Public Administrative Department Government Departments Closing in 4 days TDR #58577921

Tender For Construction Work Of One Room In Jawahar Navodaya Vidyalaya Milkhi

Issued by Government Departments · Kushi Nagar, Uttar Pradesh
Tender Value
13.50 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
4 days left
EMD
27000
Bank guarantee accepted
Document Fee
2336
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kushi Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Work Of One Room In Jawahar Navodaya Vidyalaya Milkhi

BOQ

Name of Work:- Jawahar Navodaya Vidyalaya Milkhi me Ek Adad Kaksh ka Nirman Karya
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. (D.S.R 2.8.1)
2Providing and laying in position specified grade of 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). (D.S.R 4.1.8)
3Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (D.S.R.5.1.2)
4Same as above in item No 3 but for Slabs and Cantilever slabs as per Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (D.S.R.5.3)
5Same as above in item No 3 but for Column as per 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (D.S.R.5.2.2)
6Providing and laying in position specified grade of Thermo-Mechanically Treated bars of grade Fe-500D or more. (D.S.R.5.22.6)
7Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) (D.S.R.6.1.2)
8Same as above in item No 10 but in super structure for wall of one brick thickness Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in super structure above plinth level.Cement mortar 1:6 (1 cement : 6 coarse sand) (D.S.R.6.4.2)
9Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)(D.S.R.6.13.2)
1012 mm thick plaster with 1:6 cement and coarse sand morter on brick work including ranking and joint washing and cleaning and including supply of all materials labour and T&P etc. required for proper completion of work. (D.S.R.13.4.2)
11Same as above in item No 10 but for plaster on rough face .(D.S.R.13.5.2)
12Steel work In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete(D.S.R.10.25.1)
13Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (D.S.R.9.21)
1435 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (D.S.R.9.21.1)
15Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift.(D.S.R.2.25)
16Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.(D.S.R.2.27)
17Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm As per (D.S.R 11.41.2)
18Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) (D.S.R.13.47.1)
19Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :
20New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre (D.S.R.13.41.1)
21Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture (D.S.R.13.48.2)
22Supply and fixing of sign board including supply and cost of all material, labour T&P required templet as directed by the Engineer Incharge.
23Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.( DSR 1.3.3)
24Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. Power plug wiring in PVC cunduct (4x4 sqmm ) DSR NO.1.12
25Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface /recessed medium class PVC conduit as required.
262 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire (DSR 1.14.1)
272 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (DSR 1.14.2)
28Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. As requird
295/6 A Switch DSR NO.1.24.1
3015/16 A Switch DSR NO.1.24.3
31Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate and switch box including connections but excluding modular plate est. As required DSR NO.1.25
32Supplying and fixing of following ways surface/ recess mounting vertical type 415 V , TPN MCB distribution board of sheet steel, dust protected , duly powder painted inclusive of 200 A Tinned copper bus bar for mounting MCBS (BUT WITHOUT MCBs and incorner) As required.(Note:- Vertical type MCB TPND is normaly use-1 where 3 phase outlets are required )
334 Way (4+12), Double door DSR NO.2.5.1
34Supply, Installation, Testing and Cornmissioning of 1200 mm sweep, BEE 5 star rated, ceilling fan withBrush Less Direct Current (BLDC) Motor, class of insulation :b, 3 nos blades, 30 cm long down rod, 2 nos canopies shackle kit safety rope copper winding, Power Factor not less than 0.9, Service Value (cm/m/w) minimum 5.00, Air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS:374-2019) THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories inclunding safety pin, nut-bolts, washers, temperature rise=75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply , earthing etc complete as required DSR NO.19.1
35GST @ 18% Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58577921
AUTHORITY Government Departments
TENDER VALUE 13.50 Lakhs
LAST DATE 23-11-2026
Authority
Authority Name Rural Engineering Department
Work Description Tender for Construction Work Of One Room In Jawahar Navodaya Vidyalaya Milkhi
Basic Detail
Tender No 1624/RED/TENDER /KUSHINAGAR
Bidding Type Tender
Location
City Kushi Nagar
State Uttar Pradesh
Key Dates
Publish Date 18 Nov 2026
Submission Date 23 Nov 2026
Open Date 23 Nov 2026
Finance
Tender Value 13.50 Lakhs
Tender Fee 2336
EMD 27000
Exemption Not Available
Document List
ba6d49cd-9e14-4add-a7ec-afe7b003fae1.html
BOQ_2297102.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Nov 23, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
html

ba6d49cd-9e14-4add-a7ec-afe7b003fae1.html

xls

BOQ_2297102.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender