Tender For Special Repair To Building No P-35 (Hav Accn) Against Job No W/Srw/P-35/2026-27 At Khundru Grn Under Ge 861 Ews
Tender Value
33.23 Lakhs
Estimated cost
Bid Submission
10 Dec 2026
18 days left
EMD
66500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No P-35 (Hav Accn) Against Job No W/Srw/P-35/2026-27 At Khundru Grn Under Ge 861 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Plain cement concrete in ground floor and paving not exc 15 cm thick (below or abov)ground level complete all as specified and direceted by Engineer-in-Charge.. |
| 2 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof covering complete all as specified and directed by Engineer-in-Charge. |
| 3 | Dismantling wall and ceiling boards (fibre, pulp, insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge. |
| 4 | Dismantling timber fillets in frame work , rails posts rafts, purliens etc under 40 sqm in section in complete all as specified and directed by Engineer-in-Charge. |
| 5 | Demolition of brickwork or stone/ boulder masonary, biult in cement mortar including all quoins, arches, pillars etc but excluding asshlar facings,dressed stonework and precast concrete article complete all as specified and directed by Engineer-in-Charge.. |
| 6 | Dismantling timber scantling 40 sqcm and over in section in any position in framed work complete all as specified and directed by Engineer-in-Charge. |
| 7 | Taking down chowkats or frames with shutter(without taking off shutters from the frames) not exc 1.5 sqm each and removing from site complete all as sepcifed and directed by Engineer-in-Charge. |
| 8 | Description all as per serial item No 7 above but exc 1.5 sqm and n.exc 4 sqm complete all as specified and directedby Engineer-in-Charge. |
| 9 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premishes complete all as specified and directed by Engineer-in-Charge. |
| 10 | Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed by Engineer-in-Charge. |
| 11 | Supply and Fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour and profile having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 12 | Supply and Fixing Pre-painted galvalume aluminium zinc coating GI based Plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 13 | Material and Labour second class hard wood (clean sawn) in scantling in frame work complete all as specified and directed by Engineer-in-Charge. |
| 14 | Supply and Fixing 6 mm thick Veneered Decorative Playwood Grade 1(with BWR resin ) with decorative face veneers on one face fixed with screws to timber frame work complet all as specified and directed by Engineer-in-Charge. |
| 15 | Material and Labour 2nd class hard wood plain fillets, square , rectangular or triangular in section, clean sawn,secured with nails of sectional area exc 13 & n.exc 25 Sqcm complete all as specified and directed by Engineer-in-Charge. |
| 16 | Material and Labour 2nd class hard wood plain fillets, square , rectangular or triangular in section, clean sawn,secured with nails of sectional area exc 6 & n.exc 13 Sqcm complete all as specified and directed by Engineer-in-Charge. |
| 17 | Material and Labour Preparing surfaces of wood and wood based materials, new and old, of any description and girth, not otherwise described and treated with cresote oil complete all as specified and directed by Engineer-in-Charge. |
| 18 | Material and labor for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 19 | Description all as per serial item no.18. here-in- before but except bricks complete all as specified and directed by Engineer-in-Charge. |
| 20 | Taking down cement plaster on brick or stone walls or concrete surface etc including raking out joints, hacking for key scrubbing down with water complete all as specified and directed by Engineer-in-Charge. |
| 21 | Material and Labour rendering 15mm thick on fare faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed Engineer-in-Charge. |
| 22 | Material and labour for Rendering 5mm thick in Cement Mortar 1:3 , on concrete surfaces of ceiling , finish even & smooth and Taking down cement or cement lime plaster from brick wall or concrete surfaces etc including racking out joints, hacking for key & scrubbing down with water etc including removing rubbish material from site and thrown in low lying empty area complete all as specified and directed by Engineer-in-Charge. |
| 23 | Material and Labour rendering 15mm thick on fare faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 24 | Material and Labour preparing newly plastered surfaces of wall and applying two coats of oil bound distemper over one coat primer on walls over 3mm thick of wall putty complete all as specified and directed Engineer-in-Charge. |
| 25 | Material and Labour preparing newly plastered surfaces of wall and applying two coats of Cement base paint and over one coat primer on walls complete all as specified and directed by Engineer-in-Charge. |
| 26 | Material and Labour preparing newly plastered surfaces of ceiling and applying two coats of wite wash complete all as specified and directed by Engineer-in-Charge. |
| 27 | Material and Labour Complete removel of existing treatment and applying two coat of cement base paint over a coat of primer complet all as specified and directed by Engineer-in-Charge. |
| 28 | Supply only integral Waterproofing compound complete all as specified and directed by Engineer-in-Charge. |
| 29 | Supply and Fixing Pressed stel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock, strike plate etc complete all as specified and directed by Engineer-in-Charge. |
| 30 | Description all as per serial item No 29 above but 105x60mm complete all as specified and directed by Engineer-in-Charge. |
| 31 | Supply and Fixing solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MSD square tube etc complete all as specified and directed by Engineer-in-Charge. |
| 32 | Material and Labour Providing precast cement concrete type 1:2:4 (20mm grade Aggregate) as landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set and joinedin CM1:4 complete all as specified and directed by Engineer-in-Charge. |
| 33 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Complete all as specified and directed by Engineer-in-Charge. |
| 34 | Supply and Fixing 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), using 2nd class hard wood edges of frming plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc , sizes of members of shutters as specified in SSR Part-I, Section8, Clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and as directed by Engineer-in-Charge. |
| 35 | Supply and Fixing 30mm thick flush shutter, solid core construction with block board core and plywood face panels commercial type on both side complete all as specified and directed by Engineer-in-Charge.. |
| 36 | Supply and Fixing 35 mm Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge. |
| 37 | Supply and Fixing factory made solid PVC moulded door shutter, 30 mm thick 2mm thick 3D wood grain Moulded PVC sheet polyurethane painted on the front face & 2mm plain colour PVC sheet on back face complete all as specified and as directed by by Engineer-in-Charge. . |
| 38 | Material and Labour for framed work such as grills or grating and gate etc with ends ofr bars shouldered as framed guard bars conforming to Fe-410-0 or 310-0 all as specified and directed by Engineer-in-Charge. |
| 39 | Supply and Fixing Mild steel butt hinges medium weight , cold rolled, 75 mm, ISI marked, complete all as specified and as directed by Engineer-in-Charge. |
| 40 | Supply and Fixing Mild steel butt hinges medium weight , cold rolled, 100mm, ISI marked,complete all as specified and as directed by Engineer-in-Charge. |
| 41 | Material and Labour barrel tower bolts stove enamelled black of size 200 mm complete all as specified and as directed by Engineer-in-Charge. |
| 42 | Supply and Fixing 150mm long ( D type) Aluminium anodised handel or extured section (IS marked ) complete all as specified and directed by Engineer-in-Charge. |
| 43 | Supply and Fixing Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed by Engineer-in-Charge. |
| 44 | Supply and Fixing Mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge. . |
| 45 | Supply and Fixing galvanised mild steel wire cloth 0.56mm nominal dia of wire and width of aperture 1.18mm & fixed with tinned tacks or galvanised wire staples complete all as specified and as directed by Engineer-in-Charge. . |
| 46 | Material and Labour joint free Non-Skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each 600X600 tile exceeding 0.18 sqm but not exceeding 0.36sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of screed bed 15mm thick in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. . |
| 47 | Material and Labour joint free Non-Skid ceramic coloured tiles 6-7mm thick (square/rectangular) area of each 400 x 400 Skirting Etc and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of screed bed 15mm thick in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. . |
| 48 | Material and Labour for glazed ceramic coloured tiles in verticle surfac/450mmx300mmx7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat 10mm thick cement mortar in 1:4 complete all as specified and directed by Engineer-in-Charge |
| 49 | Material and Labour Granite (of any type) tiles 20mm thick for machine cut, bedded to cooking platform and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and Screed bed or bedding of mortar 15mm cm 1:4 thick for laying floor finiesh complete by Engineer-in-Charge. |
| 50 | Material and Labour machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 51 | Description all as per serial item No 50 above but in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement to match complete over and including 10mm thick cement screed in CM 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 52 | Roundidng to edges of stone slabs , such as in steps, cooking plateform, and other similar situation complete all as specified and directed by Engineer-in-Charge. . |
| 53 | Material and Labou for PCC 1:3:6 Normal mixture type C-0 using 12.5 mm gradecrushing stone aggregate as in filling of prssed steel door frame / Chowkats complet all as specified&Directed by Engineer-in-Charge. . |
| 54 | Taking up or down 15mm bore steel water tubing & connections, including cleaning for refixing or offering credit as per schedule of credit complete all as specified and directed by Engineer-in-Charge.. |
| 55 | Description all as per serial item No 54 herein before but 20mm bore complete all as specified and directed by Engineer-in-Charge. |
| 56 | Supply and Fixing 15mm bore medium grade galvanised steel water tubing with all fitting & fixed complete to walls or ceiling or laid in floors all as specifeid and directed by Engineer-in-Charge.. |
| 57 | Supply and Fixing 20mm bore medium grade galvanised steel water tubing with all fitting & fixed complete to walls or ceiling or laid in floors all as specified and directed by Engineer-in-Charge.. |
| 58 | Refixing 15mm bore old steel water tubing & connection in new or old position of wall, ceiling, floor etc complete all as specified and directed by Engineer-in-Charge. |
| 59 | Description all as per serial item No 58 herein before but 20mm bore complete all as specified and directed by Engineer-in-Charge. |
| 60 | Supply and Fixing in replacement vitreous china wash down water closet pan ( pedestal pattern ) white , with and including stainless steel Jet , with and including 110 dia ‘P’ or ‘S’ trap , with and including seat cover complete all as specified and as directed by Engineer-in-Charge. |
| 61 | Supply and Fixing in repair 10 ltr capacity PVC valveless , syphonic action type flushing cistern, low level, white, with inlet ball valve, float and handle including brackeet and 32mm dia flush pipe of polyethylene of low or high density for low level, PVC Connection cistern complete all as specified and directed by Engineer-in-Charge. |
| 62 | Supply and Fixing Vitreous China wash basin ,angle back size 450X300 mm white , waste pipe,PVC Connection complete all as specified and directed by Engineer-in-Charge |
| 63 | Supply and fixing in replacement 15mm Long body bore bib tap cast copper alloy, fancy type (ISI marked) with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & as directed by Engineer-in-charge. |
| 64 | Supply and Fixing in repair 15mm dia angle valve chromium fancy type , screwed down, high pressure , with crutch or butterfly handle , screwed both ends for iron pipe or for union complete all as specified and directed by Engineer-in-Charge |
| 65 | Supply and fixing in replacement 15 mm bore brass CP , WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed, complete all as specified and directed by Engineer-in-Charge. |
| 66 | Tacking down of shutter of any decription in same opening exc 1 sqm and not exc 2 sqm complete all as specified and directed by Engineer-in-Charge |
| 67 | Dismanting boarding any description in any position with nails complete all as specified and directed by Engineer-in-Charge |
| 68 | Material and Labour Weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all, as specified and directed by Engineer -in -Charge. |
| 69 | Material and Labour for preparing new surface of wood of any decription , not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all, as specified and directed by Engineer-in-Charge |
| 70 | Material and Labour painting to steel surfaces of any description over 10 Cm width or girth including preparation of new or untreated surfaces and applying with two coats of synthetic enamel paint over one coat of red oxide primer all as specified and directed by Engineer -in -Charge. |
| 71 | Supply and Fixing in repair 75mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls (ISI Marked) complete all as specified and directedby Engineer-in-Charge |
| 72 | Description all as per serial item No 71 above but 110mm bore (ISI Marked) complete all as specified and directed by Engineer-in-Charge |
| 73 | Supply and Fixing in repair 75mm PVC(SWR) bend any radius (ISI Marked) complete all as specified and directed by Engineer-in-Charge |
| 74 | Description all as per serial item No 73 above but 110mm dia (ISI Marked) complete all as specified and directed by Engineer-in-Charge |
| 75 | Supply and Fixing in repair 75mm PVC(SWR) junction single(single T) equal or unequal (ISI Marked) complete all as specified and directedby Engineer-in-Charge |
| 76 | Description all as per serial item No 75 above but 110mm bore of pipe (ISI Marked) complete all as specified and directed by Engineer-in-Charge. |
| 77 | Material and Labour in repair 75mm PVC(SWR) floor trap with grating including jointing with solvent cement (ISI Marked) complete all as specified and directed by Engineer-in-Charge |
| 78 | Description all as per serial item No 77 above but 110mm (ISI Marked) complete all as specified and directed by Engineer-in-Charge |
| 79 | Supply and Fixing in repair 75mm PVC(SWR) vent cowl (ISI Marked) complete all as specified and directed by Engineer-in-Charge |
| 80 | Description all as per serial item No 79 above but 110mm (ISI Marked) complete all as specified and directedby Engineer-in-Charge |
| 81 | Supply and Fixing 500 Ltrs capacity rotational moulded polyethylene water storage tanks(cylinderical vertical with closed top) hoisted and fixed in position all as specified and directed in SSR Part-I includidng dismantling existing water tanks and removing to store complete all as specified and directed by Engineer-in-Charge |
| 82 | Supply and Fixing 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge |
| 83 | Material and Labour 18/19mm thick Pre-laminated board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screw to timber frame including taking down existing board of any description complete all as specified and directed by Engineer-in-Charge. |
| 84 | Material and Labour for Extra over rates of block board or veneered particle board for external teak wood 18/19mm thick lipping, 6mm thick fixed with nails Complet All as specified and Directed by Engineer-in-Charge |
| 85 | Supply and Fixing Continous ( Piano ) hinges,mild steel , bright finish or electrogalvanised width of flaps ( when open ) in 30 mm complete all as specified and directed by Engineer-in-Charge |
| 86 | Supply and Fixing 150mm hasp and staple, mild steel, wire type stove enamelled black, including bolt to hinge plate and fixed with screw. complete all as specified and directed by Engineer-in-Charge |
| 87 | Supply And fixing PVC bathroom cabinet of ABS material of size 45X60 cm complete all as specified and directed by Engr- in- Charge |
| 88 | Supply and Fixing 150 mm chromium plate shower rose with or steel swivel joints any size including fixing steel pipes or union complete all as specified and directed by Engineer-in-Charge. |
| 89 | Supply and Fixing CP 15mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed ,but fancey type, chromium plated with long shank and cup ( concealed type) complete all as specified and directed by Engineer-in-Charge. |
| 90 | Supply and Fixing sink made of stainlesssteel 1mm thick kitchen or laboratory with plug washer wast including bedding in cement motar on draff wll including fixing cantiliver bracket and connection union to pipe overal size 495X420 mm bowl size 410mm X300X160mm complete all as specified and directed by Engineer-in-Charge. |
| 91 | Supply and Fixing CP Towel Raill 600mm long with chrominium plate brass screws and wooden and plastic cleats (minium weight 190 grm ) fixed in repair complete all as specified and directed by Engineer-in-Charge. |
| 92 | Supply and Fixing stainless steel Curtain /Drapery rod 20mm dia as approved colour /design in one length with clamps ,rings,ball shaped konbs at both end all as complete as specified and directed by Engr-in Charge Please Enable Macros to View BoQ information |
| 93 | Supply and Fixing stainless steel Curtain /Drapery rod 20mm dia as approved colour /design in one length with clamps ,rings,ball shaped konbs at both end all as complete as specified and directed by Engr-in Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysDec 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender