Tender For Repairs To Cyclone Shelter At Sadayankadu In Vettaikaraniruppu Panchayat.
Tender Value
7.44 Lakhs
Estimated cost
Bid Submission
08 Dec 2026
19 days left
EMD
7440
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagapattinam → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Cyclone Shelter At Sadayankadu In Vettaikaraniruppu Panchayat.
BOQ
| Sl. No. | Item Description |
| 1 | 01.Repairs to Cyclone Shelter at Sadayankadu in Vettaikaraniruppu Panchayat. |
| 2 | Clean removal cement plaster from walls and clearing away from the site including all labour charges etc., |
| 3 | Dismatling brick work and clearing away from the site including all labour charges etc., |
| 4 | Plastering in CM 1:5 ,12mm thick including cost and conveyance of all materials to work site and all labour charges etc., complete. |
| 5 | Pointing CM 1:3 for Pressed tiles including cost and conveyance of all materials to work site and all labour charges etc., complete. |
| 6 | Brick work in CM 1:5mix using country bricks of size 8 3/4 x 4 1/4 x 2 1/4\\" including cost and conveyance of all materials to worksite, including labour for watering, with good water within 200m lead for good water, including all labour and all other incidental charges etc. complete |
| 7 | White washing two coats using shell lime including cost and conveyance of all materials to site and all labour charges etc complete |
| 8 | Painting the plastered wall surfaces with two coats oil bound distemper (inside the building) of approved quality and colour over one coat of wall primer including clearing surface in all floors etc complete with standard specification |
| 9 | Painting the newly plastered wall surface with two coats of colour emulsion outside the building over one coat of cement primer including clearing the surface in all floors etc., complete as per standard specification. |
| 10 | Painting old wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete |
| 11 | Painting old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) including all labour charges etc., |
| 12 | Supply and fixing of single box type 4'22W LED fitting complete with built in driver and clamps to fix on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting including all labour charges etc., |
| 13 | supply and fixing of 1200mm sweep AC ceiling fan complete with stepped electronic regulator with 300mm down rod on the existing clamp SD 106 |
| 14 | SUB Estimate:New Septic tank:Earth work excavation in all classes of soils and depositing on bank with initial lead and lift soils such as sand or other loose soil wet sand not under water silt and ordinary soil sandy loom, and hard stiff, black cotton soil, as per SS- 20 B etc., complete |
| 15 | Filling with river sand into foundation and basement including cost and conveyance of sand to worksite including labour for filling, watering within 200m lead for good water, including tampling if necessary and all labour and all other incidental charges including all labour charges etc., |
| 16 | Cement concrete 1:4:8 mix using 40mm ISS size HBG metal from approved quarry including cost and conveyance of all materials to worksite, including labour for mixing, laying, the concrete the concrete watering with 200m lead for good water, and compacting including all labour charges etc., |
| 17 | Brick work in CM 1:5mix using country bricks of size 8 3/4 x 4 1/4 x 2 1/4\\" including cost and conveyance of all materials to worksite, including labour for watering, with good water within 200m lead for good water, including all labour and all other incidental charges etc. complete |
| 18 | Supply and errecting centering and strutting including necessary supports for plane surface in foudation and basement in all floors for RCC columns, footing pedestals, plinth beam, Critical pier etc., using mild steel angles of size 90 x 60 x 10 cm gauge stiffened welded with mild steel angles of size 25 mm x 25mm x 3 mm for boarding laid over silvr oak joist ( Country wood) of size 10 cm to 6.50 cm spaced at 75 cm centre to centre complete complying with standard specification and as directed as per clause MOST specification. |
| 19 | Reinforced Cement concrete 1 :1.5 :3 mix using 20mm HBG metal for Flooring including consolidating as per standard specification curing etc., complete and rendering the top rough to take the floor finish.The rate is to include necessary planking for panelling into bays wherevre necessary as directed by the departemental officer. |
| 20 | Supplying and fabrication to steel including cost and conveyance of steels from godown to worksite including labour for cutting, jointing and welding is necessary including labour dying with binding wire and labour for palcing in position as directed by including all labour charges etc., |
| 21 | Plastering with CM 1:5, 12mm thick including cost and conveyance of all material to work site and all labour charges etc., complete |
| 22 | Providing 75mm PVC vent cowl arrangements mosquito proof nylon net and as directed including all labour charges etc., |
| 23 | Sanitary arrangements 110mm dia pvc pipe |
| 24 | Sanitary arrangements PVC Elbow 110mm dia |
| 25 | Sanitary arrangements PVC Tee 110mm dia |
| 26 | Sanitary arrangements PVC Bend 110mm dia |
| 27 | SUB Estimate:Mother Baby Feeding Room Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 3.50 x 2.88m. The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 5.5mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., includingnecessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing etc... complete complying with standard specification and as directed bythe deparmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use. |
| 28 | Supplying and fixing Medium Density Fibre board (SBG I) of exterior gradeof following type with thickness conforming to IS 12406 / 2003 with necessary adhesive and C.P. screws, including fixing of aldrops, tower bolts, hinges and lock strike plates, putty, fevical, varnish for T.W. lipping with thinner colouring agent etc., The rate includes cost of materials and cost for furniture fittings such as 3 nos SS 304 Grade Butt Hinges of size (125mm x 30mm), 1 no Alu. aldrop 250 x 16mm, 2no Alu. tower bolt of 300x12mm and 1 no Alu. tower bolt of 200x12mm, 2 Nos Alu. Handles, 1 no door stopper with rubber bush incase of Single leaf door cost of labour charges for fixing in position etc., complete. All Aluminium furniture fittings are to be anodised with matt finish under electrically controlled condition in accordance with ISI specification 1868/1968 for anodic film thickness of not less than 15 microns, The rate is inclusive cost of fevical and fixing charges, transportation, loading, unloading and all other incidential charges, handling charges etc., complete complying with standard specificationand as directed by the departmental officers - Single leaf Door Shutter Type (1 nos) |
| 29 | Provision for Wall mount Fan 400mm including all labour and all other incidental charges etc. complete M-1355 |
| 30 | Provision for Plastic Chair arrangment including all labour and all other incidental charges etc. complete (Standard Company) |
| 31 | SUB Estimate:RAIN WATER HARVESTING (2Nos):Earthwork Excavation in Hard Soil - Earthwork excavating and depositing including all labour charges etc., |
| 32 | Collection and supply of Sand and filling into the basement including cost and conveyance to the site and all labour charges for filling as per standard specification. |
| 33 | Filling the soak pit with 40mm metal as per specification |
| 34 | Filling the soak pit with 20mm metal as per specification |
| 35 | Cement mortar 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete |
| 36 | Brick work in cement mortar 1:5 mix using country bricks 83/4\\"x41/4\\"x23/4\\" and conveyance of all materials to site and all labour charges etc complete |
| 37 | Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc |
| 38 | Supplying laying and jointing PVC pipe above ground level (External) 110mm dia |
| 39 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysDec 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender