Tender For Improvement Of Service Road With Black Topping Of Chhenagaon Distributary From Rd 00 M To 2500 Maintenance and repaird 5000 M To 7500 M And Gurjimunda Minor From Rd 00M To 3400 M Under Right Canal Division- Ii, Junagarh.
Tender Overview
Project Description
Tender for Improvement Of Service Road With Black Topping Of Chhenagaon Distributary From Rd 00 M To 2500 Maintenance and repaird 5000 M To 7500 M And Gurjimunda Minor From Rd 00M To 3400 M Under Right Canal Division- Ii, Junagarh.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5m and lead upto 1000m as per Technical Specefication clause 302.3.11 |
| 2 | Earth work excavation in Hard soil with all lead of 50 M and initial lift of1.50 M Including rough dressing and breaking clods to maximum 5 CM to 7 CM size and laying in layers not exceding 0.30 M in depth and as per the direction of E.I.C. (Filling earth) |
| 3 | Collecting, supplying and laying of granular sub-base in layers not exceeding 100 mm watering and 3 compacting to the required density in OMC with PRR including cost and conveyance of sub-base materials etc. complete as per direction of Engineer-in-Charge. (Sand & Moorum) |
| 4 | Collecting, supplying and laying moorum in layers not exceeding 100mm watering & compacting to the required dencity in O.M.C. with PRR including cost and conveyance of moorum etc complete as directed by the Engineer in charge |
| 5 | Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver etc complete as directed by the Engineer-in-charge. |
| 6 | Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means.etc complete as directed by the Engineer-in-charge. |
| 7 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom etc complete as directed by the Engineer-in-charge. |
| 8 | Providing and laying bituminous macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface etc complete as directed by the Engineer-in-charge. |
| 9 | Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, etc complete as per direction of the Engineer-in-charge. |
| 10 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 The finished surface to be level, uniform applied and completed as per the Engg in Charge |
| 11 | Earth work in excavation in hard soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-charge |
| 12 | Providing and filling sand with good river course sand and well-watered & rammed etc. complete as per the direction of Engineer-in-charge |
| 13 | Cement concrete M-15 grade with crushed grinite course aggregate of size 20mm down graded of approved quality mixing by concrete mixture placing manually and compacted with vibrater including cost, ocnveyance, royalty and taxes of all materials etc complete as directed by the E.I.C |
| 14 | Providing Form work for concrete with F1 finishing using steel shutter plates of aproved specification for surfaces not porminently or permanently exposed to public view including supply of all materials. T & P labour and transportation of all materials etc. complete as directed by the Engineer-in-charge. |
| 15 | Filling the foundation & plinth with excavated materials including watering and ramming, etc. complete as directed by the Engineer-in-charge. |
| 16 | Providing weep holes in Brick masonary/Plan/Rainforced Concrete abutment, wing wall/ Return wall with 50mm día P.V.C. Pipe, extending through the full width of the strutures with slope of 1v:20H to-wards drawing face etc. complete as per drawing & technical spacification.etc complete as per direc-tion of Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender