Defence Statutory Bodies & Commissions/Committees Closing in 20 days TDR #58579481

Tender For Repairs To Drainage System Around Runway, Cleaning Of Drains, Painting And Joint Filling To Runway, Taxi Track And Dispersal Area At installation Parundu Ramnad Under Ge Tirunelveli

Issued by Statutory Bodies & Commissions/Committees · Ramanathapuram, Tamil Nadu
Tender Value
29.98 Lakhs
Estimated cost
Bid Submission
09 Dec 2026
20 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ramanathapuram → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repairs To Drainage System Around Runway, Cleaning Of Drains, Painting And Joint Filling To Runway, Taxi Track And Dispersal Area At installation Parundu Ramnad Under Ge Tirunelveli

BOQ

Name of Work:- REPAIRS TO DRAINAGE SYSTEM AROUND RUNWAY, CLEANING OF DRAINS, PAINTING AND JOINT FILLING TO RUNWAY, TAXI TRACK AND DISPERSAL AREA AT INS PARUNDU RAMNAD UNDER GE TIRUNELVELI
Sl. No. Item Description
1Material and labour for raking out of old existing sealant compound and back up rod of the existing joints by special tools like cutting blades/machines, cleaning the joints thoroughly by application of compressed air, Joints made dry, vacuum cleaned and free of dirt, oil, vegetation and other debris and application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before pouring the sealant and thereafter filled with closed cell medium density, cross linked polyethylene foam, backup rod of 12 mm dia for complete length of the joint and filling with polyurethane joint sealant, meeting the requirements mentioned in BS-5212, BS 4254 and EN-141875-2003 with minimum movement accommodation factor (MAF) of +/- 30% complete all as specified and as directed.
2Material and labour for raking out old existing sealant compound, back up rod and filler board of existing joints by special tools like raker/cutting blades/machines, cleaning the joints thoroughly by application of compressed air, joint made dry, vacuum cleaned and free of dirt, oil, vegetation and other debris, and applying two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before placing the filler board and pouring the sealant, filling with pre-molded 25mm thick compressible polyethylene closed cell type filler board as specified and filling with closed cell medium density, cross linked polyethylene foam, backup rod of 30mm dia for complete length of the joint, and finally filling with polyurethane joint sealant meeting the requirements mentioned in BS-5212, BS 4254 and EN-141875-2003 with minimum movement accommodation factor MAF of +/- 30% complete all as specified and as directed.
3Material and labour for preparing and cleaning edges of concrete pavement joints of any type and shape, free from loose particles, grease, oil, demolding agents, cutting and chiselling the existing damaged portion of edges of joints to provide a regular prismatic cavity, repairs to pot holes, cracks as directed and cleaning by using blower and wash with acid solutions if required and applying primer coat of epoxy (100 parts of epoxy resin with 50 part of epoxy hardener by weight proportion) and filling the cut portion with epoxy mortar, of make: Hundsman (with 100 parts of epoxy resin, araldite with 50 parts of epoxy hardener, Aradur mixed with 800 parts of quartz sand by weight) including provision of temporary wooden strips or metal strips as formwork to the edges of expansion/contraction/dummy joints and trowelling the mixture to level with the adjoining surface all as per manufacturer instruction complete all as specified and directed. Note: Tenderers to note that runway will be available for executing work on Saturdays and Sundays or on holidays or as required by the user. The tenderer has to work as per users requirement and unit rate quoted by the tenderer shall be deemed to include for this provision/condition.
4Material and labour for Painting Runway/Taxi track/ Apron marking with Mechanized runway/road marking Air spray Painting equipment with one coat to give uniform finish with IS164 road marking water base paint of superior make like Asian/Berger/Nerolac/ITS Coatings or equivalent (Paint spreading rate per liter should be 6.02 Sqm for one coat) as approved by the Engineer-in-charge including cleaning the surface of all dirt, scales, oil, grease and other foreign material and lining out complete. One coat on old work with white, black colours etc complete all as specified and as directed. Note: Painting to be carried out twice during the contract period as per user requirement.
5Material and labour for Painting of Taxi way/Apron, marking with Retro Reflective road marking paint of superior make of Apco track / Fast track WBR 3427 of Asian/Berger/Nerolac/ITS Coatings or equivalent paint with Air spray painting equipment including application of high index glass beads (TTB 1325 type III and having refractive index 1.9). Painting shall be done for the existing Taxiway / Apron markings as per the recommended dimensions and as per direction of Engineer-in-charge. The existing surface shall be cleaned thoroughly of dirt, dust, scales, oil, grease etc. before application of the paint. Painting to be applied should have a single coat coverage of 0.50 litre per sqm for paint and 500 grams per sqm for glass beads with One coat on old/new work for White, Yellow, Red colours.Note:- (i) Retro reflective paint shall be applied as per manufacturers instructions along with MORTH Technology and specialty complete. (ii) Painting to be carried out twice during the contract period as per user requirement.
6Material and labour for Cleaning of covered drains incl removal of silt, grass etc and removing/disposing outside runway area using tractor or any other mehanical means as instructed by Engr-in- Charge. Note: The actual depth of silt deposited in the drain only be considered for measurement. The drain cleaning is to be carried out twice during the contract period as per user requirement.
7Providing JCB for levelling of existing ground and uprooting of tree roots in airfield area complete all as specified and as directed. Note:-(i) Register containing details of date and time of operation of JCB shall be maintained. Unit rate quoted shall be deemed to be inclusive for providing JCB, operation of helper, fuel etc and nothing extra shall be payable on this account. (ii) Any Damage to the underground electric/communication cables/water supply pipe line etc shall be made good by the contractor at his own cost and nothing extra shall be payable on this account
8Surface dressing using mechanical grader not exceeding 15cm deep in hard/dense soil and levelling the uneven surface of natural ground by trimming to an even surface by removing vegetation and scrapping high patches and filling in low patches with soil to have a neat look complete all as specified and directed.
9Demolition of reinforced cement concrete in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
10Material and Labour for precast RCC 1:2:4 type B1 using 20mm graded stone aggregate in cover slab for culvert/drain and set in CM 1:4 including necessary form work complete all specified and as directed. Note: Reinforcement (Steel) will be measured & paid separately.
11M&L for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia complete all as specified and directed.
12S&F in repairs DTGM board made of 2 mm thick PVC sheet, one side black colour and other side plain white and numbered in red colour with reflective stickers and fixed in position using second class hardwood scantling & necessary supports complete all as specified and as directed.
13S&F in repairs sign board made of 2 mm thick acrylic sheet, coloured with reflective stickers and fixed in position with screws on existing supports complete all as specified and as directed.
14M&L for preparation of old plasterd wall/steel surfaces exc 10 cm girth or width and applying one coat of synthetic enamel paint complete all as specified and directed.Note: The painting is to be carried out twice during contract period or as per user requirements.
15Demolition of brick or stone masonry built in cement mortar including all quoins, arches,pillers etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified & directed
16M&L for Brick work with sub class 'B' brick straight or curved on plan exc 6m mean radius and built in CM 1:4 complete all as specified and as directed.
17M&L for Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete wall surfaces finished fair and even all as specified and and directed.
18Material and labour for Forming fair finish drain or channel 30cm inner girth in cement concrete using extra cement complete all as specified and as directed.
19M&L for preparing old black top surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms & finally fanning the cleaned surface using air compressor/blower to remove all loose dirt etc complete & applying PME as chip sealing over loose aggregates in the existing approach road surface to runway in ratio 1:1 (PME: Water) to make smooth movement for traffic all as specified and as directed Schedule of Credit amount brought back from Ser Page No.34 - Rs. 8625.00 will be deducted from the above quoted amount to derive the contract sum. SIGNATURE OF CONTRACTOR Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58579481
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 29.98 Lakhs
LAST DATE 09-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repairs To Drainage System Around Runway, Cleaning Of Drains, Painting And Joint Filling To Runway, Taxi Track And Dispersal Area At installation Parundu Ramnad Under Ge Tirunelveli
Basic Detail
Tender No CWE/NAVY/TVL/81516/E8 OF 2026-27
Bidding Type Tender
Location
City Ramanathapuram
State Tamil Nadu
Key Dates
Publish Date 17 Nov 2026
Submission Date 09 Dec 2026
Open Date 11 Dec 2026
Finance
Tender Value 29.98 Lakhs
Tender Fee 500
EMD 60000
Exemption Available
Document List
81516GENERALPAGES.pdf
81516PS.pdf
BOQ_896647.xls
dd7a4d94-a672-4227-8fd2-ccf0844b5866.html
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 09, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 20 days
Dec 11, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 22 days

Tender Documents

Download All (ZIP) ↓
pdf

81516GENERALPAGES.pdf

pdf

81516PS.pdf

xls

BOQ_896647.xls

html

dd7a4d94-a672-4227-8fd2-ccf0844b5866.html

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender