Tender For Improvement To Service Road Of Sakosingha Distributary From Rd 0.00 Km To 0.90Km And 4.75Km To 5.75Km, Ghunchapal Minor From Rd 0.90Km To 2.00Km, Jarasingha Minor And Angul Main Canal From Rd 5.00Km To 6.00Km Of Derjang Irrigation Project.
Tender Overview
Project Description
Tender for Improvement To Service Road Of Sakosingha Distributary From Rd 0.00 Km To 0.90Km And 4.75Km To 5.75Km, Ghunchapal Minor From Rd 0.90Km To 2.00Km, Jarasingha Minor And Angul Main Canal From Rd 5.00Km To 6.00Km Of Derjang Irrigation Project.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shurbs, saplings and trees girth upto 300mm removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned, up to a lead of 1000metres including removal and disposal of top organic soil not exceeding 150mm in thickness including cost of all labour, T&P with all cost of incidental charges and cess etc complete as per approved specification and direction of the Engineer -in- Charge. |
| 2 | Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified materials with all lifts and leads upto 1000m with cost of all labour, T&P with all cost of incidental charges and cess etc. complete as per approved specification and direction of the Engineer -in- Charge. |
| 3 | Scarifying the existing granular road surface to a depth of 50mm and reusing of scarified materials with all lifts and leads upto 1000m with cost of all labour, T&P with all cost of incidental charges and cess etc. complete as per approved specification and direction of the Engineer -in- Charge. |
| 4 | Loosening, levelling and compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in table 300-2 for embankment construction & clause 305 of MoSRT&H Specification for Road & Bridge works(4th Revision) with cost, conveyance, royalty, taxes of all materials and cost of all labour, T&P with all cost of incidental charges and cess etc. complete as per approved specification and direction of the Engineer -in- Charge.. |
| 5 | Earthwork Excavation in foundation by mechanical means in all kinds of soil including stoney earth, gravel and moorum etc interspread with boulders upto 1/2 cum size with all leads & lift including loading, unloading and carriage by mechanical means including trimming of slopes and bed to design section and depositing the excavated materials away from work site as per the specification and as directed by the Engineer-in-charge within an initial lead of 1km from the place of excavation complete. |
| 6 | Construction of embankment with approved material obtained from roadway cutting and excavation of drain & foundation of other structures with all leads and lifts,spreading, grading to required slope and compacting to meet requirement of table 300-2 & Clause 305 of MoRT&H specification for road and Bridges works (4th Revision) with cost, conveyance, royalty, taxes of all materials and cost of all labour, T&P with all cost of incidental charges and cess etc. complete as per approved specification and direction of the Engineer -in- Charge. |
| 7 | Construction of embankment with approved material obtained from borrowpits with all leads & lifts, transporting to site by mechanical means within a lead of 5Kms, spreading, grading to required slope and compacting to meet requirement of table 300-2 & clause 305 of MoSRT&H Specification for Road & Bridge works(4th Revision) with cost, conveyance, royalty, taxes of all materials and cost of all labour, T&P with all cost of incidental charges and cess etc. complete as per approved specification and direction of the Engineer -in- Charge. |
| 8 | Construction of granular sub-base by providing close graded Granular sub-base Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (4th Revision) with cost, conveyance, royalty, taxes of all materials and cost of all labour, T&P with all cost of incidental charges and cess etc. complete as per approved specification and direction of the Engineer -in- Charge. |
| 9 | Providing, laying, spreading and compacting stone aggregates of IRC- Grade-II ( 63mm to 45 mm ) to water bound macadam specification including spreading in uniform thickness, hand picking, rolling with 3 wheeled steel roller 8-10 tonnes in stages to proper grade and camber, applying, and brooming requisite type of screening/blinding materials to fill up the interstics of coarse aggregate, watering and compacting to the required density complete as per Clause 404 of MoRT&H Specifications for road & Bridge works(4th. Revision) including cost, conveyance, royalty, taxes of all materials, hire and running charges of machinaries, cost of all labour, T&P with all cost of incidental charges and cess etc. complete as per approved specification and direction of the Engineer -in- Charge. |
| 10 | Providing, laying, spreading and compacting stone aggregates of I.R.C Gr-III metal (53 mm. to 22.40 mm) for compacted thickness of 75mm sizes to water bound macadam specification including spreading in unifrom thickness, hand packing, rolling with 3 wheeled steel roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse agreegate, watering and compacting to the required density as per Clause 404 of MoRT&H Specifications for Road & Bridge works(4th. Revision) including cost, conveyance, royalty, taxes of all materials, hire and running charges of machinaries, cost of all labour, T&P with all cost of incidental charges and cess etc. complete as per approved specification and direction of the Engineer -in- Charge. |
| 11 | Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer @ 0.60kg/sqm using mechanical means including cost, conveyance, taxes of all materials, cost of all labour, T&P with all cost of incidental charges and cess etc. complete as per drawing, specification and direction of the Engineer-in-charge. |
| 12 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor @ 0.30kg/sqm on the prepared bituminous/granular surface cleaned with machanical broom including cost, conveyance, taxes of all materials, cost of all labour, T&P with all cost of incidental charges and cess etc. complete as per drawing, specification and direction of the Engineer-in-charge. |
| 13 | Providing and laying bituminous macadam Grade - II with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 3.3 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 504 complete in all respects with cost conveyance, royalty, taxes of all material and cost of all labour, T.& P. workers well fare cess etc. complete as per approved specification and direction of the Engineer -in- Charge. |
| 14 | Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @4.5 to 5 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 508 complete all respects cost, conveyance, royalty, taxes of all materials and hire & running charges of machineries, cost of all labour, T&P with all cost of incidental charges and cess etc. complete as per drawing, specification and direction of the Engineer-in-charge. |
| 15 | Providing granular sub-base using admixture of sand & moorum in proportion (2:3) to road surface including spreading in uniform thickness including watering and rolling with PRR including cost, conveyance, royalty, taxes of all materials, hire and running charges of machinaries, cost of all labour, T&P with all cost of incidental charges and cess etc. complete as per approved specification and direction of the Engineer -in- Charge. |
| 16 | Filling foundation and plinth with clean coarse sand, well watered and rammed including cost, conveyance, royalty, taxes of all materials, hire and running charges of machineries, cost of all labour, T&P with all cost of incidental charges and cess etc. complete as per approved specification and direction of the Engineer -in- Charge. |
| 17 | Providing and laying PCC / RCC of M-15 grade using 40 mm down graded size hard granite crusher broken chips of approved quality, colour and texture free from weathered & skinned and sharp sand of approved quality from approved quarry, mixing, hoisting, lowering and laying in position, compacting and curing for specified days including cost, conveyance, royalty, taxes of all materials, hire and running charges of machinaris, cost of all labour, T&P with all cost of incidental charges and cess etc. complete as per approved specification and direction of the Engineer -in- Charge. |
| 18 | Providing and laying RCC / CC of M-20 grade using 20 mm down graded size hard granite crusher broken chips of approved quality, colour and texture free from weathered & skinned and sharp sand of approved quality from approved quarry, mixing, hoisting, lowering and laying in position, compacting and curing for specified days including cost, conveyance, royalty, taxes of all materials, hire and running charges of machineries, cost of all labour, T&P with all cost of incidental charges and cess etc. complete as per approved specification and direction of the Engineer -in- Charge. |
| 19 | Providing formwork for concrete with F1 finish for upstream faces of dam, spillway, glacis of barrages, unexposed surfaces of foundation, block, joints etc with steel shutters rigidly fixed and removal of rooms and making good to the surfaces where necessary complete including cost, conveyance, taxes of all materials, cost of all labour, T&P with all cost of incidental charges and cess etc. complete as per approved specification and direction of the Engineer -in- Charge. |
| 20 | Providing & laying of filter media with stone crushed agreegates of 45mm size satisfying the requirements laid down in clause 2504.2.2 of MoRTH specifications to thickness of not less than 600mm with smaller size towards the soil bigger size towards wall and provided over the entire surface behind abutment wing wall and return wall to the full height compacted to a firm condition including cost, conveyance, royalty, taxes of all materials, hire and running charges of machinaries, cost of all labour, T&P with all cost of incidental charges and cess etc. complete as per approved specification and direction of the Engineer -in- Charge. |
| 21 | Supplying, fitting & placing uncoated HYSD bar confirming to IS :1786 reinforcement (inclusive of over lap & westage) for R.C.C. work including cutting, bending, binding and tying the grills and placing in correct position including cost, conveyance, taxes of HYSD bars & binding wire of 18 to 20 gauge including cost, conveyance, taxes of all materials, cost of all labour, T&P with all cost of incidental charges and cess etc. complete as per approved specification and direction of the Engineer -in- Charge. |
| 22 | Providing weep holes in Brick masonry /Plain / Reinforced concrete abutment, wing wall / return wall using 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce at regular interval including cost, conveyance, taxes of all materials and cost of all labour, T&P with all cost of incidental charges and cess etc. complete as per approved specification and direction of the Engineer -in- Charge. |
| 23 | Filling foundation and plinth with excavated materials laying in layers not exceeding 0.30M in depth including well watered and rammed including cost of all labour, T&P with all cost of incidental charges and cess etc. complete as per approved specification and direction of the Engineer -in- Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender