Defence Statutory Bodies & Commissions/Committees Closing in 16 days TDR #58579448

Tender For Repair And Maintenance Of External & Internal Electric Supply, Water Supply And Geyser At Pdde (Nc) Office And Residential Complex Under Ge (Af) Jammu

Issued by Statutory Bodies & Commissions/Committees · Jammu, Jammu and Kashmir
Tender Value
16.29 Lakhs
Estimated cost
Bid Submission
08 Dec 2026
16 days left
EMD
33000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair And Maintenance Of External & Internal Electric Supply, Water Supply And Geyser At Pdde (Nc) Office And Residential Complex Under Ge (Af) Jammu

BOQ

Name of Work:- REPAIR AND MAINTENANCE OF EXTERNAL & INTERNAL ELECTRIC SUPPLY, WATER SUPPLY AND GEYSER AT PDDE (NC) OFFICE AND RESIDENTIAL COMPLEX UNDER GE (AF) JAMMU
Sl. No. Item Description
1Attending complaints for checking of existing electrical points wiring upto size 6 sqmm in any Buildings for continuity ,no light including carrying out minor repairs etc as required to make the item functional and replacing burnt wire ends, small pieces of wire, tightning of loose connections etc all as specified.Note- Contractor has to deploy Qualified Electrician and Helper with all necessary tools on all working days to the complaint cell and complaints will be attended on the same day itself. Recovery for non attending complaints will be three times rate quoted by the Contractor. Note : (a) Contractor shall provide his tadesmen/labour along with necesary tools to rectify defects from 0830 to 1700 Hrs on all working days. (b) One complaint shall be considered as Each Jobc) The contractor shall depute ITI holder electrician & semi skiilled helper to attend complaits, with proper uniform as finalised by Engr-in-Charge, with name tag. (d) Material required for attending complaints will be given as supply only item.( e) Any parts required to be replaced shall be replaced and paid separately as \\"supply only \\" against relevant item (s) of this schedule. (f) Taking down the 'Supply only' item is included in the rate quoted against of Sl item No. 1 of BOQ.
2Taking down carefully copper/aluminium point wiring (light, fan,bell, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc . credit for above items should be made as per conditions separately complete all as specified and directed by Eng-in-Charge.
3M&L for point wiring for light/fan/Bell with FRLS cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping or existing conduit with all accessories and 1.50 sqmm green in colour PVC copper conductor cable for earth continuity connected to common earth dolly incl PVC box surface/ flush type with PVC sheet for mounting fittings such as switches, sockets, fan regulators etc complete all as specified and directed for one light/fan /bell point controlled by one switch & making good to disturbed surface of wall etc.complete all as specified and directed by Eng-in-Charge.
4All as per item No.3 above but for one multipin 5 amps socket outlet on same board.
5All as per item No.3 above but for one multipin 5 amps socket outlet on independent board
6All as per item No. 3 above but with 2.5 sqmm cable and 2.5 sqmm for earth continuity for multipin 15 amps socket outlet flush type on independent board.
7M&L switch piano button flush type, single pole one way 5 amps complete all as specifed and directed by Eng-in-Charge.
8M&L switch bell push piano flush button single pole one way 5 amps complete all as specifed and directed by Eng-in-Charge.
9M&L piano switch two way flush button SP 16 amps complete all as specifed and directed by Eng-in-Charge.
10M&L 5 pin socket outlet 2 in 1, 3 pin, 5 amps flush type complete all as specifed and directed by Eng-in-Charge.
11M&L 5 pin switch socket combination 2 in 1, 5 amps flush type complete all as specifed and directed by Eng-in-Charge.
12M&L switch socket combination 5 in 1, 5 and 16 Amp flush type controlled by one switch complete all as specifed and directed by Eng-in-Charge.
13M&L ceiling rose, 3 phase on PVC square blocks surface bakelite 65 x 50 mm, 3 terminal complete all as specifed and directed by Eng-in-Charge.
14M&L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete complete all as specifed and directed by Eng-in-Charge.
15M&L flush type fan regulator 230V, electronic rotary stepped complete all as specifed and directed by Eng-in-Charge.
16M&L Call bell ding dong AC, 230 Volts, single pole type complete all as specifed and directed by Eng-in-Charge.
17M&L Switch Modular (piano) flush button single pole one way 6 amps 1 module with suitable plate and cover complete all as specified and directed by Eng-in-Charge.
18M&L Switch Modular (piano) flush button single pole one way 16 amps with suitable plate and cover complete all as specified and directed by Eng-in-Charge.
19S&F Socket outlet flush modular (piano) type 5 pin 6 Amps with suitable plate and cover complete all as specified and directed by Eng-in-Charge.
20S&F in repair Socket outlet flush universal modular (piano) type 6 pin 6/16 Amps with suitable plate and cover complete all as specified and directed by Eng-in-Charge.
21Supply only three modular sheet fitting.complete all as specified and directed by Eng-in-Charge.
22Supply only four modular sheet fitting.complete all as specified and directed by Eng-in-Charge.
23Supply only Six modular sheet fitting.complete all as specified and directed by Eng-in-Charge.
24Supply only twelve modular sheet fitting.complete all as specified and directed by Eng-in-Charge.
25M&L for sub main wiring with two run of 6 sqmm single core multi stranded PVC insulated and unsheathed copper conductor (red for phase and black for neutral) of grade 1100 volt FRLS cable in and including electrical grade PVC conduits of desired colour not less than1.2 mm thick and 25 mm wide & 6 sqmm copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly incl taking down old unserviceable one.complete all as specified and directed by Eng-in-Charge.
26S&F LED tube light fitting 18/20 watt wall mounted LED batten with aluminum housing & integrated electronic driver complete all as specifed and directed by Eng-in-Charge.
27S&F LED tube light fitting 9/10 watt wall mounted LED batten With aluminum housing & integrated electronic driver complete all as specifed and directed by Eng-in-Charge. .
28S&F in repair by flushing to walls MCB distribution board Double door SPN 230 volts 12 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls as previous condition complete all as specifed and directed by Eng-in-Charge.
29S&F in repair by flushing to walls MCB distribution board Double door SPN 230 volts 8 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls as previous condition complete all as specifed and directed by Eng-in-Charge.
30S&F in repair by flushing to walls MCB distribution board double door 240 volts 4 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls etc as previous condition complete all as specifed and directed by Eng-in-Charge.
31S&F in repair Distribution board iron clad VTPN DB, double door with IP-43 1K-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar. Make-Legrand Cat pt No 5077 20 or equivalent of make L&T / Merlin Gerin multi-9 complete including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge (Note: MCB's and MCCB will be measured and paid separately under relevent items)
32S&F MCB SP 6 to 32 Amps, 240 Volts complete all as specifed and directed by Eng-in-Charge.
33S&F MCB SPN upto 32 Amps ,240 Volts complete all as specifed and directed by Eng-in-Charge.
34M&L MCCB TPN 100 Amps ,415 Volts complete all as specifed and directed by Eng-in-Charge.
35M&L MCB SPN 63 Amps, 230 Volt complete all as specifed and directed by Eng-in-Charge..
36M&L TPN 63 Amps 415 Volt complete all as specifed and directed by Eng-in-Charge..
37M&L in repair metal socket enclosure with 240 volt MCB 20 Amps, with metal plug top complete all as specifed and directed by Eng-in-Charge.
38Supply only 10 Watt energy efficient wall mouted LED Bulk head luminaire made off die cast aluminium with opal diffuser complete all as specifed and directed by Eng-in-Charge.
39Supply only 36 watts recess /pendant mounting ultraslim LED flat panel 2' X 2' made of extruded aluminium frame with high LEDs & glare free opal diffuser complete all as specifed and directed by Eng-in-Charge.
40Supply only round sheet for blank area 2.5 \\" dia and 3 \\" complete all as specifed and directed by Eng-in-Charge.
41S&F MCCB Three pole 415V 125 Amps 16 kA incl taking down old unserviceable one complete all as specifed and directed by Eng-in-Charge.
42S&F MCCB Three pole 415V 200 Amps 25 kA incl taking down old unserviceable one complete all as specifed and directed by Eng-in-Charge.
43S&F MCCB Three pole 415V 250 Amps 25 kA incl taking down old unserviceable one complete all as specifed and directed by Eng-in-Charge.
44S&F PVC electrical insulation tape width 25-30mm and length 35-40 mtrs. complete all as specifed and directed by Eng-in-Charge.
45S&F 9 watts LED Bulb complete all as specifed and directed by Eng-in-Charge.
46S&F 18 way modular box complete all as specifed and directed by Eng-in-Charge.
47S&F 14 way modular box complete all as specifed and directed by Eng-in-Charge.
48S&F 12 way modular box complete all as specifed and directed by Eng-in-Charge.
49S&F 6 way modular box complete all as specifed and directed by Eng-in-Charge.
50S&F 4 way modular box complete all as specifed and directed by Eng-in-Charge.
51S&F 3 way modular box complete all as specifed and directed by Eng-in-Charge.
52Taking down carefully the existing unserviceable ceiling / Exhaust fans/ Wall mounted fan of any make/ model and sweep from different sites in the building for overhauling / servicing after disconnecting carefully cleaning and checking unserviceable components, and replacing the defective components such as bearing, rubber bush/bolt, gunmetal bush, capacitor burnt windings flexible cord, shaft and painting etc., including assembling after lubricating the movable components and installing in its original position connecting, testing and commissioning all as specified and directed by the Engineer-in-charge. Note:-Bearing/ Gunmetal bush/ rubber bush bolt/ capacitor / cord flexiable / stator/rotor and painting only will be measured and paid separately under respective item.
53M&L for rewinding of ceiling fans 1200/1400mm sweep of any make/model, including removal of existing burnt windings carefully from the slots,cleaning the slots thoroughly with necessary cleaning agent, applying slot insulation and rewinding with super enmelled copper winding wire of same gauge/same number of turns as that of existing and connecting the coils suitable to operate on 230 volts single-phase AC supply permanent capacitor type, tying the windings and applying air dry insulating varnish and drying the windings including replacing the defective components such as bearing, gun metal bush,rubber bush/bolt, capacitor,flexible cord, shaft and painting including assembling after lubricating movable components complete including testing complete all as specified and directed by Eng-in-Charge. for :- Note :-(1) Fan will be issued from AGE E/M store yard through gate pass.(2) Bearing/ Gunmetal bush/ rubber bush bolt/ capacitor / cord flexiable / stator/rotor and painting only will be measured and paid separately under respective item.
54All as per item no 53 above but exhaust fan of 450/375/300mm sweep of any model/make complete all as specifed and directed by Eng-in-Charge.
55All as per item no 53 above but Wall mounting fan of any sweep , any model/make complete all as specifed and directed by Eng-in-Charge.
56S&F ceiling fans complete with aluminium blades, down rods, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 5.00 BEE Five star rated with brushless direct current motor (BLDC ) with high efficenecy as specified, complete all as specified and directed by Engr-in-charge.
57Supply only fan motor 150W 1500 RPM suitable for Exhaust fans of any Sweep any make / model all as specified and directed by the Engineer-in-charge.
58S&F steel body heavy duty exhaust fan 300mm complete acessories with suitable copper wire including taking down old unserviceable burnt exhaust fan complete all as specified and directed by Eng-in-Charge.
59S&F pvc exhaust fan 250mm complete acessories with suitable copper wire including taking down old unserviceable burnt exhaust fan complete all as specified and directed by Eng-in-Charge.
60S&F galvanised/aluminium metal sheet frame exhaust fan flappe shutter outdoor type of size 20x20 inches having no chance of rusting including nuts,bolts,screws.etc. flappe is fitted to any height/floor of building complete all as specified and directed by Engineer-in-charge.
61S&F ball bearing suitable for any fans of any Sweep any make / model all as specified and directed by the Engineer-in-charge.Make TATA, SKF
62S&F gunmetal bush suitable for ceiling fan / wall mounting fan of any make/model/ sweep of 1200/1400 mm and Exhaust fan of any sweep all as specified and directed by the Engineer-in charge.
63S&F PVC flexible pipe of dia 25mm all as specified and directed by the Engineer-in-charge
64S&F capacitor of 2.5 Mfd. AC 230/240 volts, 50 Hz complete all as specifed and directed by Eng-in-Charge.
65S&F capacitor of 3.15 Mfd. AC 230/240 volts, 50 Hz complete all as specifed and directed by Eng-in-Charge.
66S&F capacitor of 4.0 Mfd. AC 230/240 volts, 50 Hz complete all as specifed and directed by Eng-in-Charge.
67S&F of PVC canopies of suitable size for ceiling fan of any make/model(set of two) with screws complete all as specifed and directed by Eng-in-Charge.
68S&F U clamps with rubber reel and nuts/bolts of suitable size with pins complete all as specifed and directed by Eng-in-Charge.
69S&F of rubber bush kit suitable for exhaust/wall mounting fan of any make/sweep complete all as specifed and directed by Eng-in-Charge.
70Taking down existing louvers from any location or any height of bldg. with safety and re-fixed after repair with fastner complete all as specifed and directed by Eng-in-Charge.
71Supply only of metallic / plastic louversof size 21\\" x 21\\" for 350mm/450mm/300mm sweep exhaust fan including fixing arrangment i.e. nuts , bolts, washers etc. complete all as specified and directed by Engr-in Charge.
72S&F only Modular regulator electronic rotary step type suitable for ceiling fan of sweep 1200/1400 mm complete complete all as specifed and directed by Eng-in-Charge.
73Taking out of old unserviceable PVC under ground LT cable of any size and type fixed on pole, wall or laid in floors, trenches, across road crossing etc ,including taking out of cable covers of precast PCC / RCC slab or brick cover etc setting aside serviceable materials in safe custody for reuse and or unserviceable materials consider as schedule of credit complete all as specifed and directed by Eng-in-Charge. Note:- i). Dismantling of clamps nuts bolts etc, taking out of GI pipe in cable protection shall be measured and paid seperately under respective item of this schedule.ii).Cost for making good the disturbed surfaces of floors / walls in cement mortar 1:3 shall deemed to be included in the unit rate quoated . However cost for making good the disturbed surfaces of roads with PCC and hard core filling is out of scope of this work and shall be measured and paid separetely
74Supply , laying , testing & Commissioning UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm, 4 core, with taking down old cable complete all as specified and directed by Engr-in-Charge.
75Ditto as per item No-74but size 16 sq mm, 4 core.
76Ditto as per item No-74 but size 25 sq mm, 3.5 core.
77Ditto as per item No-74 but size 35 sq mm, 3.5 core.
78Ditto as per item No-74 but size 50 sq mm, 3.5 core.
79Ditto as per item No-74 but size 70 sq mm, 3.5 core.
80Supply and laying of DWC (Double wall corrugated) HDPE pipe, ISI marked, IS-14930 Part-II, having outer dia as 77 mm and inner dia as 63mm, with smooth internal surface and profiled external surface for non pressure under ground cable including all connected accessories/fittings such as coupler, 'O' ring, etc. for protection of under ground cable complete all as specified and directed by Engr-in-Charge.
81Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in any type of soil for laying of LT UG cables complete all as specifed and directed by Eng-in-Charge.
82Returning, filling in, including spreading levelling, watering and well ramming in layers not exceeding 25 cm thick in hard dense soil complete all as specifed and directed by Eng-in-Charge.
83Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specifed and directed by Eng-in-Charge.
84M&L for Cutting through existing road surfaces i.e. surfacing PCC soling etc, and making trench of minimum 500mm wide 100cm in depth along the cross section of road for laying of pipes or UG cables, including returning filing in, well ramming & removal of surplus spoil to a distance not exc. 50 mtrs & repairs to road surfaces to match with existing specification after laying the pipes/cable etc. complete all as specifed and directed by Eng-in-Charge.
85S&F LT cable joint kit straight through heat shrinkable complete with jointing materials suitable for LT Armoured cable 4 core of size 25 to 50 Sqmm complete all as specifed and directed by Eng-in-Charge.
86S&F LT cable joint kit straight through heat shrinkable complete with jointing materials suitable for LT Armoured cable 4 core of size 70 to 95 Sqmm complete all as specified and directed by Eng-in-Charge.
87S&F AL thimbles in replacement suitable for under ground LT cables of following sizes including cutting of exsting burn/dammaged cable after disconnecting from exsting position ,extending the cable from cable loop including neccesory earth work and reconnecting the same.complete all as specified and directed by Eng-in-Charge.Size of 16 Sqmm
88All as per Item No. 88 but size 25 Sqmm
89All as per Item No. 88 but size 70 Sqmm
90All as per Item No. 88 but size 95 Sqmm
91S&F PVC insulated sheathed service wire twin core 10 Sqmm aluminium solid conductor 1100 volts grade incl taking down old unserviceable one complete all as specifed and directed by Eng-in-Charge..
92S&F MCCB 250 Amps 4 pole 36 KA with Sheet metal encloser with adjustable thermal and fixed magnetic setting, fixed in repairs complete all as specified and directed by Eng-in-Charge.
93S&F MCCB 200 Amps 4 pole 36 KA with Sheet metal encloser with adjustable thermal and fixed magnetic setting, fixed in repairscomplete all as specified and directed by Eng-in-Charge.
94S&F MCCB 160 Amps 4 pole 36 KA adjustable thermal and fixed magnetic setting, complete all as specified and directed by Eng-in-Charge.
95Repair of existing street light/Security light of any type or discription, fixed in vertical position with poles/wall/Boundry wall including disconnecting the electric connection, removing from pole/wall/Boundry wall if required, carrying out minor repairs like disconection of wire/cable, detecting and repair of UG cable fault, cleaning of carbon on OH/UG line and replacing starter/fuses,etc as required at site to make the items functional and refixing the same at same location or any other location, connecting with electric feeder and testing for functioning engaging sufficient man power and tool and plant etc to ensure safety of light/pole as well as working persons complete all as specified and directed by Eng-in-Charge.Note : (i) The un-serviceable items shall be replaced under respective items of relevent schedule as below .(ii) T&P viz tools , Trolly mounted transportation veh with operator, ladder any type are provided by the contractor to the electrician party. (iii) The contractor shall be rectified the street light complaint on priority within the 04 hrs. One complaint shall be considered as one Job.(iv) Everyday one electrician and one helper shall be check all Street light & security light whole the area of PDDE (NC) Jammu.(v) All safety precaution will be taken by the Electrician/Helper incase of any lapse contractor will be responsible for the same.(vi) Before climbimg on parameter light contractor shall ensure that there is no power supply on parameter fencing/ wall boundary by concerned power house PDDE.(vii) In addition with domestic area & office premeses complaints contractor shall attend the compaints of all if there is any emergency or requirement.
96S&F in repair LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermalmanagement in multiple optics complete with IP 65/66 protection complete including making electric connections using two run of 1.5 sqmm single core unarmoured wire from junction box, fixed in repairs,CA No also engaved on street light complete all as specified and as directed by Engr-in-Charge.
97S&F in repair LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal ,management in multiple optics complete with IP 65/66 protection complete including making electric connections using two run of 1.5 sqmm single core unarmoured wire from junction box, fixed in repairs,CA No also engaved on street light complete all as specified and as directed by Engr-in-Charge.
98S&F LED street light fitting 120 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal ,management in multiple optics complete with IP 65/66 protection complete including making electric connections using two run of 1.5 sqmm single core unarmoured wire from junction box, fixed in repairs,CA No also engaved on street light complete all as specified and as directed by Engr-in-Charge.
99S&F SMC Junction box, hot press moulded , front openable, side hinge, and fixed with mechnical fasteners of size 250x200x100 mm suitable for 3 Phase 4 wire system incl Aluminium bus bar of suitable rating complete all as specified and directed by Eng-in-Charge.
100M&L for Preparation of old painted surface of 9 Mtr. steel tubular poles above the top of PCC coping. Painting of pole from top of coping to a height of 1.5mtr with two coats of synthetic enamel paint as per user. painting the pole of (approx length 8 mtr) including painting of cross arms/clamps etc complete with two coats of synthetic enamel aluminium paint and to the entire satisfaction of Engineer-in-Charge
101M&L for Preparation of old cement based painted surfaces of RCC pole 9 mtr by cleaning of deposited materials, and painting with one coat of exterior emulsion weather coat paint of approved make and colour above the top of PCC coping. Painting of pole from top of coping to a height of 1.5mtr with two coats of synthetic enamel paint in white and sky blue alternate strip complete all as specified and directed by Engineer-in-Charge Please Enable Macros to View BoQ information
102M&L for Preparation of old cement based painted surfaces of RCC pole 9 mtr by cleaning of deposited materials, and painting with one coat of exterior emulsion weather coat paint of approved make and colour above the top of PCC coping. Painting of pole from top of coping to a height of 1.5mtr with two coats of synthetic enamel paint in white and sky blue alternate strip complete all as specified and directed by Engineer-in-Charge Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58579448
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 16.29 Lakhs
LAST DATE 08-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair And Maintenance Of External & Internal Electric Supply, Water Supply And Geyser At Pdde (Nc) Office And Residential Complex Under Ge (Af) Jammu
Basic Detail
Tender No CA NO GE/AFJ-73/2026-27
Bidding Type Tender
Location
City Jammu
State Jammu and Kashmir
Key Dates
Publish Date 17 Nov 2026
Submission Date 08 Dec 2026
Open Date 15 Dec 2026
Finance
Tender Value 16.29 Lakhs
Tender Fee 500
EMD 33000
Exemption Available
Document List
BOQ_896539.xls
cfedace7-afcd-4686-8c69-fcbb4fb7549b.html
Tender73.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 08, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 16 days
Dec 15, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 23 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_896539.xls

html

cfedace7-afcd-4686-8c69-fcbb4fb7549b.html

pdf

Tender73.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender