Defence Statutory Bodies & Commissions/Committees Closing in 19 days TDR #58579462

Tender For Repair & Maintenance Of False Ceiling, Wall Panelings, Roof Sheet, Rendering Brickwork, Periodical Services & Roof Treatment Including Water Tank Cleaning & Repair Of Rain Water Pipes Under Age B/R-Iv At Ge (Mcte) Mhow

Issued by Statutory Bodies & Commissions/Committees · Indore, Madhya Pradesh
Tender Value
25 Lakhs
Estimated cost
Bid Submission
08 Dec 2026
19 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Indore → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Repair & Maintenance Of False Ceiling, Wall Panelings, Roof Sheet, Rendering Brickwork, Periodical Services & Roof Treatment Including Water Tank Cleaning & Repair Of Rain Water Pipes Under Age B/R-Iv At Ge (Mcte) Mhow

BOQ

Name of Work:- Repair & Maintenance of False Ceiling, Wall Panelings, Roof Sheet, Rendering Brickwork, Periodical Services & Roof Treatment Including Water Tank Cleaning & Repair of Rain Water Pipes under AGE B/R-IV at GE (MCTE) Mhow
Sl. No. Item Description
1Taking down cement or cement plaster on brick or stone walls, concrete surface etc. including racking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.
2M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces (interior) in CM 1:6 finished even and fair complete all as specified and directed.
3M&L for Rendering 5mm thick on fair faces of concrete surfaces of ceiling, chajja & projections in CM 1:3 including finishing the surface even and smooth without using extra cement complete all as specified and directed.
4M&L for Rendering 15mm thick on fair faces of concrete/ brick exterior surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed.
5M&L for preparation of new surface of plastered of wall and applying two coats of distemper oil emulsion incl priming the surfaces and incl one coat of wall putty complete all as specified and directed.
6M&L for preparation of newly plastered surface and applying three coats of white wash on ceiling complete all as specified and directed.
7M&L for preparation of newly plastered surface on exterior wall and applying two coats of cement paint over one coat of priming the surfaces complete all as specified and directed.
8M&L for complete removal of existing treatment and preparation of old surfaces of plastered surface of walls and applying two coat of distemper oil emulsion, white or tinted on old wall surface complete all as specified and directed.
9M&L for preparation of old plaster surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
10M&L for complete removal of existing treatment of wall and preparation of old plastered surfaces of walls and applying two coat of cement base paint including preparation of surfaces of wall including scaffolding, trestles, ladders cradles and necessary safety measures complete all as specified and directed.
11M&L for complete removal of existing treatment of wall and preparation of old plastered surfaces of walls and applying one coat of cement base paint including preparation of surfaces of wall including scaffolding, trestles, ladders cradles and necessary safety measures complete all as specified and directed.
12M&L for preparation old plastered surface of wall/ ceilings and applying two coats of weather proof acrylic exterior paint including scaffolding, trestles, ladders cradles and necessary safety measures complete all as specified and directed.
13M&L for complete removal of existing treatment from wall by scrapping of (exterior) surfaces of old decorated walls etc. and applying wall care white putty 1mm thick for levelling the surfaces including filling of all crakes & applying two coats of exterior emulsion weather proof paint over one coat of exterior wall primer including scaffolding, trestles, ladders cradles and necessary safety measures complete all as specified and directed.
14M&L for applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified and directed.
15M&L for applying one coat of synthetic enamel paint on old steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified and directed.
16Dismantling/ removal existing roof treatment any thickness and specification consisting of screed, tar felts etc. removal the dismantled materials outside MoD land complete all as specified and directed.
17M&L for bitumen felt water proofing Roof treatment using APP based polymeric membrane of weighing not less than 3mm thick, weighing not less than 3.00 kg/ Sqm, reinforeced with polyster non-woven fabric (weighing not less than 150 kg/ Sqm) laid over and including cold bitumen primer applied at the rate of 0.30 kg/ Sqm by forced application complete all as specified and directed.
18M&L for providing cement concrete type B0, 1:2:4 using 12.50mm graded stone aggregate as in roof padding to achieve the required slope and smooth surface and in coping, benching etc. mixed with liquid water as per manufactures instructions complete all as specified and directed.Note : Liquid WPC shall be measured and paid separately under relevant item of this BOQ.
19M&L for Cement concrete tiles 20cm x 20cm x 20mm thick, with grey cement and no pigments, machine pressed; set jointed and pointed in neat cement slurry in floor laid over and including 15mm thick screed bed in CM 1:6 and filling the joints with Tile Mix premium cementitious grout material of JK Cement or its equivalent complete all as specified and directed
20Disconnecting existing tanks, setting aside (or lowering ir required) for repair, cleaning etc. and hoisting if required reconnecting & refixing in position capacity 500 ltrs/ 1000 litres (cleaning repairing etc. measured and paid separately) complete all as specified and directed.Note:- (i) Cleaning of tank shall be measured separately.(ii) If float valve is required to be replaced, the same shall be measured separately.
21Cleaning and removing all scale, dirt etc from tank and from mouths of circulating pipe etc. of capacity exc. 500 ltrs but not exc. 1000 litres with gunny bage and sands cleaning with fresh water and bleaching powder complete all as specified and directed.
22Cleaning and removing all scale, dirt etc from tank and from mouths of circulating pipe etc. capacity exc. 250 ltrs and n.exc. 500 litres with gunny bage and sands cleaning with fresh water and bleaching powder and making date of cleaning CA No. complete all as specified and directed.
23S&F in repair 20mm dia Ball valves, of PTMT high pressure, with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15 to 25mm to 142 - 455 gms) complete all as specified and directed.
24S&F in repair rotational moulded polyethylene water storage tanks of capacity 500 litres ISI marked three layer, (cylindrical vertical with closed top) with thread type cover and fixed with screw hoisted and fixed in position (Including dismantling old water tank and 20mm brass ball valve) in SSR Part-I, complete all as specified and directed.
25S&F in repair rotational moulded polyethylene water storage tanks of capacity 1000 litres ISI marked three layer, (cylindrical vertical with closed top) with thread type cover and fixed with screw hoisted and fixed in position (Including dismantling old water tank and 20mm brass ball valve) in SSR Part-I, complete all as specified and directed.
26S&F in repair 25mm bore SS Pipe curtain rods including SS Brackets & SS Decorative dome, suitable for door/windows curtain with fancy type powder coated SS dooms with SS Brackets fitted to each other and fixed to wall incl. remocal of existing rod and making good etc. complete all as specified and directed.
27Hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frame glazed with oil putty or fixed with beads) complete all as specified and directed.
28M&L for 3mm to 4mm thick sheet glass, ordinary quality and glazing with oil putty and fitted in wooden/ steel window in square n exc 0.5 Sqm in each pane complete all as specified and directed.
29M&L for 3mm thick sheet figured glass, pin headed type and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed.
30S&F galvanised mild steel wire cloth, 0.46mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
31M&L for spot welding for welding of hinges, handle, bolts etc. to steel widow and ventilators etc. complete all as specified and directed.
32Dismantling/ wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/ slabs/ blankets any thickness including cover fillets complete all as specified and directed.
33M&L for providing PVC WALL PANELLING of 5mm thick consisting of panel of desired size stuck on inner frame work of 50mm wide strips of 5mm thick prelaminated PVC sheet. The panel & strips shall be density of 600 kg/CBM manufactured by ISO-9001-2015 certified company. The strips should have in their centre a gove of 6mm widht and 1mm depth for sinking the head screws used to fix the strip to the wall vertically at an equal interval of 10 inch between two PVC strips. The PVC strips shall be fixed to the wall using 65mm long MS screws through the groove in the strip by using PVC fasteners the distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall optionally a strips of 5mm thick PVC sheets of width 75mm feathered at the edges shall be stuck at the places where two panels are joined using solvent cement complete all as specified and directed.
34M&L for Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605mm x 605mm in true horizontal level, hot dipped galvanised steel section (galvanized @ 120 grams/ Sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required lengthand of size 24mm x 38mm made for 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross 'T' of size 24mm x 28mm made of 0.03mm thick (minimum) sheet, 1200mm long spaced between main \\"T\\" at center to center to form a grid of 1200mm x 600mm and secondary cross \\"T\\" of length 600mm and size 24mm x 28mm made of 0.30mm thick (minimum) sheet to be interlocking at middle of the 1200mm x 600mm panel to form grids of 600mm x 600mm and wall angle of size 24mm x 24mm x 0.4mm. Main \\"T\\" runner to be suspended from ceiling using GI slotted cleats of size 27mm x 37mm x 25mm x 1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rod with galvanised butterfly level clips of size 85mm x 30mm x 0.8mm spaced at 1200mm center to center along main \\"T\\", bottom exposed width of 24mm of all T-section shall be pre-painted with polyester paint for all hights complete all as specified and directed.
35M&L for 4mm thick non-asbestos fibre cement building board and fixed or laid/ inserted to Timber/ GI/ Aluminium framework with screws complete all as specified and directed.
36M&L for 10-12mm thick decorative plaster of paris false celing bending/ moulding as required shape with two coats of plaster emuulsion paint over a coat of primer on decorative surfaces of ceiling including 26 gauge galvanished iron sheet 'c' shaped main member @ 750mm c/c cross member 'U' shape @ 450mm c/c and perimeter of 'c' shaped GI wire 6mm dia or complete all as specified and directed.
37S&F for glazed 12mm thick thoughened glass with frosted film as in door including stainless steel handles not less than 200mm long 02 Nos, floor door spring capable to bear the load/ movement of glass door and suitable locking arrangement locks and all necessary fittings & itching work/ film pasting over glass door including taking down complete all as specified and directed.
38S&F for steel rolling shutters with out ball bearing, as specified including tap/ cover anchoring rod, harp and staple and one coat of primer, erected in position as indicated complete push, pull or manual type of 1.00 thickness of lath, above but gear operated type with bevel gear box and handle and taking down complete all as specified and directed.
39Taking down Shutters of any description exc. 1 Sqm but not exc. 2 Sqm each of any description complete all as specified and directed.
40Taking down Chowkhats or frame of any description not exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specfied and directed.
41Taking down Chowkhats of any description without taking off shutters from the frames exceeding 1.5 Sqm but not exc. 4 Sqm each complete all as specfied and directed.
42Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and as directed.
43M&L for Virified Ceramic tiles 8-10mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
44All as per Srl item No. 43.00 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.
45M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
46All as per Srl item No. 45.00 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.
47M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of 300 x 450 x 7 to 8mm thick in vertical surfaces, as in dado/ skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.
48M&L for 600 x 600 x 15-16mm thick heavy duty Ceramic floor Parking tile laid in floor etc. with 2-3mm thick spacer, joint of spacer is filled with epoxy or as directed, set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.
49Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land complete all as specified and directed.
50M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
51All as per Srl item No. 50.00 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.
52M&L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/ rounding) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
53S&F in repair Vitreous china urinal half stall type of size 245 x 320 x 560mm (or similar size) white colour complete including providing & fixing of plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plug with including 60mm brass screws, with grating and union for discharge pipe including 40mm wast cupling 375mm long PVC connection and waste pipe complete all as specified and directed.
54S&F in repair Vitreous china, water closet rimless one piece EWC with soft close slim seat cover of size 660 x 350 x 745mm concelled s trap for better aesthetic snow white - whiter than whitest complete all as specified and directed.
55Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal from site for pipe complete all as specified and directed.
56S&F, laying and testing for 15mm bore GI tubing medium grade galvanized steel tubing with all fitting such as union, sockets, reducing bends elbows Tee, Checknuts, Caps, Plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specifed and directed.
57Refixing old 15mm GI tubing and connection in new or old position (wall, floor, etc). complete all as specifed and directed.
58M&L for cutting, chases, pinning in block masonry wall for concealed water tubing and making good to facing and pointing in CM 1:3, cutting n. exc. 10 cm girth complete all as specified and directed.
59Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal from site for pipe complete all as specified and directed.
60S&F, laying and testing for 20mm bore GI tubing medium grade galvanized steel tubing with all fitting such as union, sockets, reducing bends elbows Tee, Checknuts, Caps, Plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specifed and directed.
61Refixing old 20mm GI tubing and connection in new or old position (wall, floor, etc). complete all as specifed and directed.
62S&F in repairs Health Faucet ABS with Rubbit Cleaning System , 1.25 m Long Flexible Tube & ABS Wall Hook complete all as specified and directed.
63S&F in repair 15mm dia bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.
64S&F chromium plated shower roses 125mm sizes with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.
65S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and directed.
66S&F in repairs Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed.
67S & F in repairs Toielt Paper Holder Stainless Steel fixed to wall complete all as specified and directed.
68S&F mild steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; angle framework and similar work complete all as specified and directed.
69Dismantling Plain or Corrugated steel sheeting ang gauge, thickness, including Nainital or similar pattern Roof covering complete all as specifed and directed.
70Dismantling wrought iron or mild steel work of any description etc complete all as specified and directed.
71S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.
72S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, Angle, Channel or flat sections) including distance pieces, cleats etc. complete all as specifed and directed.
73S&F Powder coated anodised Aluminium ventilator, half portion of the ventilator covered with 5.5mm thick frosted glasses and half portion fitted with frosted louvers and outer side fitted with mosquito proof galvanised wireness including removing old steel ventilators incl finishes the demolition surfaces with rendering 10-15mm thick CM 1:4 of fair finishes including filling the holdfast holes with PCC 1:2:4 (12.5mm graded aggregate) including 02 coat of cement based paints with primer incl all fittings, accessories etc complete all as specified and directed.
74S&F of Powder coated aluminum three track sliding shutters consisting two Glazed shutters and one guazed shutters (with wire mesh), each shutter width one half of the length of window with the following specifications and making good the adjacent surfaces with brick work and plaster as required at site:-(i) Three way track for sliding shutters of cross section 91.80mm x 31.75mm x 1.30mm thick.(ii) Sliding shutter frame of cross section 40 x 18 x 1.30mm.(iii) Aluminium glazing strip of size 18.2 x 16.66mm.(iv) 4 to 5mm thick float glass superior quality make Modi float for two shutters.(v) IDPE rubber gasket for fixing glass.(vi) Locking cleat concealed per shutter - 01 No.(vii) Two nos sliding rollers per shutter.(viii) Rubber shock absorber - 03 No per shutter.(ix) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for one shutter.(x) Fixing screws for frame with wall - 06 No per window.
75S&F glazed (5.0mm thick plain/ coloured glass) aluminium door powder coated consisting of frame of 63 x 38mm size with shutter fixed on frame both side openable on pivotal arrangement with including necessary cutting holes in wall & floor door shutter consists of top rail size is 83 x 44mm, bottom rail & lock rail size 110 x 44mm & style of door shutter is 83 x 44mm with handles 2 Nos in each door, hinges has fitted on frame as required fixed with rubber gasket & aluminium beading any no of panels with aliminium handle, locking arrangement, floor spring and floor door stopper incl. necessary joining cleats, glazing clips etc. complete all as specified and as directed. (AI section thickness 2mm) confirming to ISI. Make: Jindal Aluminium, Man Industries or equivalent as approved by GE.
76S&F mild steel Framed work such as grills, gratings, gates etc. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; angle framed work and similar work complete all as specified and directed.
77S&F in repair door closer hydraulically regulated designation No-2 universal type of aluminium body fixed to door frames with screws or by welding complete all as specified and directed.
78M&L for Mirror polishing to existing kota stone flooring complete all as specified and directed.
79Dismantling boarding, jallies of any description fixed in any position complete all as specified and directed.
80S&F providing precast cement concrete louvers and jallies, 35mm thick type B-0, 1:2:4 (12.5mm graded aggregate) set in CM 1:4 (mea-sured solid) including all moulding but excluding frame complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58579462
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 25 Lakhs
LAST DATE 08-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair & Maintenance Of False Ceiling, Wall Panelings, Roof Sheet, Rendering Brickwork, Periodical Services & Roof Treatment Including Water Tank Cleaning & Repair Of Rain Water Pipes Under Age B/R-Iv At Ge (Mcte) Mhow
Basic Detail
Tender No GE(MCTE)/MHOW/57(T) OF 2026-27
Bidding Type Tender
Location
City Indore
State Madhya Pradesh
Key Dates
Publish Date 17 Nov 2026
Submission Date 08 Dec 2026
Open Date 10 Dec 2026
Finance
Tender Value 25 Lakhs
Tender Fee 500
EMD 50000
Exemption Not Available
Document List
BOQ_896612.xls
ea809e06-2c66-4be4-a78a-dd72d18c81b4.html
Make57T.pdf
PS-57T.pdf
TD57T.pdf
Tendernotice_1.pdf
Undertaking05T.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 08, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 19 days
Dec 10, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 21 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_896612.xls

html

ea809e06-2c66-4be4-a78a-dd72d18c81b4.html

pdf

Make57T.pdf

pdf

PS-57T.pdf

pdf

TD57T.pdf

pdf

Tendernotice_1.pdf

pdf

Undertaking05T.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender