Tender For Improvement To Road On Gopalpur Akhadasahi Oae From Rd 17280M To 18430M.
Tender Value
60.77 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
3 days left
EMD
60800
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kendrapara → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement To Road On Gopalpur Akhadasahi Oae From Rd 17280M To 18430M.
BOQ
| Sl. No. | Item Description |
| 1 | Quarrying, Collecting and supplying of approved quallity IRC Grade-II metal from approved quarry including cost,carriage,royality & all other taxes of all materials etc.Laying, spreading & compacting stones aggregate of specific size to water bound macadam specification including spreading in uniform thickness,hand packing rolling with 3 wheeled steel roller 8-10 ton in stage to proper grade and camber applying brooming requisite type screening, binding materials to fill up to the interstices coarse aggregate waterring & compacting to the required density per clause 404 of MOSRT & H specification of road & bridge works etc. complete( 5th Revision )output 360cum. |
| 2 | Quarrying, Collecting and supplying of approved quallity IRC Grade-III metal from approved quarry including cost,carriage,royality & all other taxes of all materials etc.Laying, spreading & compacting stones aggregate of specific size to water bound macadam specification including spreading in uniform thickness,hand packing rolling with 3 wheeled steel roller 8-10 ton in stage to proper grade and camber applying brooming requisite type screening, binding materials to fill up to the interstices coarse aggregate waterring & compacting to the required density per clause 404 of MOSRT & H specification of road & bridge works etc. complete( 5th Revision )output 360cum. |
| 3 | Quarrying, Collecting, Conveying from stack and spreading sand & crusher dust 40:60 proportionate for Sub Base laying in layer not exceeding 100 mm thick watering and compacting to the required density with PRR including cost,carriage,royality of materials as per direction of Engineer-in-charge. |
| 4 | Providing and applying Primer Coat with bitumen emulsion on prepared surface of granular base including clearing of road surface & spraying primer at the rate of 0.60kg/sqm using mechanical means including all cost, carriage, royality, taxes of materials etc. complete as per the direction of the Engineer-in-charge. |
| 5 | Providing laying 20mm thick premix carpet including surface dressing after spreading clearing road surface using 0.27 cum of 13.2mm to 5.60mm C.B.H.G. chips of 10sqm with 14.60 Kg of bitumen for pre coating 9.07kg of bitumen for tack coat conveying chip from stacking yard feeding into hot bitumen mixture heating bitumen into required temperature conveying hot binder to required quantity to ensure rough per-coating chips from the mixture and laying the same including hand packing to proper camber and consolidation with PRR including hire & running charges of PRR, bitumen mixture,tar boiler and all other T&P articles including cost,carriage,royality and all taxes of chips,bitumen and all required materials etc.complete as per Specification and direction of Engineer-in-charge. |
| 6 | Providing and applying tack coat with bitumen at the rate of 0.30 kg per sqm on the prepared surface cleaned with mechanical broom including cost of bitumen, boiler and all other T & P article etc complete as per the direction of Engineer-in-charge. |
| 7 | Providing for laying 6.00mm thick pre-coated seal coat using 0.06 cum of 6.70mm size C.B.H.G. chips and down graded as per sieve analysis MOS & TS specification on road works and 6.8kg of bitumen for 10sqm and consolidation with PRR including of hire and running charges of PRR , bitumen mixture, tar boiler and all other T&P articles including cost, carriage, royalty and all taxes of chips, bitumen and all required materials etc. complete. as per the direction of Engineer-in-charge. |
| 8 | Binding road surface with sand 6mm thick including cost, carriage, royality of materials as per the direction of Engineer-in-charge |
| 9 | Quarrying,Collecting, supplying and stacking of good quality moorum in regular box heap size of 1.50m X 1.50m X 0.50m to be measured as one cum and conveying from stacks, spreading the same in sub base in layers not exceeding 100mm thick and compacting to the required density with PRR with all leads , lifts and delifts including cost,conveyance, royalty,cess, taxes of all materials,hire & charges of T&P materials required for the work,watering etc complete as per specification and direction of the Engineer-in-Charge. |
| 10 | Earth work in all kinds of soil from borrow area by mechanical / manual means with all leads, lifts and delifts including loading and unloading in to the transportation vehicles within a lead of 5Km. and depositing the same on properly prepared and scientifically approved surface including rough dressing and breaking the clods to maximum 5cm. to 7cm., laying in layers not exceeding 22.50cm including removal of roots, shrub jungles, bushes and all foreign debries from the earth and benching the old embankment, sectioning, cambering the earth work, watering with required quality control test including construction, maintenance, watering, dewatering and lighting of haul roads and borrow area including mobilization and demobilization of men and machineries and all incidental charges required for the completion of work with T&P articles required for the work, complete in all respect including cost of royalty and all other taxes with labour cess as per approved drawing, specification and direction of the Engineer-in-Charge. ( Measurement shall be taken on finished level section. Borrow area is to be arranged by the agency at his own cost and responsibility ) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender