Defence Statutory Bodies & Commissions/Committees Closing in 17 days TDR #58579504

Tender For Provision Of Sanitary Annexe At Bldg No. P-02 (Mi Room) At installation Garuda, Naval Base Kochi And Addition/Aletration And Special Repairs To Compound Wall Near P-26 At Kataribagh, Kochi (Board No. 11/26-27) Under Ge(Nw) Kochi

Issued by Statutory Bodies & Commissions/Committees · Ernakulam, Kerala
Tender Value
42.70 Lakhs
Estimated cost
Bid Submission
08 Dec 2026
17 days left
EMD
85400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Provision Of Sanitary Annexe At Bldg No. P-02 (Mi Room) At installation Garuda, Naval Base Kochi And Addition/Aletration And Special Repairs To Compound Wall Near P-26 At Kataribagh, Kochi (Board No. 11/26-27) Under Ge(Nw) Kochi

BOQ

Name of Work:- PROVISION OF SANITARY ANNEXE AT BLDG NO. P-02 (MI ROOM) AT INS GARUDA, NAVAL BASE KOCHI AND ADDITION/ALETRATION AND SPECIAL REPAIRS TO COMPOUND WALL NEAR P-26 AT KATARIBAGH, KOCHI (BOARD NO. 11/26-27) UNDER GE(NW) KOCHI
Sl. No. Item Description
1Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation in soft/loose soil complete all as specified and as directed.
2Returning/filling in layers and ramming in layers around pile cap, plinth beam etc using excavated soil including spreading, levelling, well ramming in layers not less than 25cm thick complete all as specified and as directed.
3Removing excavated material not exceeding 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.
4M&L for plain cement concrete 1:4:8 Type D2 (using 40mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.
5M&L for PCC 1:2:4 Type B0 (using 12.50mm graded crushed stone aggregate) as in damp proof coarse complete all as specified and as directed.
6M&L for 75 mm thick plain cement concrete 1:3:6, Type C-1, (using 20mm graded stone aggregate) as in plinth protection and finished the surface even and fair without using extra cement, complete all as specified and as directed.
7M&L for RCC M-30 Design mix (using 20mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns etc; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
8M&L for RCC M-30 Design mix (using 20mm graded crushed stone aggregate) for columns, piers, pillars and struts complete all as specified and as directed.
9M&L for RCC M-30 Design mix (using 20mm graded crushed stone aggregate) for beams, cantlivers, lintels etc complete all as specified and as directed.
10M&L for RCC M-30 Design mix (using 20mm graded crushed stone aggregate) for chajja complete all as specified and as directed.
11M&L for use and waste of form work to to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat fair finshed surfaces complete all as specified and as directed.
12M&L for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. flat fair finished surfaces complete all as specified and as directed.
13M&L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchionsrectangular fair finished surfaces complete all as specified and as directed.
14M&L for use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick for flat fair finished surfaces of concrete (Horizontal or sloping) complete all as specified and as directed.
15M&L for TMT bars in reinforcement 10mm dia and over including cut to length, bend to required shape, cranking/hooking ends if necessary and binding with 0.9mm dia MS wire annealed or welding so as to secure the bar firmly in position/required shape complete all as specified and as directed.
16M&L for TMT bars 5mm dia and over and including 10mm dia in stirrups, spacers and binders etc , cut to length, bent to shape required, including cranking bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
17M&L for TMT bars in reinforcement 6 to 8mm dia and over including cut to length , bend to required shape , cranking/hooking ends if necessary and binding with 0.9mm dia MS wire annealed or welding so as to secure the bar firmly in position/required shape complete all as specified and as directed.
18M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc complete all as specified and as directed.
19M&L for hard core of gauge n exc 63mm deposited spread and levelled in layers n exc 15cm thickness watered and rammed to a true surface complete all as specified and as directed.
20M&L for providing 100mm thick plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in floors to receive top layer complete all as specified and as directed.
21M&L for ATT for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.
22M&L for ATT for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (area of the sub structure in contact with backfill to be measured) complete all as specified and as directed.
23M&L for pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6, Type C1, 1:3:6 (using 20mm graded stone aggregate) complete all as specified and as directed.
24M&L for providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in cement mortar, complete, in walls Type C1, 1:3:6 set in CM 1:4 (using 20mm graded stone aggregate), complete all as specified and as directed.
25M&L for 10mmm thick cement plaster in CM 1:6 on fair surfaces of brick work or concrete surfaces of wall, finished even and smooth without using extra cement complete all as specified and as directed.
26M&L for rendering 8mm thick cement plaster in CM 1:4 with WPC @3% by weight finished even and smooth without using extra cement over 12mm thick back coat on brick or concrete wall surfaces with cement mortar (1:6) complete all as specified and as directed. Note : WPC shall be measured and paid seperately.
27M&L for 5 mm thick rendering in cement mortar 1:3 on fair faces of of ceiling surfaces finished even and smooth complete all as specified and as directed.
28Supply only Integral waterproofing compound complete all as specified and as directed by Engineer-in-Charge.
29M&L for preparation of new wall surfaces and applying three coats of white wash complete all as specified and as directed.
30M&L for preparation of new decorated surfaces of ceiling and applying three coat of white wash complete all as specified and as directed.
31M&L for non skid coloured ceramic tiles 7 to 8 mm thick square/rectangular area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including provision of CM screed 10 mm thick in CM (1:4) complete all as specified and directed.
32M&L for glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including provision of backing coat 10 mm thick in CM (1:4) complete all as specified and as directed.
33S&F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including MS brackets 10 Ltrs capacity including flush pipe PVC connections etc complete all as specified and as directed.
34S&F vitreous china wash down water closet (pedestal pattern) white (including fixing bolts) including trap set in and including concrete and connection to drain and flush pipe complete all as specified and as directed.
35S&F mirror of selected quality glass 600mmx450mm beveled edge, mounted on 6mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed.
36S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.
37S&F PVC (SWR) pipes, single socketed, in any length, with rubber rings 110mm dia laid in trenches or in floor complete all as specified and directed.
38S&F PVC (SWR) pipes 75mm dia single socketed, in any lengthwith rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
39S&F in repair vitreous China wash hand basin of size 580 x 450 mm white, flat back with and including waste fittings brass chromium plated 32 mm with long and fly nut screwed shank excluding taps, waste chain and plug and porcelain stopper but including cast iron brackets complete all as specified and as directed.
40S&F pillar taps fancy type cast copper alloys, with capstan heads fancy type chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe suitable for 15 mm bore pipe complete all as specified and as directed.
41M&L for precast cement concrete cover slab type B-1, 1:2:4 (using 20mm graded stone aggregate) and set in cement mortar 1:6 complete all as specified and as directed.
42S&F powder coated anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.
43S&F powder coated anodised aluminium window and ventilator shutter powder coated side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and as directed.
44S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and as directed by Engineer-in-Charge.
45S&F 4mm thick frosted glass one side frosted ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each plane complete all as specifed and as directed.
46S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specifed and as directed.
47S&F factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing and as directed by Engineer-in-Charge.
48S&F stainless steel butt hinges medium weight size 100mm size complete all as specified and as directed.
49S&F aluminium anodised barrel tower bolt extruded section of 150 mm long complete all as specified and as directed.
50S&F extruded aluminium alloy handles fabricated type anodised 150 mm size complete all as specified and as directed.
51S&F 250mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.
52S&F aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.
53S&F toilet paper holder, vitreous china, box type fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.
54S&F towel ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 90gms) complete all as specified and as directed.
55S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming tofe -410W (gd E-250) quality A complete all as specified and as directed.
56S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet MP Tile pattern, 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
57S&F pre-painted plain sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding, fixed with screws complete all as specified and as directed.
58M&L for preparation of new steel and iron surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.
59S&F EURO GUARD PRO SQUARE UPVC RAINWATER GUTTER (160 MM), with all necessary fittings, clamp, joints, end cap, corner drop, centre drop, etc joining compounds, nut, bolts or screws etc and fixing in position, at any height complete all as specified and as directed.
60S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls (jointing shall be done with solvent cement) complete all as specified and as directed.
61S&F PVC (SWR) bends, any radius, 110mm bore complete all as specified and as directed.
62S&F anodised aluminum snap grid false ceiling comprising of 4mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/ GI/ Aluminium framework with stainless steel screws; having grid of size 605mmx605mm, including hangers 6 mm dia. GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40 x 3 mm size 60 mm long & expansion hold fastners 12.5 mm dia 40 mm long, complete all as specified and directed.
63M&L for surface excavation not exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft /loose soil complete all as specified and as directed.
64M&L for coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm spreading and levelling and ramming complete all as specified and as directed.
65M&L for machine pressed precast concrete interlocking paver block M-35 Grade with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60mm thickness, with grey cement and pigment complete all as specified and as directed.
66M&L for PCC Type B-0, 1:2:4 (using 12.50mm graded stone aggregate) as in mass concrete around the machine pressed precast concrete interlocking paver block or chamfered on edges complete all as specified and as directed.
67M&L for rendering 15mm thick on brick or concrete wall surfaces with cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and as directed.
68Material & Labour for preparation of newly plastered surfaces of wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.
69Demolition of brick work or stone bouldrs masonry built in cement mortar inlcuding all quoins precast concrete articles complete complete all as specified and as directed.
70M&L for plain cement concrete Type B0 (1:2:4) (using 12.5mm graded stone aggrgate) as in copings, bed plates, and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.
71S&F frame work as in doors or gates of angle or other section with gusset plates, rails braces etc. complete drilled for fixing of steel sheeting or other covering, doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening and fixing complete all as specified and as directed.
72M&L for site clearance as in soft/loose soil including removal of shrubs, vegetation, grass, bush, weed, tress, and saplings not exceeding 30 cm in girth complete all as specified and as directed.
73M&L for 75mm thick PCC (1:2:4) Type B-2 (using 40mm graded stone aggregate as in flooring complete all as specified and as directed.
74M&L for point wiring with proper colour coding as per IS 1.5 Sqmm PVC insulated unsheathed FRLSH multistranded single core copper conductor cable in PVC concealed conduit rigid non metalic (ISI marked) fixed concealed on wall/ roof except beam, column and RCC roof including chases cutting incl suitable size/ cap of sunken box for fixing modular switch and socket and modular white cover plate with frame, flush metal box etc incl 1.5 Sqmm PVC insulated copper conductor as earth continuity wire for one light point/fan point controlled by one switch complete all as specified and as directed.
75All as per item No 74 here-in-before for one 5 pin 5 amps socket outlet on independent board complete all as specified and as directed by Engineer-in-Charge.
76M&L for point wiring with proper colour coding as per IS 2.5 Sqmm PVC insulated unsheathed FRLSH multistranded single core copper conductor cable in PVC concealed conduit rigid non metalic (ISI marked) fixed concealed on wall/ roof except beam, column and RCC roof including chases cutting including suitable size/ cap of sunken box for fixing modular switch and socket and modular white cover plate, flush metal box etc incl 2.5 Sqmm PVC insulated copper conductor as earth continuity wire for one light point/fan point controlled by one switch complete all as specified and as directed.
77S&F modular switch 1 way 6 Amps,1 module type complete all as specified and as directed.
78S&F switch modular single pole one way 16 Amp 240 volts,1 Module complete all as specified and as directed.
79S&F socket modular 6 Amps and 2/3 pin combined 2 module complete all as specified and as directed.
80S&F modular socket 16 Amp 2/3 pin combined 2 module complete all as specified and as directed.
81S&F ceiling rose surface bakelite 65 x 50mm 3 terminals complete all as specified and as directed.
82S&F lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.
83S&F LED bulb 12 Watt , min 100 lumen/watt LED Lamp complete all as specified and as directed.
84S&F LED lights fitting 1x 20W, 230V, AC decorative box type with driver holder, 120 lum/watt including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
85S&F LED light fitting mirror type with high out put diffuser 2 feet 100 lum/watt, 10 watt, 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.
86S&F LED building security light fitting 35 Watt, 230 V, AC outdoor type, 140 lum/watt with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.
87S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including necessary civil work for fitment of exhaust fan as per existing site conditions complete all as specified and as directed.
88S&F sheet metal enclosures for DBs when MCBs to used single pole & neutral (SPN) double door 240 volts, 8 way with 200 Amp rated bus bar complete all as specified and as directed.
89S&F Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 AMP in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.
90S&F Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 6 To 32 AMP in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.
91S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all connected accessories such as safety valve, thermostate, heating element, NRV, connection piece, stop valves, etc. complete all as specified and as directed.
92S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 4 Sqmm 2 core complete all as specified and as directed.
93M&L for sub main wiring with 2 single core 4 Sqmm PVC insulated unsheathed multi stranded copper conductor cable 1100 volt grade drawn through and including PVC rigid conduit concealed wiring including necessary PVC conduit specials including chases cutting complete except beam and RCC roof and one run of 4 Sqmm PVC insulated unsheathed single core 1100 volts grade multi stranded copper conductor cable as earth continuity conductor and connecting with suitable size thimble complete all as specified and as directed by Engineer-in-Charge. Note: Two run of 4 sqmm size PVC cable, one run of 4 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length.
94M&L for earthing complete with GI earth plate electrode 600cmX600cmX6mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to GI earth wire of size 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No-3 of SSR Part-I connected to earthing testing point all as specified and directed including excavation and connected earth work in hard/dense soil, PCC 1:3:6 type C-1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15 mm dia bore GI light grade as earth lead protection pipe, 50 mm thick RCC 1:2:4 type B-1 cover slab of size 300x300x50mm as earth pit cover reinforced with 8 mm dia TMT bars @ 10 cm C/C both ways and with handle made out of 10 mm dia bars, funnel, strainer, charcoal and testing on completion all as specified and directed. Note- Rate quoted deemed to be included excavation and earth work in any type of soil with PCC type C1 in pit PCC Cover & other arrangement complete all as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58579504
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 42.70 Lakhs
LAST DATE 08-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provision Of Sanitary Annexe At Bldg No. P-02 (Mi Room) At installation Garuda, Naval Base Kochi And Addition/Aletration And Special Repairs To Compound Wall Near P-26 At Kataribagh, Kochi (Board No. 11/26-27) Under Ge(Nw) Kochi
Basic Detail
Tender No 8679_GE_NW
Bidding Type Tender
Location
City Ernakulam
State Kerala
Key Dates
Publish Date 17 Nov 2026
Submission Date 08 Dec 2026
Open Date 16 Dec 2026
Finance
Tender Value 42.70 Lakhs
Tender Fee 500
EMD 85400
Exemption Not Available
Document List
BOQ_896582.xls
eb1f8a50-c159-4709-8c9e-fa555a77dd73.html
PS8679.pdf
Tender8679.pdf
Tendernotice_1.pdf
Testing.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 08, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 17 days
Dec 16, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 25 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_896582.xls

html

eb1f8a50-c159-4709-8c9e-fa555a77dd73.html

pdf

PS8679.pdf

pdf

Tender8679.pdf

pdf

Tendernotice_1.pdf

pdf

Testing.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender