Defence Statutory Bodies & Commissions/Committees Closing in 10 days TDR #58579494

Tender For Provn Of Road Near P-61 Towards Under Ge (West) Bareilly

Issued by Statutory Bodies & Commissions/Committees · Bareilly, Uttar Pradesh
Tender Value
9.61 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
10 days left
EMD
19230
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Provn Of Road Near P-61 Towards Under Ge (West) Bareilly

BOQ

Name of Work:- PROVN OF ROAD NEAR P-61 TOWARDS UNDER GE (WEST) BAREILLY
Sl. No. Item Description
1Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: COMMANDER WORKS ENGINEER BAREILLY Name of Work: PROVN OF ROAD NEAR P-61 TOWARDS UNDER GE (WEST) BAREILLY Contract No : CWE / BLY / GE(W) / 115 OF 2026-27 Bidder Name : SCHEDULE A(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words
2Excavating over areas, n exc 1.5 m deep and getting out soft and loose soil complete all as specified and directed.
3M&L for formation rolling and consolidating formation cutting with power roller 8 to 12 ton complete all as specified and directed.
4M&L for hardcore of broken stone of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and directed.
5M&L for 150 mm thick soling or sub base with broken boulder or quarried stone in terstices filled, surface formed and rolled & consolidated to required gradient & camber complete all as specified and directed.
6M&L for 150 mm thick (compacted thickness) water bound meccadam (WBM) with coarse aggregates of grading (Granite trap or Basalt) 2 (63 to 40mm size) or of grading (50 to 20mm size), spread, rolled and consolidated to gradient, camber, level and super elevation with 8 to 12 tonne power roller, complete all as specified and directed.
7M&L for preparing unsurfaced water bound macadam surfaces of road by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and M& L for applying evenly a priming/tack coat with bituminous primer @ 10 kg per 10 sqm using paving bitumen VG 10 grading complete all as specified and directed.
8M&L for bituminous premix asphaltic semi dense concrete 40 mm consolidated thickness with 5.5% binder content of paving bitumen (VG-30 grade) by weight of total mix, rolled and compacted, mixed in mechanical hot mixed plant and premixed material, laid with mechanical paver finished including rolling to required camber and gradient complete with 8 to 10 tone power roller to required compaction complete all as specified and directed. Note :(i) Design Mix for SDAC shall be carried out through an authorised testing lab and the cost of testing shall be included in quoted rate. (ii) Aggregates for Bituminous works shall confirm to clause No 20 B 2.5 of SSR 2009 Part- I (Specifications) with the following Constraints:- Aggregate passing 13.2 mm IS Sieve -100 % . Aggregate passing 5.60 mm IS Sieve -40% to 50% , Aggregate passing 2.8 mm IS Sieve -30%to 35% Note:- Design mix for Srl item No. 7 & 10 shall be based on job mix formula, in case the binder content (i.e. Bitumen) is less than the content specified under these items then a minus adjustment @ Rs 70/- per kg of bitumen (less consumed) shall be applied on the quoted rate of contractor against these items, hence the quoted rate of contractor shall be reduced based on less content of bitumen required as per job mix formula. However, no price adjustment on plus side shall be made for increase of quantity of bitumen in case of required as per job mix formula.
9Scarifying or picking gravelled macadam or bituminous macadam surface in area exc 400 sqm and exc 50mm & n. exc 100 mm deep complete all as specified and directed.
10M&L for preparing old black top surfaces of road by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and M&L for applying evenly a priming/ tack coat with bituminous primer at 5 kg per 10 sq metre (Paving bitumen grade VG-10) complete all as specified and directed.
11M&L for Premix bituminous, macadam with binder content of 4% by weight of total mix using paving bitumen VG-30 grade, laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed. Note :(i) Aggregates for Bituminous works shall confirm to clause No 20 B 2.5 of SSR 2009 Part- I (Specifications) with the following Constraints:- Aggregate passing 26.5 mm IS Sieve -100 % Aggregate passing13.20 mm IS Sieve -60% to 80% Aggregate passing 4.75 mm IS Sieve -20% to 30% Aggregate passing 2.36 mm IS Sieve -5% to 10%
12M&L for continuous brick edging laid on end vertically with width equal to the depth of the brick, laid dry, on edge complete all as specified and directed.
13M&L for painting lines, arrows, letters etc on roads, pavements and the like exc. 10 cm wide by applying 2 mm thick thermoplastic road marking paint of specified shade/colour either continious or broken lines to the required width and length over the existing painted furfaces/ new bituminous surfaces with solvent based thermoplastic road marking paint using semi automatic thermoplastic paint applicator machine driven by exparienced operator on road inlcuding all materials, labour, T&P and cleaning dirt, seals, oil, greases and foreign materials etc of road surface complete all as specified as directed.(Note thermoplastic road marking paint shall be applied as per manufactures instruction alongwith MORTH technology and speciality)
14S&F cat eye solar reflective type of metal body (selected colour approved by GE) alloy of size 125mm x 110mm x 80mm with PAMA striplens reflector of model No. DA 971 P fixed with and incl MS stud of suitable size as per manufactures instructions all as specified and directed,
15S&F 1000 mm dia convex mirror made of PC meterial provided with suitable MS pipe post duly powder coated as per site requirement it should have clear and deficate mirror image valving 130 degree of viewing angle and unbreakable and stronger than glaas and fixing cement concrete 1:2:4 with size of block 300 mm x 300 mm x 450 mm deep including earthwork complete all as specifed and directed.
16M&L for brick work with subclass `B' old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed .
17M&L for rendering 15 mm thick on brick work or stone masonry surfaces other than fair face of brickwork in CM 1:4, finished fair & even & smooth without using extra cement complete all as specified and directed
18M&L for rendering 10 mm thick on fair face of brick masonry in cement mortar 1:4 on fair faces of brick work or cement concrete surfaces complete all as specified and directed.
19M&L for two coat of cement base paint on new plastered surface including preparation of surface complete all as specified and as directed
20M&L for reinforced cement concrete nominal mixed (1:2:4) using 12.5mm grade stone aggregate as in slabs supported on walls, beams and column in floors, roofs, landings,balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed .
21M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed .
22M&L for mild steel bars TMT bar 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed .
23M&L for machine pressed precast conctete interlocking colored paver block with glazed finish any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade over and including 25mm thick sand cushioning including watering and consolidation and plain cemnt concrete 1:4:8 of 75 mm thick type D2 (40 mm graded stone aggregates) complete all specified and directed.
24M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded aggregate edging etc complete all as specified and directed.
25S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors as spout pipe in wall complete all as specified and as directed
26Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58579494
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 9.61 Lakhs
LAST DATE 01-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provn Of Road Near P-61 Towards Under Ge (West) Bareilly
Basic Detail
Tender No 8100/B/987/E8
Bidding Type Tender
Location
City Bareilly
State Uttar Pradesh
Key Dates
Publish Date 17 Nov 2026
Submission Date 01 Dec 2026
Open Date 08 Dec 2026
Finance
Tender Value 9.61 Lakhs
Tender Fee 500
EMD 19230
Exemption Available
Document List
115_3tndr.pdf
b10b59ad-0155-4ed1-9907-fece5237187c.html
BOQ_896538.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 01, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Dec 08, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 17 days

Tender Documents

Download All (ZIP) ↓
pdf

115_3tndr.pdf

html

b10b59ad-0155-4ed1-9907-fece5237187c.html

xls

BOQ_896538.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender