Tender For Provn Of 10 X Ewc, 10 X Bathroom & 02 X Urinal Point Near Bldg No E-92 (Or Line) At 43 Fd Regt Under Age B/R-Iv And Age E/M-Ii Of Ge (South) Meerut Cantt.
Tender Value
24.28 Lakhs
Estimated cost
Bid Submission
08 Dec 2026
17 days left
EMD
48560
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of 10 X Ewc, 10 X Bathroom & 02 X Urinal Point Near Bldg No E-92 (Or Line) At 43 Fd Regt Under Age B/R-Iv And Age E/M-Ii Of Ge (South) Meerut Cantt.
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing n exc 15 cm deep incl site clearance in soft/ loose soil complete all as specified and directed. |
| 2 | Excavation in trenches not exc. 1.5 meter wide and not exc. 1.50 metre in depth for foundation etc and for manholes etc n.exc. 10 Sqm on plan and n.exc. 1.5 metre depth and getting out in soft/loose soil complete all as specified and directed. |
| 3 | Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed. |
| 4 | Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in soft/loose soil complete all as specified and directed. |
| 5 | M & L for broken bricks hardcore of gauge exc 63mm but n exc 100mm,deposited, spred and levelled in layers n exc 15 cm thick watered and rolled /rammed to a true surface. complete all as specified and directed. |
| 6 | Material & labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed. |
| 7 | Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat rough finshed surfaces of concrete complete all as specified and directed. |
| 8 | Use and waste of Form work of sides of pillars, posts, struts, piers, columns etc square or rectangular or polygonal rough finish surfaces of concrete complete all as specified and directed. |
| 9 | M&L Form work to sides and soffits of beams lintels etc flat rough finshed surfaces complete all as specified and directed. |
| 10 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick flat rough finished surfaces of concrete. complete all as specified and directed. |
| 11 | M&L for form work to the edge of concrete flat n. exc 200 mm thick Complete all as specified and directed. |
| 12 | Supply & fix mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 13 | Supply & fix mild steel TMT bars 5 mm dia and over upto and including 10mm dia as in stirrups complete all as specified and directed. |
| 14 | M&L RCC M 25 (Design mix) using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete Complete all as specified and directed. |
| 15 | M & L RCC M 25 (Design mix) using 20 mm graded stone aggregate as in Columns, pillars etc Complete all as specified and directed. |
| 16 | M & L RCC M 25 (Design mix) using 20 mm graded stone aggregate as in beams, lintels over 1.5 m span etc complete all as specified and directed. |
| 17 | M&L for RCC M 25 (Design mix) using 20 mm graded stone aggregate for roof slabs supported on walls, beams and the like. complete all as specified and directed. |
| 18 | Material & labour brick work with fly ash bricks in CM 1;6 brick straight or curved on plain exeeding 6m mean radiuscomplete all as specified and directed. |
| 19 | Material & labour for brick work with fly ash bricks in CM 1;6 brick straight or curved on plain to any Radius in Half brick thick wall complete all as specified and Directed. |
| 20 | Material & labour for 10 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 21 | M & L for applying 15 mm thick rendering in CM 1:4 on brick / concrete surfaces of external walls finished even and smooth without using extra cement using water proofing compound @ 3% by weight of cement or as per manufacturer instructions, complete all as specified and directed Note:- Water proofing compound shall be measured and paid sepratly |
| 22 | Material & labour for 5 mm thick plaster in CM 1:3 on ceiling surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 23 | M&L 75 mm thick cement concrete 1:4:8 type D-2 using (40 mm graded stone agg) as in sub base complete all as specified and directed. |
| 24 | M&L non-skid coloured ceramic tiles of size 400x400x6-7mm thick, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified & directed. |
| 25 | M&L for glazed coloured ceramic tiles of size 600x300x6-7mm/450x300x6-7mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:6 complete all as specified & directed. |
| 26 | M&L 75mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in path /plinth protection , finish even & smooth without using extra cement complete all as specified and directed. |
| 27 | M&L for preparation of new plastered surfaces of walls etc and applying two coats of cement base paint over a coat of primer complete all as specified & directed. |
| 28 | M & L for preparation of new plastered surfaces of walls and applying three coat of white wash complete all as specified and directed. |
| 29 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified & directed. |
| 30 | M& L for PCC padding 1:2:4 type B1(using 20 mm graded stone aggregate) average thickness 25mm,finished fair and even without using extra cement on roof surfaces complete all as specified and directed. |
| 31 | M&L for 20 mm thick cement paster in CM 1:4 mixed with WPC @ 3% of the weight of cement finised even and smooth without using extra cement on roof surface when concreate is green and wall (WPC will be measured and paid seperately as supply only rate). complete all as specified and directed. |
| 32 | Supply only integral water proofing compound complete all as specified and directed. |
| 33 | Material & labour for cleaning of plastered /concrete surfaces and applying priming coat using bituminous primer @ 0.30 Kg/Sqm. followed by evenly a tack coat @ 1.20 Kg/Sqm. using with 85/25 grade bitumen, over laid with 3mm thick APP modified polymeric water proofing membrane with non woven polyester reinforced of weight not less than 3.6 Kg/Sqm. unrolled and bonded to substance with side and end laps 75mm and 100mm as per manufacturer’s instructions and finished top of APP water proofing polymeric membrane with a coat of hot blown industrial bitumen 85/25 grade @ 1.20 Kg/Sqm and finally finished with a coat of bituminous aluminium paint @ 0.20 Kg/Sqm complete all as specified and directed. |
| 34 | S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (including MS Hold Fast). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed. |
| 35 | S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge complete all as specified and directed.. |
| 36 | Supply & fix 125mm size aluminium alloy handles cast type anodized complete all as specified & directed. |
| 37 | S&F aluminium tower bolts 150mm long, of extruded section Complete all as specified and directed. |
| 38 | S&F 300mm long MS sliding door bolts, bolt type, stove enamelled black, with bright bolts not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 39 | S&F for 75 mm bore PVC floor traps plain with grating and including jointing complete all as specified & directed. |
| 40 | Supply and fix PVC bends 110mm bore, any radius complete all as specified & directed. |
| 41 | Supply & fix steel windows or ventilators fixed type including hold fast, complete all as specified & directed. |
| 42 | S&F mild steel framed work such as grills, gratings guard bar etc with ends of bars shouldered and/ or riveted etc complete all as specified and directed. |
| 43 | Supply & fix 3mm thick sheet glass, pin headed, and glazing with oil putty/beading in square not exceeding 0.50sqm each pane complete all as specified & directed. |
| 44 | S&F Gun metal,globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed for 20 mm pipe. complete all as specified and directed. |
| 45 | S & F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified & directed. |
| 46 | S&F chromium plated towel rail 20mm dia D type 600mm long as approved quality complete all as specified & directed. |
| 47 | S&F for stainless steel cloth hanger as approved quality complete all as specified & directed. |
| 48 | S&F 15mm stop valves chromium plated fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed. |
| 49 | S&F 15mm stop valves chromium plated fancy type, with long shunk and cup (Concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed. |
| 50 | Supply & fix rotational moulded polyethylene water storage tanks 1000 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings complete all as specified and directed. |
| 51 | Supply & fix in PVC low level flushing cistern of 9-10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed. |
| 52 | S & F white plastic seat cover for WC ( E.T ) white including MS CP or aluminium hinging device complete all as specified and directed. |
| 53 | Supply, fix 15mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed. |
| 54 | Supply, fix 20 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed. |
| 55 | S&F brass chromium plated shower roses with swivel joints of 125mm size complete all as specified & directed. |
| 56 | S&F butt hinges, medium weight cold rolled 100 mm long of mild steel, complete all as specified & directed. |
| 57 | Supply & fix in PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed. |
| 58 | Supply & fix PVC ball valves, high pressure with polyethylene float and fly nut complete screwed for iron pipe 20mm bore complete all as specified & directed. |
| 59 | S&F in Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified & directed. |
| 60 | S & F Flush pipe of polyethylene or low or high density of PVC, 32 mm dia, for low level cistern Complete all as specified and directed. |
| 61 | S&F in health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 62 | S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 63 | S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed in walls complete all as specified and directed. |
| 64 | S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 65 | S&F PVC (SWR), junction single, (Single T) equal or unequal 110 mm bore Complete all as specified and directed. |
| 66 | S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 67 | PVC (SWR), junction single, (Single T) equal or unequal 75 mm bore Complete all as specified and directed. |
| 68 | S & F chromium plated 15 mm long body bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 69 | S&F vitreous china ovel shaped wash hand basin, white, including brackets, coupling all arragements suitable for 15mm dia pipe complete all as specified & directed. |
| 70 | Supply and fixing PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed. |
| 71 | S&F swan neck pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified & directed. |
| 72 | S&F fancy type bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 73 | S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including hanging arrangements, bracket, complete all as specified and directed. |
| 74 | S&F vitreous china urinal partition white size 310 x 770 mm complete all as specified and directed. |
| 75 | S&F waste coupling of PTMT (half or full threaded) suitable for urinals (Minimum weight 32mm-45gms) complete all as specified and directed. |
| 76 | S&F urinal spreader complete all as specified and directed. |
| 77 | M&L for 18-20mm thick black granite stone slab machine cut in cooking platform, jams, pillars, windows cills, Shelves and the like laid over and including 15mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed. |
| 78 | S&F in repair 18/19mm thick WPC Solid board, exterior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination, fixed with SS screws to WPC frame work in cupboards, and kitchen cabinet rebated completed all as specified and directed. |
| 79 | S & F 40mm S & F Continuous (piano) hinges, brass, bright finish or electrogalvanised complete all as specified and directed. |
| 80 | M&L for DWCPE (SN8) 180mm outer dia and 163 inner dia of sewage/ drain pipe ring fit/ push fit laid in trenches and jointed as specified complete all as specified and directed. |
| 81 | M&L Cement concrete in foundations, filling and mass-concrete in PCC 1:4:8 Type D-2 (using 40 mm graded stone aggregate). completed all as specified and directed. |
| 82 | Material & labour brick work with fly ash bricks in CM 1;6 brick straight or curved on plain exeeding 6m mean radius completed all as specified and directed. |
| 83 | M&L Rendring 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 Complete all as specified and directed. |
| 84 | M&L PCC(1:3:6) type C1 as in benching to man hole complete all as specified and directed. |
| 85 | Septic tanks , exc in ordinary soil, fdn in PCC 1:2:4, brick work in CM 1:4, RCC slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame vent shaft and sludge chambers etc complete for 100 users. completed all as specified and directed. |
| 86 | Soakage well exc, in ordinary soil, fdn in PCC1:3:6, wells of Hony combed and solid in M-25 concrete, including intercepting chamber, screen chamber brick work in CM, RCC cover slab in M-25 RR masonry/ filling with brick bats, complete of size 3.0m dia x 3.00m deep completed all as specified and directed. |
| 87 | M & L for precast RCC 1:2:4 type B-1(using 20mm graded stone aggregate)for manhole cover including placing and set in CM 1:6 completed all as specified and directed. |
| 88 | M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in bed bricks, coping etc including weathering slightly rounded or chamfered angles and throating making groves for fixing of manhole cover including necessary form work completed all as specified and directed. |
| 89 | Surface dressing n exc 15 cm deep incl site clearance in soft/ loose soil complete all as specified and directed. |
| 90 | Providing and laying 60mm thick factory made Precast cement concrete Grey colored, of size (100x100)mm cobble paver blocks of M-35 Grade confiring to IS 15658-2021 with approved design and pattern, thickness and size/shape, made by table vibratory method using rouber moulds with strong vibratory compaction over and including 25 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; including necessary cutting of road suface to fixing the paver, removing of debries and compaction etc, complete all as specified and directed. |
| 91 | M&L 75 mm thick cement concrete 1:3:6 type C-2 using (40 mm graded stone agg) as in sub base completed all as specified and directed. |
| 92 | S&F Providing and laying at or near ground level factory made kerb stone of nominal mix (1:2:4) cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 93 | M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in bed bricks, coping etc including weathering slightly rounded or chamfered angles and throating making groves for fixing of manhole cover including necessary form work completed all as specified and directed. |
| 94 | Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 PVC insulated, unsheathed copper conductor cable in and including PVC surface conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3.0 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for one Tube light/bulb/street light/ Ex fan point controlled by one, one way switch 05 / 06 Amps. |
| 95 | All as per item No 80.00 here-in-before but One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch. |
| 96 | All as per item No 80.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board. |
| 97 | Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified and directed. |
| 98 | Supply & fixing socket outlet 3 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed. |
| 99 | Supply & fixing switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified and directed. |
| 100 | Supply & fixing of socket outlet 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified and directed. . |
| 101 | Supply and fixing decorative wall mounted LED tube light fitting 20 watt with polycarbonate housing and integrated electronic driver with all accessories and fixing material complete all as specified and directed. |
| 102 | Supply and fixing lamp holder , PVC / polycarbonate type back plate suitable for batten fitting complete with 1 x LED lamp 15 watt. complete all as specified and directed. |
| 103 | Supply & fixing of ceiling rose, 3 terminal PVC polycarbonate isolated body complete all as specified and directed. |
| 104 | Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLSH- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all MS conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note:- One meter of conduit along with 2x6 sq mm wire and one 6.0 sq mm earth shall be measured as one unit length. |
| 105 | Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 08 way, with 100 Amps rated . complete all as specified and directed. |
| 106 | Supply & fixing MCB SPN, AC, 240 volts of 40 to 63 Amps, C curve, 10 kA, complete all as specified and directed. |
| 107 | Supply and fixing MCB SP, AC, 240 volts of 06 to 40 Amps, C curve, 10 kA, complete all as specified and directed. |
| 108 | Supply and fixing LED building security light fitting 1x35 Watt luminaries with die cast aluminium housing comprising epoxy poweder coated enclosed with glass cover in frame with high power LED white lamp of capacity 35 watt including brackets of 32 mm dia GI pipe medium grade upto 0.6 mtr long bend to required shape including flat iron clamps- 02 Nos with suitable size of nuts and bolts including grouted in wall complete all as specified and directed. |
| 109 | Supply & fixing in repair industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 32 Amps MCB, single pole, AC, 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as specified and directed. |
| 110 | Supply and fixing exhaust fan steel body AC single phase 230 V of size 300mm sweep with blade , frame and lauvers complete all as specified and directed. |
| 111 | Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 10 Sqmm 2.0 core armoured, PVC sheathed with aluminium conductor heavy duty. complete all as specified and directed. |
| 112 | Supply / laying and fixing 40mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed. |
| 113 | M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling and hard punning complete all as specified and directed. |
| 114 | Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysDec 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender