Tender For Construction Of D Type Type Quarter For A.E.E, R.W. Sub-Division, Agalpur At Agalpur For The Year 2026-27_Building
Tender Value
52.50 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
5 days left
EMD
52510
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Balangir → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of D Type Type Quarter For A.E.E, R.W. Sub-Division, Agalpur At Agalpur For The Year 2026-27_Building
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation in hard soil within initial lead and lift including rough dressing and breaking clods etc. complete. including dressing and levelling the bed not exceeding 1.50m depth and Depositing the Soil within initial lead of 50m & as per specification approved by the Department. |
| 2 | Providing filling foundation and plinth with sand well watered and rammed with all leads and lifts including cost , conveyance, royality of materials labour . T & P etc. complete as per direction of Er. In Charge. |
| 3 | Cement concrete (1:3:6) with 4cm size hard granite metal of approved quality and approved quarry in foundation including hoisting laying concrete with cost conveyance of materials including watering, curing, royality all T & P required for the work etc. complete as per direction of the Er. in charge. |
| 4 | Fly ash.Brick masonary in cement mortar ( 1:6 )using K.B.Bricks of size 10\\"x5\\"x3\\" having crushing strength between 100 Kg/Cm2 to 149 Kg/Cm2 after immersing the bricks for six hours in water before use in foundation plinth & basement and for ornamental flower beds plinth moulding and similar such type of works with all necessary projections flooring moulding corbelling, champhering watering and curing etc.including cost,conveyance,royalties and all taxes of all materials and cost of all labouir with T&P required for the work etc.complete in all respect as per direction of Engineer-in-charge. |
| 5 | Fly ash.Brick masonary in cement mortar ( 1:6 )using K.B.Bricks of size 10\\"x5\\"x3\\" having crushing strength between 100 Kg/Cm2 to 149 Kg/Cm2 after immersing the bricks for six hours in water before use in superstructure with all necessary projections flooring moulding corbelling, champhering watering and curing etc.including cost,conveyance,royalties and all taxes of all materials and cost of all labouir with T&P required for the work etc.complete in all respect as per direction of Engineer-in-charge. Ground Floor |
| 6 | Providing Reinforcement cement concrete M-25 mix with nominal size stone aggregate in foundation upto a depth of 1.5m below ground level & upto bed level including cost & conveyance of all materials to site & all labour charges complete as per the direction of Engineer in Charge. Foundation, Column Base |
| 7 | Column |
| 8 | 1st Floor |
| 9 | Grade Beam |
| 10 | Wall Beam Ground Floor |
| 11 | 1st Floor |
| 12 | Lintel Ground Floor |
| 13 | 1st Floor |
| 14 | Window Sill Ground Floor |
| 15 | Slab Ground Floor |
| 16 | 1st Floor |
| 17 | Stair case Ground Floor |
| 18 | Chhajja Ground Floor |
| 19 | 1st Floor |
| 20 | Shelve |
| 21 | Providing HYSD bar reinforcement for R.C.C. work including Straightening, cutting, bending, binding, welding, tying the grills, laying and placing in proper position as per approved design and drawing including cost, conveyance of 18 to 20 gauge binding wire cost and conveyance of HYSD bars complete in all respect as per specification for road & Bridge and direction of Eng - in Charge. Ground Floor |
| 22 | Supplying, fitting and fixing Vetrifed tile in floors of size 600mm x 600mm of approved make with application of polymer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints with epoxy grout of approved quality including cost of all materials, labour T&P etc. required for the work etc. complete as per the direction of Engineer in Charge. |
| 23 | Fixing tiles in dados,skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. etc. complete as per the direction of Engineer in Charge. Ground Floor |
| 24 | Fixing kota tiles in treads of steps and landing on 25mm thick bed of cement plaster (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. Ground Floor |
| 25 | Cement concrete in cm (1:2:4) using 12mm size h.g.c.b. chips with all cost conveyancy Royality etc. complete. Ground Floor |
| 26 | Supplying, fitting & fixing of Granite Tiles of minimum Above 0.40 sqm. (20mm thick) of approved make in floors laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-Charge Ground Floor |
| 27 | Fixing chequred tiles in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. Ground Floor |
| 28 | Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. (Rate as per SoR 2022, Page-235) Ground Floor |
| 29 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. (Rate as per SoR 2022, Page-235) Ground Floor |
| 30 | Supplying, Fitting and fixing of iron Grill, Door and window etc. completewith clamps including making good to the wall , ,ceilling and floor all complete as per specification including cost of material with all cost ,conveyance including scaffolding tax,T&P,labour etc complete as per the direction of the Engineer - in -charge. Ground Floor |
| 31 | 12mm(1/2\\") thick cement plaster (1:6)in finished smooth to outside smooth surface of brick walls afrer racking out joints including watering and curing etc.complete with cost,conveyance royalties,all taxes and cost of all materials and cost of all labour with T&P requred for the work complete. as per the direction of Engineer in Charge. Ground Floor |
| 32 | 1st Floor |
| 33 | 16mm(5/8\\") thick cement plaster (1:6)in finished smooth to inside rough surface of 10\\" thick brick walls after racking out the joints including watering and curing with cost, conveyance, royalty, all tax of all materials and cost of all labour with T&P required for the work etc. complete. as per the direction of Engineer in Charge. Ground Floor |
| 34 | 1st Floor |
| 35 | Painting two coat over a coat of primer with approved paint on new work with any approved paint on iron work including cost, conveyance, taxes of all materials, T&P required for the work including cost of paint etc. complete as per direction by the Engineer-in-charge. |
| 36 | Wall Painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint ( For 10 sqmt ) Ground Floor |
| 37 | 1st Floor |
| 38 | Finishing surface of walls with Cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. Ground Floor |
| 39 | 1st Floor |
| 40 | Distempering two coat to walls with distemper of approved shade on new work to give an even shade including cost of Distempering Ground Floor |
| 41 | 1st Floor |
| 42 | Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect. |
| 43 | Providing and fixing rain water down pipe with necessary bend shoes and heads including cost of 75mm dia earthen pipe, clamps and nails etc. with all cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification |
| 44 | Supplying all materials labour T & P and fitting & fixing u-PVC ventilating pipes and fittings of the following O.D. conforming to ISI No. 13592 / 1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method / as per manufacturers specification testing e.w. in excavation in all kinds of soil and refilling of trenches as per direction of E.I.C.110mm dia U-PVC pipe |
| 45 | 110mm dia PVCSWR P Trap |
| 46 | 110mm dia PVCSWR Nahani Trap |
| 47 | 110mm dia PVCSWR D/JN Wiith Door |
| 48 | 110mm dia PVCSWR Door Bend |
| 49 | 110mm dia PVCSWR Offset |
| 50 | 110mm dia PVCSWR Plain bend |
| 51 | 110mm dia PVCSWR cowl |
| 52 | 125mm dia C.P. Grating |
| 53 | Supplying all materials labour T & P and cutting holes through brick masonary walls for taking H.C.I./ PVC and fittings including making good the damages etc. all complete as per P.H. specification and direction of E.I.C. 375mm thick wall |
| 54 | Supplying all materials labour T P and fixing wash down water closet (Anglo Indian water closet) with integral S or P trap to the floor with wooden plug and chromium plated crews including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification and direction of E.I.C.E.W.C. with P Trap with sheet cover |
| 55 | Supplying all materials labour T & P and fixing water closet, squatting pan (Indian type W.C. pan / Orissa pattern squatting pan) duly embedded in C.C. (1:5:10) using 4cm h.g. metal all complete as per the direction of E.I.C.580mm Orissa pan(make -Parryware) |
| 56 | Supplying all materials, labour, T & P and fixing wash basing with hole for pillar taps with C.I./M.S. brackets painted white including holes in walls and making good the damages etc. all complete as per P.H. specification and direction of E.I.C.550mm x 400mm W.H.B. with 32mm dia c.p. west, west pipe , brackets and connection pipe .(make- parryware) |
| 57 | Supplying all materials, labour T & P and fixing mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden plugs with C.P. screws and washers complete as per P.H. specification and direction of E.I.C.600mmx450mm B.E. Mirror |
| 58 | Supplying all materials, labour T & P and fixing standard size glass shelf with C.P. brass brackets and guard rail complete fixed to wooden plugs with C.P. screws as per P.H. specification and direction of E.I.C.450mmx125mm size plate Acrylic shelf |
| 59 | Supplying all materials, labour T & P and fixing standard size C.P. towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. screws as per P.H. specification and direction of E.I.C.25mm x 600mm long C.P. towel rail |
| 60 | C.P. towel Ring |
| 61 | Supplying all materials, labour T & P and fixing standard size C.P. soap holder complete with C.P. Brass brackets fixed to wooden plug with C.P. screws as per P.H. specification and direction of E.I.C. |
| 62 | Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with C.I/M.S brackets paintedwhite including holes in walls and making good the damages etc all complete as per specification and direction of the E.I.C.600x450x200 mm stainless steel kitchen sink (Mousumi make) 40mm dia CP waste ,pvc waste pipe |
| 63 | Providing fitting fixing Al door with anodized Al door section of 9202 as vertical member, 9201 as top, 9200 as bottom and middle member with frame section as 9221 with tapered clip no 4660 and frame to be completed by means of jointing angle no 1855 including cost of labour T&P hire charges of drilling machine labour charges etc complete with cost of laminated board. and as per direction of the Engineer in charge. |
| 64 | Supplying all materials labour T & P and fixing Ciramic digital tiles in floors, threads, landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete including cost of precast tiles etc. all complete as per specification and directiof E.I.C. |
| 65 | Supplying all materials labour T & P and fixing porcelain glazed tiles in dados skirting and risers of steps on 12mm thick C.P. (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles including rubbing & polishing complete including cost of tiles etc. all complete as per spcificaiton and direction of E.I.C. |
| 66 | S.D. PORTION:-Supplying all materials,labour,T&P and constructing inspection chamber of the following sizes with cc(1:3:6)using 40mm size hg metal on bed,1st class KB Brickwork in cm(1:6)moulding and shaping the channel inside and benching with cc(1:1.5:3)using 12mm size hg chips,12mm thick CP(1:3)with punning to inside,cement flushpointing(1:3)to outside,RCC cover slab in cc(1:1.5:3)using 12mm size h.g. chips with RCC man hole cover,e.w. in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,conveyance of all materials to site,payment of royality,taxes etc. all complete as per approved specification and direction of E.I.C.Inside size 760mm x 760mm x 460mm |
| 67 | Supplying all materials labour T & P and laying P.V.C. pipe sewer line, Grade-A of the following internal dia in trenches (to level or slope) and jointing with gasket & stiff mixture or C.M. (1:1), C.C. (1:3:6) with 40mm size h.g. metal on bed of the trench and hunching or allround concrete encasing with C.C. (1:4:8) using 40mm size h.g. metal including curing, conveyance to workside, payment of royality, taxes etc. and testing all complete as per approved drawing, specification and direction of E.I.C.110mm dia p.v.c.pipe with hunch top |
| 68 | Supplying all labour T & P and constructing soakway pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B. Brickwork in C.M.(1:6) for the remaining height at top, 12mm thick C.P. (1:4) inside and outside over masonary brick work, gravel packing in the rear of well steining R.C.C. cover slab in C.C. (1:1.5:3) using 12mm size h.g. chips fitted handles including e.w. in open well excavation in all kinds of soil and refilling the cavity around the pit & painting the iron works, wattering, curing, conveyance of all meterails to worksite, payment of royality, taxes etc. all complete as per approved drawing, specification and direction of E.I.C.1.20m dia x 2.00m deep soak pit. |
| 69 | Earth work in all kinds of soil in excavation of foundation trenches within 50m initial lead including rough dressing and breaking clods to maximum 5cm to 7 cm and laying in layers not exceeding 0.30m in depth as per direction of E.I.C.Initial lift upto 1.50m |
| 70 | From 1.50m to 3.00m depth |
| 71 | Supplying all materials labour T & P and filling foundation and plinth with river sand well watered and rammed including conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per the direction of E.I.C. |
| 72 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalry, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 73 | Supplying all materials labour T & P and providing C.C. (1:1.5:3) using 12mm h.g. chips including watering, curing, conveyance of all materials to work site, payment of royality, taxes etc. all complete as per specification and direction of E.I.C. |
| 74 | Supplying all materials labour T & P and providing brick work with Flyash Brick work in c.m.(1:4) F & P having crushing strength not less than 75kg. / c.m2 with dimensional tolerance +/- 8% including watering, curing conveyance all materials to worksite payment of royality taxes etc. all complete as per specification direction of E.I.C. |
| 75 | Supplying all materials labour T & P and providing rigid and smooth centering & shuttering for R.C.C. works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per specification and direction of E.I.C |
| 76 | Supplying all materials labour T & P and providing M.S. reinforcement for R.C.C. works including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per specification and direction of E.I.C. |
| 77 | Supplying all materials labour T & P and providing R.c.c (1:1.5:3) .using 12mm h.g. chips for R.C.C. works including hoisting, laying, watering, curing, conveyance of all materials to work site, payment of royality, taxes etc. all complete as per specification and direction of E.I.C |
| 78 | Supplying all materials, labour T & P and providing 12mm thicks C.P. (1:3)with punning on brick / stone work including watering, curing conveyance of all materials to work site, payment of royality, taxes etc. all complete as per specification and direction of E.I.C. |
| 79 | Supplying all materials labour T & P and fixing of R.C.C. baffle wall precast with C.C. (1:1.5:3) using 12mm b.h.g. chips and fitted to septic tank as per P.H. specification and direction E.I.C. |
| 80 | Supplying all materials, labour, T & P and providing fitting & fixing PVC Tee in wall including fitting the necessary with cement concrete (1:1.5:3) with 12mm size h.g. chips all complete including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per specification and direction of E.I.C.(a) 110mmx110mm x110mm p.v.cTee |
| 81 | Supplying all materials labour T&P and Providing cement flush pointing (1:3) to brick masonary including watering, curing, conveyance of all materials to work site etc. all complete as per specification and direction of E.I.C. |
| 82 | Supplying all materials labour T& P and providing 500 x 500 x 100mm thick RCC precast M.H cover in C.C (1:1.5:3) using 12mm h.g. chips placing the cover on the MH/S tank & finishing smooth all complete as per specification and direction of E.I.C |
| 83 | Filling in foundation & plinth with excavated materials, including watering, and ramming as per direction of E.I.C. |
| 84 | W/S. PORTION:-Supplying all materials,labour,T&P and construction of masonry staging with providing 1st class KB brick work in cm(1:6)of 0.46mtr height in staging,12mm CP in cm(1:6),RCC Beam of 0.25mx0.30m x2.60m in cc(1:1.5:3)using 12mm size HG chips including centering,shuttering, bending and binding of rod etc watering,curring, conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.1000 lits capacity on the roof of 1st floor |
| 85 | Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tankconforming to 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.L and placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.1000Ltr. Capacity Water Storage Tank |
| 86 | Supplying all materials, labour, T & P and fitting & fixing 10 ltr. capacity low level flushing cystern with a pair of clamps complete with fittings 32mm dia p.v.c. flush bend, 15mm dia, pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cystern and closet and connecting inlet pipe with supply main etc. all connecting inlet pipe with supply main etc. all complete as per specification and direction of E.I.C. 10Ltr. Capacity lowlevel cistern |
| 87 | Supplying all materials, labour, T & P providing and fixing to wall or ceiling and floor PVC pipe conforming to ASTM-D-1785/89 (sch-80) and pipe fitting of the following nominal bore with clamps including making good the wall, ceiling and floor testing all complete as per specification and direction of E.I.C.50.mm dia C-PVC pipe(External) |
| 88 | 32mm dia C-PVC pipe(External) |
| 89 | 20mm dia C-PVC pipe(Internal) |
| 90 | Supplying all materials, labour, T & P cutting holes through brick / stone masonry works including making good the damages in c.m. (1:4) for taking G.I./PVC pipe & fitting etc. all complete as per PH specification and direction of E.I.C.250mm thick wall (Ground Floor) :- |
| 91 | Supplying all materials, labour, T & P and cutting grooves in pucca floors and walls for taking G.I. / PVC pipes and making good the damages as per direction of E.I.C. |
| 92 | Supplying all materials, labour, T & P and fitting & brass/C.P. fittings of the following nominal bore with supply of all jointing materials etc. complete as per P.H. specification and direction of E.I.C.(plaza/Amber ) 15mm dia C.P.L.B. Bibcock |
| 93 | 15mm dia C.P. Two way Bibcock |
| 94 | 15mm dia C.P. Pillar cock with swan neck |
| 95 | 15mm dia C.P. angle stopcock |
| 96 | 15mm dia C.P. wall mixture(3-in-1) |
| 97 | 15mm x100mm C.P. Shower with Arm Revolving bend type |
| 98 | 15mm dia Health Faucet & 1.0m long Flexible pipe |
| 99 | 50mm dia U-PVC Ball Valve[Metal Ball] |
| 100 | 15mm dia C.P. Extension Piece |
| 101 | 15mm dia C.P. Flange |
| 102 | Supplying all materials, labour, T & P and fitting and fixing of I.S.I. mark 1H.P. single phase vertical water cool submersible pump set with discharge1800/2200Lit./Hour & a head-55/70mtr.of reputed make (C.R.I./ K.S.B./Texmoor Equivelent) Including cost conveyance and taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 103 | Supplying all materials, labour, T & P and fitting & fixing of 1.0H.P. single phase vertical submersible pump set with commissioning and testing etc. all completes as per P.H. Specification and direction of E.I.C. |
| 104 | Supplying all materials, labour, T & P and fitting & fixing of I.S.I. mark D.O.L. starter of reputed make like B.C.H. or equivalent for 1HP single phase vertical submersible pump set including all cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 105 | Supplying all materials labour T& P and fitting & fixing of 1.5mm2 3core copper flat suitable cable having I.S.I. mark of reputed company like B.C.H./ Finolex or equivalent & connecting the pump starter including cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 106 | Supplying all materials labour T& P and fitting & fixing plastic rope with MS well cover, M.S. Clamp,stainless steel short piece, Bend & socket, union including all cost conveyance & taxes etc. all completes as per P.H. Specification direction of E.I.C. |
| 107 | Supplying all materials labour T& P and fitting & fixing of H.D.P.E. pipes and pipe fittings with making connection to pump set including all cost conveyance & taxes etc. all completes as per P.H. Specification direction of E.I.C.32mm dia H.D.P.E. pipe |
| 108 | 200mmx125mm Size Bore Well Through DTH Method:-Labour for drilling and perfectly vertical bore hole of specified dia. For a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs as required suit the site condition as per the direction of E.I.C. including use of own rigs with its accessories , tools & plants and consumable etc. for lowering of 125mm dia. P.V.C. pipes for housing fitted with sockets with or the necessity for soft , medium , hard and boulderwith out well screen as per formation (G.I/P.V.C.)casing pipes if required to prevent collapse over burden is to be provided by the contractor including lowrering and withdrawing after completion of the tubles as per direction of E.I.C.Drilling of 200mm. dia. Bore omtr to 40mt |
| 109 | Drilling 150mm dia. Bore 40 mtr to 140mtr& above |
| 110 | Lowering the folloing size G.I./ P.V.C. pipes with without slotted pipes as per the necessary from ground level up to 30mtrs. Depth and fitted and fixed up in perfectly vertical position including cutting, and threading pipe and slotted pipe and supply and fixing all jointing materials tools and plants etc. complete and keeping the top plugging tube wells to prevent entry of foreign materials from aboveLowring of 200 mm dia pipes |
| 111 | Cost of 200 mm dia P.V.C. casing pipe |
| 112 | Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of E.I.C |
| 113 | Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire = Finollex / L & T/ Anchor/ Havels/ V-Guard/ Greatwhite / Polycab) Group A (1.1.1) |
| 114 | -do- .... Group B (1.1.2) |
| 115 | -do- .... Group C (1.1.3) |
| 116 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required.4 Modular box with base & cover (1.24.3) |
| 117 | 8 Modular box with base & cover (1.24.5) |
| 118 | S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (1.25.1+1.25.4) |
| 119 | S/F of 6 Modular GI box in recess with suitable size of Modular base cover in front including providing and fixing 2 nos 3 pin 5/6 amp. Modular Socket out let & 5/6amp. Modular type switch,connection,painting etc. as required.(2X1.25.1+2X1.25.4)+6 MODULE |
| 120 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required (1.25.3+1.25.5)+4 MODULE BOX |
| 121 | Wiring for circuit I sub main wiring alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS- 694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required ( Make of wire- Finolex/ / Anchor/ Havels/ V-guard / HPL / L&T / Gratewhite / Polycab). -do- 2x1.5sqmm +1x1.5sqmm ( 1.8.1 ) |
| 122 | -do-2x2.5sqmm +1x1.5sqmm ( 1.8.2 ) |
| 123 | -do- 2x4sqmm +1x1.5sqmm ( 1.8.3 ) |
| 124 | Supply, Installation testing and commissioning of 63 Amp. ICDP Main Switches (IS13940 part 3/1993) with supply of metal box of following capacity on existing surface/Wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make: HPL / L&T / C&S / Havells / Seimens / RK / Anchor / Havells) (2.15.a) |
| 125 | 250mmx300mmx100mm deep(1.24.13) for fixing 63Amp ICDP Main switch. |
| 126 | S/Fof 'C' series SP MCB of 5A to 32 Amp rating 240Volt \\"B\\" series MCB for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP)(2.6.1) |
| 127 | S/F of following 8 way Double Door and neutral sheet steel MCB DISTRIBUTION BOARD 250v on surface /recess complete with tinned copper bus bar, neutral bar, earth bar, din bar ,detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (except MCB) 2.3.6 |
| 128 | S/F of Call bell/ Buzzer ISI marked sutiable for DC/AC single Phase 230 volts complete as required.(1.30) |
| 129 | S/F of batten holder BK angle holder ISI marked including connection etc instead of ceiling rose (Make: Cona / Anchor / Havells / Greatwhite / Preeti / HPL) (1.29-1.28) |
| 130 | Earthing with G.I. earth pipe 3 metre long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arragement and watering pipe etc. with charcoal and salt as required.(3.2) |
| 131 | Supply and laying 6 SWG G.I wire in recess for loop earthing as required ( 3.17) |
| 132 | SITC of 1200 mm sweep A.C Ceiling fan (1 Star) copper winding with Aluminum blades having air delivery 225 m/min without fan regulator (Make: Usha-Striker Neo/Crompton-HS/Havells-Samrat ES/Anchor-Turbo Speed Star/Orient-Summer Breeze Pro/Great White-ALDOUS/Polycab-Vital HS) including wiring, the down rod of standard length (upto 30cm) with 1.5 sq. mm PVC insulated single core multistrand copper conductor etc. as required as per direction of Engineer-in-charge Replacement Warranty will be two years. |
| 133 | S/F of electric step ceiling fan regulater in existing switch box including connection with 1.5sqmm FR PVC insulated single core multistrand copper conductor earthing the regulator as required.(1.25a) |
| 134 | S/F of Fan hok S'type made of 16mm MS rod as per specificationn |
| 135 | S/F of 60 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection( Make- Crompton / Phillips/ HPL/ Polycab / Havells ) |
| 136 | S/F of 18-25 watt LED Tube light fitting complete with all connection. including fixing and all accessories as per direction of Engineer-In-charge (Make: Havels / Phillps / Crompton / Polycab / HPL) |
| 137 | Supply of instalation, Testing commissioning of 12 Watt. LED bulb(Make: Havels / Phillps / Crompton / Polycab / HPL) |
| 138 | S/F of 6 pin 15A modular socket on 2 Modular Metal box for A.C (1.25.5) |
| 139 | S/F of 32A C series D.P. MCB for A.C (make: Legrand/Anchor/Havels/HPL) |
| 140 | S/F of 25A Moter Starter switch for A.C (Make: Havells / Anchor/Le-Grand) |
| 141 | SITC of 300 mm double ball bearing with metal body Exhaust fan copper winding having air delivery 1600 m min. (Make Usha-Aero Clean Plus DBB/Polycab-Fresh on DBB/Crompton-Trans Air 12\\" reversible/Havells-Ventil Air DS(HS)/Anchor-Anmol Delius R/Orient-Power Flow DBB) with all accessories and connection etc. as required as per direction of Engineer-in-charge, Replacement Warranty will be two years. |
| 142 | SITC of 400mm Wall fan copper winding with metal blades having air delivery 70 m /min. (Make-Usha-Maxx Air Ultra/Polycab-Arey HS/Crompton-WM HiFlowwave/Havells-Accelero HS/Anchor-Altrix HS-OWH/Orient-Wall43/Great White-WYNO WF) with all accessories and connection etc. as required as per direction of Engineer-in-charge, Replacement Warranty will be two years. |
| 143 | S/F of 2000 VA Inverter with 2 nos. 180 Ah Tubular battery including trally arrangement (Make: Microtake/ Luminous/Exide) |
| 144 | wiring to sub main with 1*1.5 mm2 single core multi strand copper wire for inverter wiring (1x1.5mm) |
| 145 | Supply and installation of 7 mtr long hot dip galvanized Octagonal pole having base dia of 175 mm and top dia of 70 mm and plate thickness of 4 mm or more complete with base plate of 250x250x16mm and 4 nos. Jtype En 8 grade foundation bolts M24X750mm to withstand 180 KM / HR wind speed considering the weight. Solar lights fixed on the top of the pole for AIO Integrated Solar lights . One no of AIO Solar lights at a height of 7 mtr above ground .Both the Octagonal pole, En8 grade fdn bolts and bracket must be manufactured in the Octagonal pole manufacturing company. ( Bracket & En8 grade Fdn bolts manufactured by third party pole supplier/manufacturer shall not be acceptable).The necessary test reports of Octagonal Pole and EN8 grade fdn bolts must be submitted by the manufacturer for acceptance of product/TDS approval prior to start of the work.The pole manufacturer must submit the confirmation regarding 10 years or more design life of the pole.Construction of RCC foundation by using M20 grade RCC and Fe 415 grade reinforcement in the foundation by considering the SBC as 10 T per sq mtr and fixing the 4 nos. fdn bolts in that foundation for installation of pole with Solar light on that foundation. The work shall be excuted as per the direction of EIC. Installation of Octagonal Poles and fixing of 1 no AIO solar light in the bracket by using suitable machinery adopting all the safety precaurtions as per the direction of EIC. Make : - Utkarsh/RR Ispat/Vakrangee) |
| 146 | Supply,installation,testing and commissioning of 40 W AIO Solar street lights having 100 Wp or more highly efficient Monocrystalline PV module & 12.8 V 42 Ah or more ( Lithium Ferrophosphate (LiFePo4) Battery having BIS ) which shall be inside the extruded aluminium luminaire housing (Theft retardant type), MPPT charge controller having > 92% efficiency & PIR Sensor. The initial lumen output of AIO street light shall be> 6400 lumen or more in CCT 6000K (+/-500K) (Lumen efficacy of 160 lm/w ) as per LM 79 report of NABL lab . The LED chip will be of OSRAM/NISCHIA/CREE/SEOUL Semiconductor only and should be with lenses for effective lighting distribution. The complete system & BMS should be designed to provide 2 days (24 Hrs) back up in dimming mode by activating PIR sensor and battery should be kept inside the luminaire and Mono Crystalline Panel (Made in India ) to be mounted on the top of the luminaire housing. The luminaire must be having IP 66 protection for critical component like (LED compartment, Driver compartment & Battery) . The AIO street light is having IK 08 .The luminaire should have the provision the tiltable/ adjustable mounting bracket to mount it on the top of the pole directly. Warranty on the AIO street lights must be 5 years .The solar lighting company must submit the warranty certificate in the department by mentioning 5 years warranty on complete lighting system against manufacturing defects. Solar lighting company has to repair/replace the lighting system if required against the manufacturing defect till compleiton of warranty period. The Agency/Contractor has to maintain the lighting system till the completion of warranty period by considering the periodical maintenance like panel cleaning in regular interval and rectifying the defect by engaging labour/machinery to make the lighting system operative till warranty period. The agency/contractor must submit declaration for maintaining the system till warranty period .The following test reports/certifications must be submitted for the technical acceptance of the products .1. LM 79 REPORT NABL lab ) , 2. IK 08 (Report of NABL lab ), 3. IP 66 Report of NABL lab (The necessary test reports of NABL lab against the above must be submitted for any wattage of Solar Street lights for acceptance of product/TDS approval prior to start of the work. All the test reports must be in the name of Solar Lighting Company (Make:Crompton/Havells/Panasonic/Philips/Wipro) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender