Defence Statutory Bodies & Commissions/Committees Closing in 16 days TDR #58579484

Tender For Repair/Maint Of External Water Supply Pipe Line Of Various Size At 24 Ed Manauri

Issued by Statutory Bodies & Commissions/Committees · Prayagraj, Uttar Pradesh
Tender Value
14.90 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
16 days left
EMD
29800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair/Maint Of External Water Supply Pipe Line Of Various Size At 24 Ed Manauri

BOQ

Name of Work:- REPAIR/MAINT OF EXTERNAL WATER SUPPLY PIPE LINE OF VARIOUS SIZE AT 24 ED MANAURI
Sl. No. Item Description
1Excavation in trenches for laying of GI water tubing etc., getting out in soft/loose soil n.exc 1.5m wide and n.exc 1.5m depth complete all as specified and directed.
2Returning, filling in trenches including spreading, leveling, watering and in layers n.exc 25cms thick without damaging pipes/special fittings as in any type of soil complete all as specified and directed.
3Removing excavated materials to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.
4Providing, laying, testing & Commissioning of MS pipe 100 mm , heavy duty conforming to IS 1239 part 2 1992 including all types of joints and heavy duty drop forged/fabricated fittings like elbows, tees flanges, tapers, nuts bolts, gaskets etc. laid in trenches. Pipes laid trenches shall be provided with.anti corroosive wrapping coating as per IS10221 and the rate shall be deemed to include the same. Note:- Excavation and earth work only shall be measured and paid separately.
5all as per item No 4.00 above but size 80 mm
6all as per item No 4.00 above but size 150 mm
7Material and labour Ductile iron/ CI fitting suitable for K9/ K7 such as spigot and socket pipe/ flanged Specials of any dia including taking down of unservicable / damaged specials as required at site all as specified and directed.
8M&L for centrifugally cast (spun) ductile iron pressure pipes 150 mm bore for water with socket & spigot ends confirming to IS 8329/2000 in any length for classification of K7 suitable for rubber gasket push on with cement mortar lining inside the pipe with outside zinc coating as per IS 8329/2000 including taking down old unsv pipes complete all as specified and as directed.
9M&L for centrifugally cast (spun) ductile iron pressure pipes 100 mm bore for water with socket & spigot ends confirming to IS 8329/2000 in any length for classification of K suitable for rubber gasket push on with cement mortar lining inside the pipe with outside zinc coating as per IS 8329/2000 including taking down old unsv pipes complete all as specified and as directed.
10Material and labour for PCC 1:3:6, type C2 using 20mm graded stone aggregate for making good disturbed surfaces road /pavments/ foot paths etc., complete all as specified and directed .
11Material and labour for construction of block masonary valve pit complete with PCC 1:3:6 type C1 solid block walling 20cm thick set in CM (1:4) over 100 mm thick PCC 1:4:8 type D2 foundation, 50 mm thick PCC 1:2:4 type B1 coping on the top of wall, rendering 15 mm thick with CM 1:4 on inside and exposed external surfaces up to 150mm below GL, 3 mm thick MS sheet cover, angle iron frame with locking arrangment etc., including dismantling old existing damaged valve pit complete of following sizes all as specified and directed:-
12All as per Item No 11.00 above but 0.75m x 0.75m x 0.75m complete all as specified & directed.
13All as per Item No 11.00 above but 1.2m x 1.2m x 1.2m complete all as specified & directed.
14All as per Item No 11.00 above but 1.5m x 1.5m x 1.5m complete all as specified & directed.
15All as per Item No 11.00 above but 2.0m x 2.0m x 2.0m complete all as specified & directed.
16Supply and fix for gun metal gate valve (ISI) marked with iron wheel head screwed both ends for iron pipe suitable for following bore of pipe including taking down old existing gate valve complete all as speficied and directed.
17All as per Item No 16.00 above but 50 mm bore pipe complete all as specified & directed.
18All as per Item No 16.00 above but 40 mm bore pipe complete all as specified & directed.
19All as per Item No 16.00 above but 25 mm bore pipe complete all as specified & directed.
20Supply and fixing in repairs of the Three phase submersible pump controllers/ Starter with ML contactor & MN5 relay type MU G-40 FASD fully automatic suitable for 35HP submersible motor, 415V, 50Hz, 3Ph relay range 36-60 Amp, indication offered - ON/ OFF, with voltage and Amp meter complete all specified and as directed. Make: L&T cat part No-CS90908LOTO
21Taking down old unserviceable butterfly valves and supply and fixing new butterfly valve MS body double flanged and drilled conforming to IS-780 of 1980 PN-1.6 including rubber gasket 3 mm thick, stainless steel closer, iron Handle and suitable size of nuts bolts and washers/rubber packing complete all as specified for the following sizes.
22All as per Item No 21.00 above but Sluice valves 150 mm dia complete all as specified & directed.
23All as per Item No 21.00 above but Sluice valves 100 mm dia complete all as specified & directed.
24All as per Item No 21.00 above but Sluice valves 80 mm dia complete all as specified & directed.
25Taking down old unserviceable sluice valves and supply and fix new Sluice valve CI body double flanged and drilled conforming to IS-780 of 1980 PN-1.6 including rubber gasket 3 mm thick, stainless steel spindle, iron wheel head and suitable size of nuts bolts and washers complete all as specified for the following sizes.
26All as per Item No 25.00 above but Sluice valves 150 mm dia complete all as specified & directed.
27All as per Item No 25.00 above but Sluice valves 100 mm dia complete all as specified & directed.
28All as per Item No 25.00 above but Sluice valves 80 mm dia complete all as specified & directed.
29Excavating bituminous road appx 1.2 m wide and n.exc 1.5m depth to complete the work at the earliest on highways and main roads for laying/ repair pipes, retuning fillingin and finishing the top surface after laying/repair of pipe work with PCC (1:2:4) type B2 to a minimum depth of 300mm over dry mix concrete (1:4:8) type D2 to a minimum depth of 600mm over rammed earth to suit the site requirement and making good the disturbed surface to match with existing finish complete all as specified and directed.
30M & L for every six month Bacteriological/ Chemical water testing analysis reports main pump houses including RO plant. Sample shall be collected by contractor from all sources and testing will be done at Jal Kal Vibhag Nagar Nigam at Govt laboratory and report to be submitted to this office in duplicate copy complete all as specifieds and directed by engineer-in-Charge. Please Enable Macros to View BoQ information
31M & L for every six month Bacteriological/ Chemical water testing analysis reports main pump houses including RO plant. Sample shall be collected by contractor from all sources and testing will be done at Jal Kal Vibhag Nagar Nigam at Govt laboratory and report to be submitted to this office in duplicate copy complete all as specifieds and directed by engineer-in-Charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58579484
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 14.90 Lakhs
LAST DATE 07-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair/Maint Of External Water Supply Pipe Line Of Various Size At 24 Ed Manauri
Basic Detail
Tender No 8000/82/E8
Bidding Type Tender
Location
City Prayagraj
State Uttar Pradesh
Key Dates
Publish Date 17 Nov 2026
Submission Date 07 Dec 2026
Open Date 09 Dec 2026
Finance
Tender Value 14.90 Lakhs
Tender Fee 500
EMD 29800
Exemption Available
Document List
BOQ_896581.xls
ffe7d4a1-e3cf-4cc6-b28b-a42881a5561a.html
TENDER82.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 16 days
Dec 09, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 18 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_896581.xls

html

ffe7d4a1-e3cf-4cc6-b28b-a42881a5561a.html

pdf

TENDER82.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender