Defence Statutory Bodies & Commissions/Committees Closing in 16 days TDR #58579457

Tender For Provn Of Ironing & Drying Room Of Inf Bn At Sriganganagar Mil Stn

Issued by Statutory Bodies & Commissions/Committees · Ganganagar, Rajasthan
Tender Value
42.24 Lakhs
Estimated cost
Bid Submission
08 Dec 2026
16 days left
EMD
84480
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ganganagar → Rajasthan
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Provn Of Ironing & Drying Room Of Inf Bn At Sriganganagar Mil Stn

BOQ

Name of Work:- PROVN OF IRONING & DRYING ROOM OF INF BN AT SRIGANGANAGAR MIL STN
Sl. No. Item Description
1Site Clearance & Surface dressing in soft / loose soil complete all as specified and directed by Engineer-in-Charge.
2Removing excavated soil (Soft/hard dense soil) to a distance n exc 50m, depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge.
3Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m in all kind of soil complete all as specified and directed by Engineer-in-Charge.
4Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dence soil complete all as specified and directed by Engineer-in-Charge.
5M&L for 'Anti termite treatment (Pre treatment) treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed by Engineer-in-Charge.
6M&L for 'Anti termite treatment (Pre treatment) Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed by Engineer-in-Charge.
7M&L for 'Anti termite treatment (Pre treatment) Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed by Engineer-in-Charge.
8M&L for providing cement concrete 1:4:8 type D2 (Using 40mm graded stone agg) in foundation, mass concrete and filiings complete all as specified and directed by Engineer-in-Charge.
9M&L for providing reinforcement cement concrete, M-25 (using 20mm graded stone agg)as in footing, foundation,beams, plinth beams, base for columns and mass concrete etc complete all as specified and directed by Engineer-in-Charge.
10M&L for providing reinforcement cement concrete, M-25 (using 20mm graded stone agg) as in columns complete all as specified and directed by Engineer-in-Charge.
11M&L for providing reinforcement cement concrete, M-25 (using 20mm graded stone agg) as in beams, cantilevers, bressumers, lintel over 1.5m span complete all as specified and directed by Engineer-in-Charge.
12M&L for providing reinforcement cement concrete in M-25 (using 20mm graded stone agg) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engineer-in-Charge.
13M&L for providing reinforcement cement concrete, M-25 (using 20mm graded stone agg) as in Chajja complete all as specified and directed by Engineer-in-Charge.
14S&F mild steel TMT bars 10mm dia and over , cut to length, bent to shape requred, including crancing bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed by Engineer-in-Charge.
15S&F mild steel TMT bars 6 to 8 mm dia , cut to length, bent to shape requred, including crancing bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed by Engineer-in-Charge.
16S&F mild steel TMT bars 6 to 10mm dia a as in stirrups, spacers and binders complete all as specified and directed by Engineer-in-Charge.
17M & L for Form work flat rough finished surfaces to side of concrete in fdns, footing base, base of columns, side and soffits of plinth beam and simillar work complete all as specified and directed by Engineer-in-Charge.
18M & L for Form work Form work flat rough finished surfaces of concrete to sides of columns complete all as specified and directed by Engineer-in-Charge.
19M & L for Form work to side and soffits of floor beams. Lintel beam, roof beam , landing, waist slabs, chajja railing and similar work complete all as specified and directed by Engineer-in-Charge.
20M & L for Form work flat rough finished surfaces of concrete to soffits of suspended slabs such as roof slabs, floor slabs landings and similar works not exc 200mm thick (Horizontal or slopping) complete all as specified and directed by Engineer-in-Charge.
21M & L for Form work flat rough finished surfaces of concrete to Chullah hood Chajja, troughs and similar items including edges complete all as specified and directed by Engineer-in-Charge.
22M & L for Form work rough finished surfaces of concrete to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls and similar works exc 10cm but n. exc 20cm wide complete all as specified and directed by Engineer-in-Charge.
23M&L 15mm plaster in CM 1:3 while the concrete is green with approved water proofing compound in proportion as recommended by the manufacturer (Waterproofing compound measured and paid saperately) complete all as specified and directed by Engineer-in-Charge.
24Supply only integral water proofing compound complete all as specified and directed by Engineer-in-Charge.
25M & L brick work with Fly Ash old size bricks straight or curved on plan exceeding 6.0m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information
26M & L brick work with Fly Ash old size bricks straight or curved on plan exceeding 6.0m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58579457
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 42.24 Lakhs
LAST DATE 08-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provn Of Ironing & Drying Room Of Inf Bn At Sriganganagar Mil Stn
Basic Detail
Tender No CA NO CWE SGNR/TOKEN-78 OF 2026-27
Bidding Type Tender
Location
City Ganganagar
State Rajasthan
Key Dates
Publish Date 17 Nov 2026
Submission Date 08 Dec 2026
Open Date 09 Dec 2026
Finance
Tender Value 42.24 Lakhs
Tender Fee 500
EMD 84480
Exemption Available
Document List
4e2df27d-d934-4ddc-b059-039f7f991df6.html
BOQ_896609.xls
Tendernotice_1.pdf
Tender_78.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 08, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 16 days
Dec 09, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 17 days

Tender Documents

Download All (ZIP) ↓
html

4e2df27d-d934-4ddc-b059-039f7f991df6.html

xls

BOQ_896609.xls

pdf

Tendernotice_1.pdf

pdf

Tender_78.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender