Housing Urban and Rular Development Government Departments Closing in 7 days TDR #58577728

Tender For N.H. Construction Of 1 X 2.00 X 2.00 M Box Culvert And Access Road In Place Of Sakri And Damaged Bridge At Chainage 0.150 Road From 28 To Nidura.

Issued by Government Departments · Ayodhya, Uttar Pradesh
Tender Value
27.60 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
7 days left
EMD
2.76 Lakhs
Bank guarantee accepted
Document Fee
880
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ayodhya → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for N.H. Construction Of 1 X 2.00 X 2.00 M Box Culvert And Access Road In Place Of Sakri And Damaged Bridge At Chainage 0.150 Road From 28 To Nidura.

BOQ

Name of Work:- N.H. Construction of 1 x 2.00 x 2.00 m box culvert and access road in place of Sakri and damaged bridge at chainage 0.150 road from 28 to Nidura.
Sl. No. Item Description
1Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.
2Providing and laying of 1000 mm dia hume pipe including Labour T&P etc complete
3Dismantling of reinforcement cement concrete or reinforcment brick work including stacking of material as per directed by Enc (SI 694)
4Earth work in excavation for foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.
5Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.
6Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.
7Providing concrete for reinforced concrete in open foundation complete as per drawing and technical specification . RCC grade M-25.
8Providing concrete for reinforced concrete in Sub structure complete as per drawing and technical specification . RCC grade M-25.
9Providing and laying reinforced cement concrete in superstructure as per drawing and technical specification . RCC grade M-30.
10Providing and laying reinforced cement concrete in superstructure as per drawing and technical specification . RCC grade M-30.
11Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications.
12Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications .
13Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications .
14Providing, fitting and placing Drainage Spouts 100mm dia in Slab with all fixtures as per Technical Specifications 2705 of MoRT&H.
15Providing and laying boulders apron on bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification.
16Back filling behind abutment wing wall and return wall complet as per Drawing and technical specification clauses1204.3.8 .
17Providing weep holes in Brick Masonary/plain/Reinforced concrete abutment,wing wall return wall with 100 mm dia AC pipe extending through the full width of the structure with slope of 1V:20 H towards drawing foce. complete as per drawings and Technical Specifications
18Providing ,Laying ,spreading and compacting stone aggregates of 63-45 mm size to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with Smooth wheel roller 80-100 KN in stages to proper grade and camber ,applying and brooming ,Stone screening,binding materials to fill up theinterstices of coarse aggregate ,watering and compacting to the required density
19Providing ,Laying ,spreading and compacting stone aggregates of 53-22.4 mm size to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with Smooth wheel roller 80-100 KN in stages to proper grade and camber ,applying and brooming ,Stone screening to fill up the nterstices of coarse aggregate ,watering and compacting to the required density
20Brick edging on both sides of the road with first class bricks 8 cm wide & 12 cm deep laid with mudmortar including labour & supply of bricks finished to required template and in proper alingment and also including dressing & ramming the excavated earth as directed by the Engineer - in -charge.
21Providing and applying primer coat with bitumen emulsion (SS) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70kg/sqm usingmannual means .
22Providing and applying tack coat with BitumenVG-10 using bitumen distributor at the rate of 0.30 kg. per Sqm on the prepared old nonbituminous surfaces treated with Hydraulic broom as per Technical Specification Clause 503 also including cost of emulsion, labour T&P etc. required for proper completion of the work as per direction by Engineer In charge.
23Providing, laying and rolling of open-graded premix carpet of 20 mm thickness compesed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be following by Seal Coat of either Type-C as per Technical Specification Clause 508 Mord
24Providing and laying Seal Coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 Mord Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58577728
AUTHORITY Government Departments
TENDER VALUE 27.60 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for N.H. Construction Of 1 X 2.00 X 2.00 M Box Culvert And Access Road In Place Of Sakri And Damaged Bridge At Chainage 0.150 Road From 28 To Nidura.
Basic Detail
Tender No 3893/nivida Dt. 05.11.2026
Bidding Type Tender
Location
City Ayodhya
State Uttar Pradesh
Key Dates
Publish Date 17 Nov 2026
Submission Date 26 Nov 2026
Open Date 26 Nov 2026
Finance
Tender Value 27.60 Lakhs
Tender Fee 880
EMD 2.76 Lakhs
Exemption Available
Document List
2db0566d-ceae-4585-8f15-a774446ede79.html
BOQ_2296833.xls
t1bridge.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 7 days
Nov 26, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

2db0566d-ceae-4585-8f15-a774446ede79.html

xls

BOQ_2296833.xls

pdf

t1bridge.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender