Educational and Research Institute Government Departments Closing in 6 days TDR #58576882

Tender For Construction Of Compound Wall And Sheet Roofing Of Waiting Area At Smart Village Office,Pavithreshwaram

Issued by Government Departments · Kollam, Kerala
Tender Value
15.58 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
6 days left
EMD
38974
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kollam → Kerala
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of Compound Wall And Sheet Roofing Of Waiting Area At Smart Village Office,Pavithreshwaram

BOQ

Name of Work:- Construction of compound wall and Sheet Roofing of Waiting Area at Smart Village office,Pavithreshwaram
Sl. No. Item Description
1RETAINING WALL AND COMPOUND WALL - CIVIL WORKS
215.9.2: Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges: In cement mortar
315.7.4Demolishing brick work manually / by mechanical means including stacking ofserviceable material and disposal of unserviceable material within 50 metres lead asper direction of Engineer-in-Charge.In cement mortar
415.3: Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer-in-Charge.
52.8.1Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including gettingout the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
64.1.8Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
75.2.2: Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3(1 cement: 1.5 coarse sand: 3 graded stone aggiregate 20 mm nominal size derived from natural sources)
85.9.6: Centering and shuttering including strutting, etc. and removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts
95.22.6: Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
10OD36120/2024-2025: Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6*12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) up to plinth level with: Cement mortar 1:6 (1 cement: 6 coarse sand) (Excluding Cost of rubble)
117.1.1: Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6*12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement: 6 coarse sand)
1250.18.7.6.1: Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10 Kfg/cm - Internal work- Exposed on wall
1350.6.2.2: Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 (1 cement: 6 coarse sand) etc complete
1413.1.1: 12 mm cement plaster of mix: 1:4 (1 cement: 4 fine sand)
1513.33.1: Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand): Flush/ Ruled pointing
1613.43.1: Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer
1713.47.1: Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
1810.16.1: Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
19OD36268/2024-2025: Providing and fixing Sliding gate accessories like O grooved wheels with double bearing, Upper Guiding, Bottom track (galvanized steel) which can be bolted down to the concrete surface. Handles, stopper, Lock, Anchor bolt etc including all materials and labour charges etc complete, as per the direction of Engineer in Charge.
2013.61.1: Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work
21RETAINING WALL AND COMPOUND WALL - CIVIL WORKS
2250.10.1: Steel work in built up G I tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
2350.10.2: Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
2412.50: Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
25OD36292/2024-2025: Providing and fixing 8'' UPVC Aqua pathy (Gutter) with M.S clamp all complete as per direction of Engineer-in-Charge.
26RETAINING WALL AND COMPOUND WALL - CIVIL WORKS
272.1.1: Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed: All Kinds of soil
2851.2.3: Filling with Quarry Muck Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade
2916.68: Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58576882
AUTHORITY Government Departments
TENDER VALUE 15.58 Lakhs
LAST DATE 25-11-2026
Authority
Authority Name Kerala State Nirmithi Kendra
Work Description Tender for Construction Of Compound Wall And Sheet Roofing Of Waiting Area At Smart Village Office,Pavithreshwaram
Basic Detail
Tender No KSNK/TECH/KTR/SVOP-169(R)/2026
Bidding Type Tender
Location
City Kollam
State Kerala
Key Dates
Publish Date 17 Nov 2026
Submission Date 25 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 15.58 Lakhs
Tender Fee 2500
EMD 38974
Exemption Available
Document List
4f0b79c1-1460-4170-91a4-36a75265612e.html
agrrrrr.pdf
BOQ_1520884.xls
epaymentform.pdf
tendercondeeetion.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 8 days

Tender Documents

Download All (ZIP) ↓
html

4f0b79c1-1460-4170-91a4-36a75265612e.html

pdf

agrrrrr.pdf

xls

BOQ_1520884.xls

pdf

epaymentform.pdf

pdf

tendercondeeetion.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender