Power Boards / Undertakings / PSU Closing in 14 days TDR #58577008

Tender For Providing Gi Sheet Roofing And Replacement Of Window Glazing With Polycarbonate Panels At Peppara Small Hydro Electric Project.

Issued by Boards / Undertakings / PSU · Thiruvananthapuram, Kerala
Tender Value
16.23 Lakhs
Estimated cost
Bid Submission
03 Dec 2026
14 days left
EMD
40600
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvananthapuram → Kerala
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Providing Gi Sheet Roofing And Replacement Of Window Glazing With Polycarbonate Panels At Peppara Small Hydro Electric Project.

BOQ

Name of Work:- Providing GI Sheet Roofing and Replacement of Window Glazing with Polycarbonate Panels at Peppara Small Hydro Electric Project.
Sl. No. Item Description
1Dismantling aluminium / Gypsum partitions, doors, windows,fixed glazing and false ceiling including disposal of unserviceable surplusmaterial and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge
2Steel work in built up tubular (round, square or rectangularhollow tubes etc.) trusses etc., including cutting, hoisting, fixing positionand applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
3Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up toplinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
4Providing and fixing precoated galvanised iron profile sheets(size, shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) withEPDM seal, complete upto any pitch in horizontal/ vertical or curvedsurfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
5Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm)
6Providing and fixing 15cm wide, 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3 mm size, bolts, nuts andwashers etc., including making necessary connections with rain water pipes complete.0.63 mm thick with zinc coating not less than 275 gm/ m2
7Providing & fixing Poly carbonate plain sheet 2.50 mm thick as approved by the Engineer in charge. The sheets shall be fixed using self drilling/ self tapping screw with aluminium beading including cutting to size and shapes where ever required. details of cost for 1 sqm.
8Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, allcomplete as per architectural drawings and the directions of Engineer-incharge.(Glazing, paneling and dash fasteners to be paid forseparately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
9Supplying at site:Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming & painting to be paid for separately)
10Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides
11Supplying and fixing MS plate of size 200 x 200 x 8 mm as base plate of columns/verticals of roof work with required holes( 4 Nos of 20 mm dia, 125mm long) for holding down bolts to the existing concrete by drilling holes to the existing concrete for a depth of 10cm and grouting withchemical solution, fixing the vertical member to the base plate at all elevation including cost of labour, materials, drilling,chemical solution,all lead, lift, scaffolding, plate, nuts, bolts but excluding cost of vertical member and its fixing charge etc.and embbeded the base in a concrete block of size 50 x 50 x 60 cmusing cement concrete 1:2:4. complete as per the direction of the Engineer in charge
12Welding by gas or electric plant including transportation of plant at site etc. complete.
13Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in positionand applying a priming coat of approved steel primer all complete.
14Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58577008
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 16.23 Lakhs
LAST DATE 03-12-2026
Authority
Authority Name Kerala State Electricity Board
Work Description Tender for Providing Gi Sheet Roofing And Replacement Of Window Glazing With Polycarbonate Panels At Peppara Small Hydro Electric Project.
Basic Detail
Tender No TENDER/2026-27/2302/3 dt. 17-11-2026
Bidding Type Tender
Location
City Thiruvananthapuram
State Kerala
Key Dates
Publish Date 17 Nov 2026
Submission Date 03 Dec 2026
Open Date 05 Dec 2026
Finance
Tender Value 16.23 Lakhs
Tender Fee 5000
EMD 40600
Exemption Not Available
Document List
BOQ_1520614.xls
d58d7b03-de7a-4130-939d-8baa951dc4e5.html
TENDERDOC.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 03, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 14 days
Dec 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 16 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_1520614.xls

html

d58d7b03-de7a-4130-939d-8baa951dc4e5.html

pdf

TENDERDOC.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender