industrial floor tiles of premium grade having thickness 8mm to 10mm confirming to IS 4457 of size 30cm x 30cm in floors of approved make laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge |
| 82 | Priming one coat with approved Red Oxide Primer on Steel work in Ground Floor |
| 83 | Painting two coats with approved Enamel Paint on wood work and Steel work in Ground Floor |
| 84 | Approach road- Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lift. complete as directed by the E.I.C.(As Per AR Page No.-1, Item No.-1) |
| 85 | Sand filling as per approved drawing and technical specifications as per Section 2100 of MoRT&H Specifications for Road & Bridge works (4th Revision). |
| 86 | Construction of Granular Sub-base by providing coarsed graded materials,spreading in uniform layer by mortar grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the density, complete as per Clause - 401. |
| 87 | Supplying and fixing of Pre cast kerb stone of size 300mmx300mmx150mm of M30 grade of approved make,design,colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018 |
| 88 | Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP - 63:2018. |
| 89 | Cow catcher- Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lift. complete as directed by the E.I.C.(As Per AR Page No.-1, Item No.-1) |
| 90 | Sand filling as per approved drawing and technical specifications as per Section 2100 of MoRT&H Specifications for Road & Bridge works (4th Revision). |
| 91 | Plain cement concrete (1:4:8) nominal mix in foundation as per Drawing and Technical Specification |
| 92 | R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying |
| 93 | Straightening, cutting, bending bent up or coiled rods, including cranking, hooking, welding or jointing the M.S. rods or tor confirming to I.S. 432 (Plain) and 1785 (Tor) steel and binding, tying the grills, hoisting, lowering and placing in proper position required for R.C.C. works including cost, conveyance and taxes of M.S. rods or tor steel and binding wires of 18 to 20 gauge and cost of all labour etc.complete in all respect. |
| 94 | Supplying,fitting and fixing of ISMB Sections for cow catcher including labour for lifting,hoisting and placing in position to required size and length,pre fabricating by cutting to sizes,priming including cost of all materials,cost of all labour,loading,unloading at site,all acessories,T&P required for the work complete in all respect as directed by Engineer in charge. |
| 95 | Supplying,fitting and fixing of M.S. Pipe for cow catcher as per specification and design including cutting grooves in bricks or RCC Structure and making good to damage with C.CC. (1:2:4) including welding,cutting,errecting cost conveyance of all materials,cost of all labour,,T&P required for the work etc. |
| 96 | PH Supplying all materials labour T & P and fitting & fixing u-PVC ventilating pipes and fittings of the following O.D. conforming to ISI No. 13592 / 1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method / as per manufacturers specification testing e.w. in excavation in all kinds of soil and refilling of trenches as per direction of E.I.C.110mm dia U-PUC pipe(4kg/cm2) |
| 97 | 110mm dia P Trap |
| 98 | 110mm dia Nahani Trap |
| 99 | 110mm dia PVC Door Tee |
| 100 | 110mm dia PVC Door Bend |
| 101 | 110mm dia PVC Plain bend |
| 102 | 110mm dia PVC cowl |
| 103 | 75mm dia PVC pipe |
| 104 | 75mm dia PVC Door bend |
| 105 | 75mm dia PVC plain Bend |
| 106 | 125mm dia C.P. Grating |
| 107 | Supplying & fixing of Matrix Set-1 (WB 46X36 with one pair mounting brackets, EWC & cistern complete with fittings & seat cover, one no hinged rail 76 cm and 4 nos of grab rail 60cm complete with all as per specification & direction of the Engineer in charge. |
| 108 | Supplying all materials, labour, T & P and fixing wash basing with hole for pillar taps with C.I./M.S. brackets painted white including holes in walls and making good the damages etc. all complete as per P.H. specification and direction of E.I.C.550mm x 400mm W.H.B. with 32mm dia c.p. west, west pipe , brackets and connection pipe .(make- parryware) |
| 109 | Supplying all materials, labour, T&P and fixing grab bar including cost of all materials complete as per PH specification and direction of Engineer-in-charge. |
| 110 | Supplying all materials, labour T & P and fixing mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden plugs with C.P. screws and washers complete as per P.H. specification and direction of E.I.C.Glass Mirror 600mmx450mm size B.E mirror (fixed type) |
| 111 | Supplying all materials, labour T & P and fixing standard size glass shelf with C.P. brass brackets and guard rail complete fixed to wooden plugs with C.P. screws as per P.H. specification and direction of E.I.C.450mmx125mm size plate Acrylic shelf |
| 112 | Supplying all materials, labour T & P and fixing standard size C.P. towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. screws as per P.H. specification and direction of E.I.C.C.P. Towel Ring |
| 113 | Supplying all materials, labour T & P and fixing standard size C.P. soap holder complete with C.P. Brass brackets fixed to wooden plug with C.P. screws as per P.H. specification and direction of E.I.C. C. P. Soap holder |
| 114 | Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with C.I/M.S brackets paintedwhite including holes in walls and making good the damages etc all complete as per specification and direction of the E.I.C.600x450x200 mm stainless steel kitchen sink (Mousumi make) 40mm dia CP waste ,pvc waste pipe |
| 115 | Supplying all materials labour T & P and fixing Ciramic digital tiles in floors, threads, landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete including cost of precast tiles etc. all complete as per specification and directiof E.I.C. |
| 116 | Supplying all materials labour T & P and fixing porcelain glazed tiles in dados skirting and risers of steps on 12mm thick C.P. (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles including rubbing & polishing complete including cost of tiles etc. all complete as per spcificaiton and direction of E.I.C. |
| 117 | Supplying all materials labour T & P and laying P.V.C. pipe sewer line, Grade-A of the following internal dia in trenches (to level or slope) and jointing with gasket & stiff mixture or C.M. (1:1), C.C. (1:3:6) with 40mm size h.g. metal on bed of the trench and hunching or allround concrete encasing with C.C. (1:4:8) using 40mm size h.g. metal including curing, conveyance to workside, payment of royality, taxes etc. and testing all complete as per approved drawing, specification and direction of E.I.C.110mm dia p.v.c.pipe with hunch top |
| 118 | Supplying all materials, labour, T&P and constructing Leach pit of the following size with 1st class KB brick work in CM (1:4), 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work upto 0.60 mtr deep, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, including earthwork in open well escavation in all kinds of soil and refilling of cavity around the pit, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.0.90m dia x 2.00m Deep |
| 119 | Supplying all materials, labour, T&P and providing gravel backing in the rear of well steining or weep holes of abutments and for deep drains including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C |
| 120 | Supplying all materials,labour,T&P and construction of masonry staging with providing 1st class KB brick work in cm(1:6)of 0.46mtr height in staging,12mm CP in cm(1:6),RCC Beam of 0.25mx0.30m x2.60m in cc(1:1.5:3)using 12mm size HG chips including centering,shuttering, bending and binding of rod etc watering,curring, conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.2000 lits capacity on the roof of 1st floor |
| 121 | Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tankconforming to 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.L and placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 2000Ltr. Capacity Water Storage Tank |
| 122 | Supplying all materials, labour, T & P providing and fixing to wall or ceiling and floor PVC pipe conforming to ASTM-D-1785/89 (sch-80) and pipe fitting of the following nominal bore with clamps including making good the wall, ceiling and floor testing all complete as per specification and direction of E.I.C.25mm diau-PVC pipe(External) |
| 123 | 20mm dia U-PVC pipe(Internal) |
| 124 | Supplying all materials, labour, T & P and fitting & brass/C.P. fittings of the following nominal bore with supply of all jointing materials etc. complete as per P.H. specification and direction of E.I.C.15mm dia C.P. Two way Bibcock (make-Jaguar) |
| 125 | 15mm dia C.P.L.B. Bib cock (make-Jaguar) |
| 126 | 15mm dia C.P.S.B. Bib cock (make-Jaguar) |
| 127 | 15 mm dia CP Bib cock Elbow Action (make-Jaguar) |
| 128 | 15mm dia C.P. Pillar cock(make-Jaguar) |
| 129 | 15mm dia C.P. angle stop cock(make-Jaguar) |
| 130 | 15mm dia Health Faucet & 1.0m long Flexible pipe(make-Jaguar) |
| 131 | 25mm dia U-PVC Ball Valve[Metal Ball] |
| 132 | Aquaguard Storage water cooler with inbuilt purifier with trasportation |
| 133 | 125mmx100mm Size Bore Well Through DTH Method:-Labour for drilling of perfactly vertical bore holes as specified dia.For a specified depth below GL level through consolidated and uncosolidated rock with down the hole hammer drilling rigs or combination drilling rigs(600cfm/200psi)as required to suit the site conditions as per the direction of E.I.C.including use of own rigs with its accessories,tools & plants and consumable etc. for lowering 125mm dia PVC/ GI pipes for house fitted with socket and with or without well screen as per the necessity for the soft, medium,hard & boulder formation(PCV/GI)casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after complete of tube well.(Tube well-1Nos)Drilling of 125mm. dia. Bore-0.00mtr to 30.00mtr=30.00m |
| 134 | Lowering the following G.I/PVC pipe with or without soltted pipes as per necessity from ground level upto 30.00mtr depth and fitted and fixed in perfecty vertical position including cutting and threading pipes and soltted pipes and supplying and fixing of all jointing materials,T&P etc the top of the casing pipe threaded including piping tube well to prevent entry of foreign materials from above(PVC/G.I) supplied by the contractor (including cost of pipe)Lowring of 125mm dia pipes-0.00mtr to 30.00mtr |
| 135 | Cost of 125mm dia PVC casing pipes-0.00m to 30.00m |
| 136 | Cleaning&developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of E.I.C. |
| 137 | Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire = Finollex / L & T/ Anchor/ Havels/ V-Guard/ Greatwhite / Polycab) Group A (1.1.1) |
| 138 | -do- .... Group B (1.1.2) |
| 139 | -do- .... Group C (1.1.3) |
| 140 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required.4 Modular box with base & cover (1.24.3) |
| 141 | 6 Modular box with base & cover (1.24.4) |
| 142 | 8 Modular box with base & cover (1.24.5) |
| 143 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required (1.25.3+1.25.5)+4 MODULE BOX |
| 144 | Wiring for circuit I sub main wiring alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS- 694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required ( Make of wire- Finolex/ / Anchor/ Havels/ V-guard / HPL / L&T / Gratewhite / Polycab). 2x4sqmm +1x1.5sqmm ( 1.8.3 ) |
| 145 | -do-2x2.5sqmm +1x1.5sqmm ( 1.8.2 ) |
| 146 | -do- 2x6sqmm +1x2.5sqmm ( 1.8.4 ) |
| 147 | -do- 4x6sqmm +2x2.5sqmm ( 1.8.10 ) |
| 148 | S/F of 3 ph industrial socket with 32A 4P MCB(Make Havells/Anchor/L&T/V-Guard) |
| 149 | S/F of following 2way single door and neutral sheet steel MCB DISTRIBUTION BOARD 250v on surface /recess complete with tinned copper bus bar, neutral bar, earth bar, din bar ,detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (except MCB) 2.3.1.(b) |
| 150 | S/F of following 8 way Double Door and neutral sheet steel MCB DISTRIBUTION BOARD 250v on surface /recess complete with tinned copper bus bar, neutral bar, earth bar, din bar ,detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (except MCB) 2.3.6 |
| 151 | S/Fof 'C' series SP MCB of 5A to 32 Amp rating 240Volt \\"B\\" series MCB for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP)(2.6.1) |
| 152 | S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (1.25.1+1.25.4) |
| 153 | S/F of 1200mm A.C. Ceiling fan (1Star) with all accessories and connections with out fan regulator (Make:Usha-Striker One/Neo/Crompton- highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White-ALDOUS/Pollycab-Vital HS) |
| 154 | S/F of 60 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection( Make- Crompton / Phillips/ HPL/ Polycab / Havells ) |
| 155 | S/F of 18-25 watt LED Tube light fitting compoete with all connection. including fixing and all accessories as per direction of Engineer-In-charge (Make: Havels / Phillps / Crompton / Polycab / HPL) |
| 156 | Supply of instalation, Testing commissioning of 12 Watt. LED bulb |
| 157 | S/F of 15A modular socket on 2 Modular Metal box for A.C |
| 158 | S/F of 32A C series D.P. MCB for A.C (make: Legrand/Anchor/Havels/HPL) |
| 159 | S/F of 25A Moter Starter switch for A.C (Make: Havells / Anchor/Le-Grand) |
| 160 | SITC of 1.5 Ton 5 star BEE Rating Inverter type split A.C. M/C with all accessories and connections and installation (Make - LG/ O General/Daikin) |
| 161 | S/F of 4KVA Voltage stabilizer(130-300) upto 1.5 Ton AC(Make-Microtech/V-Guard) |
| 162 | S/F of Nylon Netted Drain Pipe with C clamp for AC |
| 163 | SITC of Copper cooling Piping With Insulation and Power Cable for 1.5 Ton Split AC |
| 164 | S/F. of Powder coated Wall Stand for outdoor unit with Anchor Fastener For 1.5 Ton AC |
| 165 | S/F of 300 Exhaust fan with all accessoriesand connections (Make Usha-Aero Clean Plus DBB/ Polycab-Fresh on DBB/ Cropmton-Trans Air12\\" reversible/ Havells-Ventil Air DS(HS)/ Anchor-Anmol Delus R/ Orient-Power Flow DBB) |
| 166 | S/F of 400mm Wall fan with all accessories and connections (Make-Usha-Maxx Air Ultra/Polycab-Arey HS/Cropmton-WM Hiflowave/ Havells-Accelero HS/ Anchor-Altrix HS- OWH/ Orient-Wall43/ Great White-WYNO WF ) |
| 167 | S/F of 2000 VA Inverter with 2 nos. 180 Ah Tubular battery including trally arrangement (Make: Microtake/ Luminous/Exide) |
| 168 | S/F of 900 VA Inverter with 1 no. 180 Ah Tubular battery including trally arrangement (Make: Microtake/ Luminous) |
| 169 | Providing and Fixing of 4.5 Kgs. Capacity CO2 gas type ISI marked fire extinguisher (IS: 15683) fitted with high pressure 1 mtr. Long discharge hose & horn complete with refill gas, carrying handle and wall mounting bracket etc as required.Make-Safex/Fireshield/Ceasefire |
| 170 | Supply of 3.5core 25sqmm PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade Armoured cable ( MAKE-HAVELLS/polycab/RR Kable/Rhino cable) |
| 171 | Laying of 25sq mm. 3½ Core cable on surface(5.5.2) |
| 172 | Laying of 25sq mm. 3½ Core cable in ground(5.1.2) |
| 173 | Supplying and making end termination with brass compression gland and aluminum lugs for 25sq mm. 3½ Core cable(5.8.21) |
| 174 | Supply of 3.5core 35sqmm PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade Armoured cable ( MAKE-HAVELLS/polycab/RR Kable/Rhino cable) |
| 175 | Laying of 35sq mm. 3½ Core cable on surface(5.5.2) |
| 176 | Laying of 35sq mm. 3½ Core cable in ground(5.1.2) |
| 177 | Supplying and making end termination with brass compression gland and aluminum lugs for 35sq mm. 3½ Core cable(5.8.21) |
| 178 | S/F of batten holder BK angle holder ISI marked including connection etc instead of ceiling rose (Make: Cona / Anchor / Havells / Greatwhite / Preeti / HPL) (1.29-1.28) |
| 179 | Supply, Installation testing and commissioning of 63 Amp. IC TPN Main Switches (IS13940 part 3/1993) with supply of metal box of following capacity on existing surface/Wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make: HPL / L&T / C&S / Havells / Seimens / RK / Anchor ) (2.15.3) |
| 180 | 250mmx300mmx100mm deep(1.24.13) for fixing 63Amp ICTPN Main switch. |
| 181 | Earthing with G.I. earth pipe 3 metre long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arragement and watering pipe etc. with charcoal and salt as required.(3.2) |
| 182 | Supply and laying 6 SWG G.I wire in recess for loop earthing as required ( 3.17) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender