Tender For Repair And Maintenance Of Certain Road/Road Side Furniture And Allied Works Of Adrde Agra Under Ge (I) R&D Delhi
Tender Value
16.21 Lakhs
Estimated cost
Bid Submission
08 Dec 2026
19 days left
EMD
32420
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Certain Road/Road Side Furniture And Allied Works Of Adrde Agra Under Ge (I) R&D Delhi
BOQ
| Sl. No. | Item Description |
| 1 | S&F in repair for solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed. |
| 2 | M&L for preparation of existing bituminous surfaces, removing, dust, dirt grease and other foreign matters etc to receive the marking and M&L for thermo plastic (Reflective) line marking having 2.0 mm thickness (average) of uniform surface finish conforming to BS 3262 (Part 1) 1989 read in conjunction with the MORTH specification 803 clause 4.2.2 on bituminous surfaces in white/yellow colour and super imposed with glass beads confirming to BS 6088 read in conjuction with and MORTH specification 803 clause 4.3.3 complete all as specified and directed.Note - MOST specification 803 shall be followed strictly for execution of work and suitable machine shall be used for the marking as approved by the GE. Shape and size/ patterns of marking shall be as approved by GE. |
| 3 | S&F in repair road studs made of polycarbonate moulded plastic body of single shank of size 100x100x26mm of min weight of 140gms with electronically welded micro prismatic lense on both side of colour- Yellow/Red/Amber for maximum retro reflection in wet and dry conditions and to be fixed on road with shank as road sign complete all as per manufacturer instructions as specified and directed |
| 4 | S&F for road side convex mirror of size 800mm dia(material polycarbonate) mounted on MS pipe of 2.10m long and dia of pipe is 80mm embedded with PCC (1:2:4) type B-1, (20mm graded aggregate) including RFR, removal and two coat of synthetic enamel paint over a coat of zinc chrome primer in MS pipe including necessary excavation and earth work in any type of soil for fixing and embeding the delineator on ground with hold fast using PCC (1:2:4) type B1 (using 20mm graded stone aggregate) (minimum PCC block size 300mm x 300mm x 300mm) for proper grouting complete. |
| 5 | M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with CM (1:3 ) (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 6 | M&L for preparation of new concrete surface and applying two coats of synthetic enamel paint over a priming paint plaster coat complete all as specified and directed by Engineer-in-charge. |
| 7 | M&L for removing old enamel paint and cleaning with scrapers, any number of coats any width or girth and applying two coats of synthetic enamel paint over on brick/concrete/AC surface complete all as specified and directed by Engineer-in-charge. |
| 8 | S&F in repair delineators made out of 75mm diameter, heavy duty mild steel powder coated pipe of length 1200mm with ABS round body fitted with 2 Nos 100mm diameter highly reflective reflectors made out of PMMA mounted on it with anti rust and anti theft steel net having weight approx 1760grms, Including necessary excavation and earth work in any type of soil for fixing and embeding the delineator on ground with hold fast using PCC (1:2:4) type B1 (using 20mm graded stone aggregate) (minimum PCC block size 300mmx300mmx300mm) for proper grouting complete all as specified and directed. |
| 9 | Surface dressing not exceeding 15cm deep and averaging 7.5cm deep and getting out soft/loose soil.Note: To be executed in selected streches as per requirement and as directed by Engineer-in-Charge. |
| 10 | M&L for repair to pot holes exceeding 30mm depth and n.exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surface in roads, paths, etc cutting around edges to at least 25mm in depth and making good by applying tack coat @ 5 Kgs per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with paving bitumen VG-30 grade@ 9.8 Kgs per 10 Sqm blended with 0.09 cum of stone chipping of size 6.3mm and again well rolled with 8 to 12 tonne power roller (Iincluding supply of pre-mixed macadam, binder and chipping) complete all as specified and directed by Engineer-in-Charge. |
| 11 | M&L preparing existing black top surface or bituminous macadam surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc on back top / concrete surfaces then applying evenly a priming / tack coat with paving bituminous primer VG-10 penetration over the prepared surface by mechanical sprayer @ 5 Kgs/10 Sqm of surface area complete all as specified and directed by the Engineer-in-Charge. |
| 12 | M&L applying bituminous premix asphaltic dense concrete (DAC), 30mm thick (consolidated thickness) with 6% binder content of paving bitumen any penetration VG-30 grade by weight of total mix including cement filler, on surfaces rolled compacted with using 8 to 12 tonne capacity power roller to achieve the required compactness, camber and gradent mixed in hot mix plant using design mix and laid by mechanical paver finisher complete all as specified and directed by the Engineer-in-charge. |
| 13 | M&L premix bituminous macadam laid, rolled (with using 8-12 tonne power roller) and compacted to required gradient and camber in n.exc 75mm thickness (consolidated thickness) with binder content of 4% by weight of total mix, content of paving bitumen VG-30, mixed in hot mix plant and laid by mechnical paver finisher complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysDec 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender