Tender For Provn Of 18 X Security Lights For Guard Post Against Job No 01/Rev Wk/112 Ta/2026-27 And Provn Of 03 X Refrigerators Of 300 Ltr Capacity Against Job No W/Mw-01/2026-27 At Khundru Grn Under Ge 861 Ews
Tender Value
11.18 Lakhs
Estimated cost
Bid Submission
10 Dec 2026
22 days left
EMD
22400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of 18 X Security Lights For Guard Post Against Job No 01/Rev Wk/112 Ta/2026-27 And Provn Of 03 X Refrigerators Of 300 Ltr Capacity Against Job No W/Mw-01/2026-27 At Khundru Grn Under Ge 861 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, cable, pipes etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-charge. |
| 2 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick, in any type of soil complete all as specified and as directed by Engineer-in-Charge. |
| 3 | Removing excavated material/soils to a distance not exceeding 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point, complete all as specified and as directed by Engineer-in-Charge. |
| 4 | Material and Labour sand cushioning, with dry and clean fine river sand for underground cable 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cable complete all as specified and as directed by Engineer-in-Charge. (Note:- Punned thickness shall be considered for payment purpose) |
| 5 | Supply and laying Best quality, locally available, sub class 'B' burnt clay bricks (Old Size) for cable protection cover, laid flat and dry in trenches over the cable, perpendicular to the direction of cable complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Material and Labour Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engineer-in-Charge. |
| 7 | Material and Labour Plain cement concrete 1:3:6 type C-2 (using 20mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engineer-in-Charge. |
| 8 | Material and Labour Plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in foundation filling, coping and mass concrete complete all as specified and directed by Engineer-in-Charge. |
| 9 | Supply and Fixing Steel tubular swaged pole with cast iron base plate finial tapper plug, bolts nuts and screws and specified type 410-SP-31 ( 9Mtr long) in truly vertical position 1.5 m length of pole above ground level shall be painted with two coats of synthetic enamel paint in strips of 30 cm width, black and yellow alternatively and painting with two coats of aluminum paint over a coat of red oxide primer on rest part of pole and its connected parts complete all including nuts bolts and washers etc all as specified and directed by Engineer-in-Charge. Including laying GI pipe light grade for cable protection and fixing to new pole with flat iron clamp 25x3mm. |
| 10 | Supply and Fixing MS arms bracket for mounting one in Nos Security/Flood light fitting 40 mm medium grade GI at an angle of 120 degree, 1.5mtrs long including clamp/nutbolts & washers to brace the same properly with duly painted in synthetic enamel paint of two coat in silver colour complete all as specified and directed by Engineer-in-Charge. |
| 11 | Supply & Fixingt LED Security street light fitting 90 Watt 230 V AC outdoor type, energy saving and environment friendly light fitting with electronic gear housed with high pressure die cast aluminium housing LED street light luminaires complete with IP66 protection including all accessories complete all as specified and directed by Engineer-in-Charge.Notes:-(a) Contractor has to furnish a replacement warranty of 02 years for LED Light fittings from the certify date of completion of CA. The product will be replaced free of cost in the following case :-(i) Manufacturing defects.(ii) Failure due to mechanical and electrical impact.(iii) Drop in lumen (or lux at 1 m) below 90% of claimed values of lumen (or lux at 1 m) of the LED/Luminaires.(b) All LED light must meet the provision laid down in IS - 16101, 16102 Part -I/II, 16103 Part -I, 16104, 16105, 16106, 16108/2012 and 15885 Part -I/II Section 13.(c) Scope of work shall include LED Light fittings walls/ceiling which includes needful T & P and required accessories etc if any, complete including making connection, testing etc complete. No extra payment is admissible on these account. |
| 12 | Supply and Fixing out door type SMC junction box of size 250x200x105mm one piece moulded SMC door hinged fixed base with hinged right or left side and fixed to the foundation pole with suitable fixing arrangement, bus bar with single electrolytic aluminium and for both phase and neutral supported on FRP insulator and cut out complete fixed on the pole with suitable inlet and out let, provision for cable connection, MCB SP 6 Amps rating 'B' curve for controling the pole light, including necessary connection complete all as specified and directed by Engineer-in-Charge. |
| 13 | Supply and laying or fixing or laid in trenches/ducts/through pipes/in floors / under roads/ hard standing /along poles and testing LT cable XLPE, PVC insulated screened, bedded, galvanised steel strip or wire armourd cable (heavy duty) 1100 volt grade with aluminium conductor having cross sectional area 25 Sqmm 4 core conforming to IS-7098 (Part-I -1988) complete all as specified and as directed by Engineer-in-Charge. (Excavation and earth work, sand cushioning & GI pipe shall be measured and paid for separately). |
| 14 | Supply and laying or fixing or laid in trenches/ducts/through pipes/in floors / under roads/ hard standing /along poles and testing LT cable XLPE, PVC insulated screened, bedded, galvanised steel strip or wire armourd cable (heavy duty) 1100 volt grade with aluminium conductor having cross sectional area 16 Sqmm 4 core conforming to IS-7098 (Part-I -1988) complete all as specified and as directed by Engineer-in-Charge. (Excavation and earth work, sand cushioning & GI pipe shall be measured and paid for separately). |
| 15 | Supply and laying or fixing or laid in trenches/ducts/through pipes/in floors / under roads/ hard standing /along poles and testing LT cable XLPE, PVC insulated screened, bedded, galvanised steel strip or wire armourd cable (heavy duty) 1100 volt grade with aluminium conductor having cross sectional area 10 Sqmm 2 core conforming to IS-7098 (Part-I -1988) complete all as specified and as directed by Engineer-in-Charge. (Excavation and earth work, sand cushioning & GI pipe shall be measured and paid for separately). |
| 16 | Supply & fixing cable PVC insulated flexible copper conductor cable of size 1.5 Sqmm 3 core cut to pieces all as required, drawn into conduit/pipe fixed to wall or pole complete all as specified and directed by Engineer-in-Charge. |
| 17 | Supply & fixing Rigid non-metallic grade PVC conduit of size 20 mm dia, exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc, complete all as specified and directed. |
| 18 | Supply and Fixing double nail cable clamp clip 5mm thick heavy duty CPVC & UPVC with metal Nails wire fastening for fixing of cable on wall suitable for 25 Sqmm 4 core XLPE cablecomplete all as specified and directed by Engineer-in-Charge. |
| 19 | Supply and Fixing double nail cable clamp clip 5mm thick heavy duty CPVC & UPVC with metal Nails wire fastening for fixing of cable on wall suitable for 16 Sqmm 4 core XLPE cable complete all as specified and directed by Engineer-in-Charge. |
| 20 | Supply and Fixing double nail cable clamp clip 5mm thick heavy duty CPVC & UPVC with metal Nails wire fastening for fixing of cable on wall suitable for 10Sqmm 2 core XLPE cable complete all as specified and directed by Engineer-in-Charge. |
| 21 | Material and Labour Sub main wiring with two single core of size 2.5 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade ISI Marked including cutting, chasing and grouting, with and including non metallic rigid PVC casing capping medium quality of size 25 mm dia conforming to 3537 Part-I ISI marked including all fitting such as Tee, Elbow, bend etc drawn in and including one single core of size 2.5 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade ISI Marked as in contineous earth conductor cable connected to earth dolly complete all as specified and as directed by Engineer-in-charge. (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and as directed by Engineer-in-charge.Notes:-(a) Cost of PVC conduit , conduit accessories and earth wire included in sub main wiring.(b) Three single core 2.5 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade ISI Marked with and including non metallic rigid PVC conduit of size 25 mm ISI Marked dia shall be measured as one length. |
| 22 | Supply & Fixing Switch socket combination 2 in 1, 3 pin, 5/15 Amp flush type universal 240 volt with box complete all as specifeid and directed by Engineer-in-Charge. |
| 23 | Supply and fixing Refrigerator, electric driven (single phase), 230V of capacity 300 ltr, 3 star rated complete all as specified and directed by Engineer-in-Charge. |
| 24 | Supply and fixing of voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 Volts to 250 Volts with output voltage stabilized at 230 Volts with accuracy of ± 2.5% and of capacity 2 KVA complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
TodayDec 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysDec 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender