Tender For Periodical Services To Perimeter Security Wall Of Tech Area At Garuda Naval Base Kochi Under Gw(Nw) Kochi
Tender Value
40 Lakhs
Estimated cost
Bid Submission
08 Dec 2026
18 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services To Perimeter Security Wall Of Tech Area At Garuda Naval Base Kochi Under Gw(Nw) Kochi
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on Brick/Concrete wall and ceiling including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed by Engineer-in-Charge. |
| 2 | M&L for preperation of old decorated surfaces of walls including cornices and applying one coat of cement base paint complete all as specified and as directed by Engineer-in-Charge. |
| 3 | M&L for preperation of new plastered surfaces of walls including cornices and applying two coat of cement base paint over a coat of primer complete all as specified and as directed by Engineer-in-Charge. |
| 4 | M&L for preparation of old external surfaces of wall and applying one coat of premium acrylic emulsion paint, alkali & fungal resistance, dirt resistance exterior paint of required shade complete all as specified and as directed by Engineer-in-Charge. |
| 5 | M&L for preparation of newly plastered external surfaces of wall and applying two coats of premium acrylic emulsion paint, alkali & fungal resistance, dirt resistance exterior paint of required shade over and including priming coat of alkali resistant exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed by Engineer-in-Charge. |
| 6 | M&L for complete removal of existing treatment of external surface using water jet, mechanical grinders including rubbing washing down with water etc and applying two coats of weather proof (antifungal) paint, alkali & fungal resistance, dirt resistance exterior paint of required shade over and including priming coat of alkali resistant exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed by Engineer-in-Charge. |
| 7 | M&L for complete removal of old decorated surfaces of walls including cornices preparation of surfaces and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed by Engineer-in-Charge. |
| 8 | M&L for preperation of old decorated surfaces of walls including cornices and applying one coat of distemper oil emulsion complete all as specified and as directed by Engineer-in-Charge. |
| 9 | M&L for preperation of old painted steel surfaces of any description over 10cm width or girth and applying one finishing coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. |
| 10 | M&L for site cleaning by removing of bushes, shurbs and vegetation and making the surface clean face clean by removing the waste to a distance excluding 50 mtr and not exceeding 250 mtr and deposited where directed complete all as specified and as directed by Engineer-in-Charge. |
| 11 | Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation etc and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-Charge. |
| 12 | Returning filling in including spreading levelling watering and well ramming of soil in layers n.exc 25 cm thick complete all as specified and as directed by Engineer-in-Charge. |
| 13 | Removing excavated material from drains exc 1.50 Km but n. exc 5.00 Km above the starting point depositing where directed complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Demolition and breaking-up of 100 mm nominal dia unserviceable SGW, AC,PVC or re-inforced concrete, set in cement mortar including PCC haunching complete and removing to a distance not exc 50 meter complete all as specified and as directed by Engineer-in-Charge. |
| 15 | Demolition and breaking-up of 300 mm nominal dia unserviceable SGW, AC,PVC or re-inforced concrete, set in cement mortar including PCC haunching complete and removing to a distance not exc 50 meter complete all as specified and as directed by Engineer-in-Charge. |
| 16 | M&L for concrete bed to 110mm bore dia of drain pipes incl packing under and haunching against the sides of the pipes after they are laid and tested in PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate complete all as specified and as directed by Engineer-in-Charge. |
| 17 | M&L for concrete bed to 300mm bore dia of drain pipes incl packing under and haunching against the sides of the pipes after they are laid and tested in PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate complete all as specified and as directed by Engineer-in-Charge. |
| 18 | M&L for 110mm dia PVC pipe single socketed with rubber ring joints in any length laid in trenches & jointed with collars complete all as specified and directed. |
| 19 | M&L for reinforced concrete pipes 300mm dia, class NP2, laid iin trenches & jointed with collars complete all as specified and directed. |
| 20 | Demoiltion of brickwork of stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and as directed by Engineer-in-Charge. |
| 21 | M&L for pre-cast cement concrete block masonry with solid blocks of cement concrete exc. 10 cm width and setting in cement mortar 1:4 type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) complete all as specified and as directed by Engineer-in-Charge. |
| 22 | M&L for rendering 15mm thick in cement mortar 1:4 on fair face of brick work or concrete surfaces, finished even and smooth with out using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 23 | S&F in repair Euro Guard Pro square UPVC rain water gutter or equivalent 180mm dia, with all necessary fittings, joining compounds, clamps, nut, bolts end cap, corner drop, centre drop or screws etc and fixing in position, at any height complete all as specified and as directed by Engineer-in-Charge. |
| 24 | S&F in repair 150mm bore PVC (SWR) rain water pipes , with all necessary fittings (except bend), joining compounds, clamps, nut, bolts or screws etc and fixing in position, at any height complete all as specified and as directed by Engineer-in-Charge. |
| 25 | S&F 150mm bore PVC (SWR) bends, any radius, fixed with rubber ring joints at any height complete all as specified and as directed by Engineer-in-Charge. |
| 26 | S&F in repair 110mm bore PVC (SWR) rain water pipes single socketed , with all necessary fittings (except bend), joining compounds, clamps, nut, bolts or screws etc and fixing in position, at any height complete all as specified and as directed by Engineer-in-Charge. |
| 27 | S&F 110mm bore PVC (SWR) bends, any radius, fixed with rubber ring joints at any height complete all as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysDec 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender