Public Administrative Department Government Departments Closing in 4 days TDR #58576887

Tender For Annual Plan-Kjp 830/2026-274-Vellamanal Ghss Maintanance -Mayyanad Panchayth-General Civil Work

Issued by Government Departments · Kollam, Kerala
Tender Value
16.94 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
4 days left
EMD
42400
Bank guarantee accepted
Document Fee
2760
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kollam → Kerala
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Annual Plan-Kjp 830/2026-274-Vellamanal Ghss Maintanance -Mayyanad Panchayth-General Civil Work

BOQ

Name of Work:- Annual Plan-KJP 830/2026-274-VELLAMANAL GHSS Maintanance -Mayyanad Panchayth-General Civil Work
Sl. No. Item Description
1vellamanal school Maintenance
22.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
34.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
45.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
55.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)
65.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
74.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
813.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
950.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
1050.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
1112.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
1213.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
13OD237025/2026-2027:Providing and fixing stainless steel molding letter for a height of 20 cm including cost,conveyance and fixing charges etc complete as per the direction of the department officers atsite
14OD237273/2026-2027:Supplying and fixing Granite Name board 60cm* 70 cm on existing surface
1512.41.1:Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter
16OD269640/2026-2027::Supplying and Fixing square UPVC gutter 160 mm size. with MS Flats 25mm x 5mm size @ 60cm c/c fixing on Roof Members ( Purlins or Rafter), bolts, nuts and washers etc., including making necessary connections with rain water pipes complete Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58576887
AUTHORITY Government Departments
TENDER VALUE 16.94 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Local Self Government Department
Work Description Tender for Annual Plan-Kjp 830/2026-274-Vellamanal Ghss Maintanance -Mayyanad Panchayth-General Civil Work
Basic Detail
Tender No 06/EE/LIDEW/KLM/26-27
Bidding Type Tender
Location
City Kollam
State Kerala
Key Dates
Publish Date 17 Nov 2026
Submission Date 26 Nov 2026
Open Date 30 Nov 2026
Finance
Tender Value 16.94 Lakhs
Tender Fee 2760
EMD 42400
Exemption Available
Document List
5876b655-9a97-4cdd-a354-486eb80fe658.html
BOQ_1520153.xls
sbd830.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Nov 30, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 8 days

Tender Documents

Download All (ZIP) ↓
html

5876b655-9a97-4cdd-a354-486eb80fe658.html

xls

BOQ_1520153.xls

pdf

sbd830.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender